Factory Animal Feed Grinder Drop-shaped Hammer Mill
(2022年07月19日)1.Advanced technology
With reasonable technology, high capacity and low energy consumption.
2.Automatic and Centralized control
Centralized control: the analogue panel is adopted. All machines can be interlocked and safety, alarm device is available. The operation is simple and convenient;
3.Multifunction for different material production
The production line could be designed to produce different feed.
4.Imported"NSK"bearings to ensure life; Nylon direct drive coupling rod, a large compensation for displacement,effectively prevent the bearing heat phenomenon.
5.Be tested by the high-precision balancing machine,then the hammer mill run more smoothly ,which reduces noise and prolongs bearing's life.
6.With adjustable hammer screen screen and optimized arrangement of hammer pieces ,it can fully meet the coarse and fine crushing requirements.
7.Widely used in large and medium-sized feed factories to produce high-grade poultry feed.aquatic feed and to crush particles in alcohol plants,citric acid plants,food factories.
Model
Power(kw)
Hole of screen
(mm)
Capacity(t/h)
Outside size(mm)
A
B
C
SFSP66×60
55
1.0
3.0-5.0
2250
1125
1200
2.0
6.0-9.0
75
1.0
4.0-6.0
2.0
7.5-12
SFSP66×80
90
1.0
5.0-7.0
2580
1125
1200
2.0
9.0-14
110
1.0
6.0-8.0
2.0
11-16
SFSP66×100
132
1.0
8.0-12
2930
1125
1200
2.0
14-20
160
1.0
11-15
2.0
17-24
The above parameters are the indexes of the following conditions: the raw material is corn, the moisture is less than 13%, the bulk density is not less than 0.71t/m3, and air intake per square meter is not less than 55m3 /min.
- このできごとのURL:
コメント