Guangzhou Anern Energy Technology Co., Ltd

Warehouse LED High Bay Light(2024年02月21日)

anerngroup — 2024-02-21T12:11:25+0900

https://www.anerngroup.com/products/warehouse-led-high-bay-light/

Warehouse LED high bay light uses high-precision fully automated equipment to form the one-time molding aluminum Fin cooling shell with a good heat dissipation effect. Adopting multiple SMD 3030 LED chip with high power, high light efficiency and high CRI, the light exerted by our commercial industrial high bay led lights is uniform. Equipped with Taiwan Mingwei round power supply and respirator, this warehouse LED high bay series can effectively prevent the fog from being generated due to the environmental temperature difference, and it has good waterproof and dustproof performance. With a long life span and low light decay, Anern's industrial LED high bay lights can be widely used in various harsh outdoor and indoor environments.

The Details of warehouse high bay lighting(UHL04)
Warehouse LED High Bay Light
The independent LED module heat dissipation design ensures the lights life span.

Warehouse Led High Bay Light
Each LED module of this industrial LED high bay series can be disassembled independently, more convenient for later maintenance.

Commercial High Bay LED Lights
IP65 waterproof structure design, suitable for both indoor and outdoor.

Warehouse LED High Bay
The external power supply bracket of Anern's commercial high bay led lights is easy to install and remove, convenient for the maintenance and replacement of the power supply.

Anern industry group limited, as an excellent led street light manufacturer, offers a wide range of led light street light for you to choose from.

Tempered glass cover LED Street Light(SLN2)(2024年02月21日)

anerngroup — 2024-02-21T12:10:54+0900

https://www.anerngroup.com/products/tempered-glass-cover-led-street-light-sln2/

AN-SLN2 series is one of Anern's best-selling engineering ip67 led street light. The housing of these waterproof led street lights is made of integral die-casting, which has high strength and strong wind resistance. The light source of this LED street lamp is equipped with toughened glass whose waterproof level is up to IP67. The position where the power supply is placed can be opened manually, which facilitates subsequent maintenance and replacement by engineers.

Advantages of Tempered glass cover
Led light is now very common. The general LED light is equipped with a lampshade or protective cover. The existing LED lamps usually use ordinary glass as their protective cover. The ordinary glass is not good enough because its impact resistance and anti-explosion performance are not good. Therefore, it is not very safe to use. At the same time, it is easy to produce glare, thus affecting normal use. Additionally, the general glass heat dissipation is not good enough. Under long-term use, it shall easily burst due to internal overheating.

To solve the above problem, the Anern AN-SLN2 series of LED street lamps adopt a cover made of a special 10mm thick toughened glass material. The AN-SLN2 series of LED street lamps are designed to Resist 4J high energy impact, thermal fusion, and up to 90% light transmittance, which can prevent against the impact of heavy objects.

The Production of Tempered glass cover LED Street Light(SLN2)
LED street lamps are the main engineering lighting products. Our company strictly follows the international standards for LED street lamp production and carries out a detailed division of labor for the assembly process of each street lamp to ensure that each process has quality inspections. The final product will also undergo at least 48 hours of continuous aging to ensure that every street lamp can meet the client's requirements.

For more information about anern solar light, please feel free to contact us!

If you are looking for a reliable china led light company, don't hesitate to contact us!

T8 LED Tube Light(2024年02月21日)

anerngroup — 2024-02-21T12:10:25+0900

https://www.anerngroup.com/products/t8-led-tube-light/

T8 LED lamp uses a white LED chip as the light source. The shell of our LED series T8 tube is acrylic/aluminum alloy. As the outer cover is made of a PC tube, Anern's led series integrated t8 tube holds the high-temperature resistance up to 135 degrees. Our T8 integrated LED tube have the same dimensions and calibers as traditional fluorescent lamps. There are three lengths: 60cm, 120cm, and 150cm, and the power choices of our T8 SMD LED tube ranges from 10W, 18W to 22W respectively. The bracket of the T8 LED tube is common with the traditional fluorescent tube and can be directly replaced. As a professional t8 led tube manufacturer, Anern has high-quality t8 led tube for sale at reasonable prices. Feel free to contact us for more info about our LED tube lamp.

The Production of T8 LED tube light
Professional tube light factory, Anern solar company provides package box customized service. Our product has received the favor of distributors and wholesalers everywhere with the advantage of no intermediate price spread.

For more information about anern solar street light and led bulb light, please feel free to contact us!

T5 LED Tube Light(2024年02月21日)

anerngroup — 2024-02-21T12:09:59+0900

https://www.anerngroup.com/products/t5-led-tube-light/

T5 LED tube light is an led tube with a 5/8-inch diameter, which is mainly used in lighting scenes such as factories, warehouses, supermarkets, and offices. Anern LED series t5 led tube light fixture adopt the style with a support bracket. As there is no need to purchase separately, the installation of our T5 dimmable led tube is simpler. With the development of technology, now t5 led integrated tube light fixtures are able to gradually replace T8 SMD LED Tube, and can be the same illuminance, lifespan and stability as T8 tubes.

The Production of t5 led integrated double tube light
With 3000 square meters of LED light production and workshop and professional quality control, Anern can provide the most cost-effective LED tubes and maximize profit margin for distributors in the industry.

FAQ of T5 LED Tube Light
QHow to install t5 led tube light?
A
To install a led series t5 tubes light, first turn off the power supply at the circuit breaker. Remove the old fluorescent tube by gently twisting it and pulling it out of the sockets. Next, remove the ballast according to the manufacturer's instructions. Insert the LED split t5 tube into the sockets, making sure it's aligned and secured. Turn the power back on and test the light. Dispose of the old fluorescent tube and ballast properly. Rewiring the fixture may improve the light output and energy consumption. Ensure safety and consult a licensed electrician if necessary.

QHow to fix t5 led tube light？
A
To fix a T5 LED tube light, follow these steps:

Turn off the power supply to the fixture before working on the LED tube light to prevent electrical shock. Check the connections at both ends of the LED tube light to ensure they are properly seated. Replace the ballast with a compatible LED driver if the LED tube light still doesn't work. Verify the voltage of the LED driver with a multimeter to ensure it is within the acceptable range for the LED tube light. Replace the LED driver with a compatible one if the voltage is correct but the LED tube light still doesn't work. Replace the LED tube light itself if none of the above steps work.

QHow to replace t5 led tube light?
A
To replace a T5 LED tube light, follow these steps:

Turn off the power supply to the fixture.

Remove the old T5 fluorescent tube light from the fixture by gently twisting it and pulling it out.

Insert the new LED split t5 tube by lining up the pins at both ends of the tube with the slots in the fixture.

Gently push the tube light into place until it clicks.

Turn on the power supply to the fixture to test the new T5 LED tube light.

Dispose of the old T5 fluorescent tube light properly.

For more information about t5 led tube price and anern solar power system, please feel free to contact us!

If you are looking for a reliable led flood lights supplier and t5 led tube light factory, don't hesitate to contact us!

Solar Street Light(2024年02月21日)

anerngroup — 2024-02-21T12:09:35+0900

https://www.anerngroup.com/products/solar-street-light/

As one of the professional street led solar light factory and solar street lighting system supplier in china, Anern can offer you high-quality china solar street lighting system and the best solar street lights at good prices. Supply solar street light with camera and motion sensor. Supply 60W 80W 100W 120W all in one china street solar light and all in two china street light solar to meet your high requirements for business and project. Feel free to contact us now!

Advantages of china solar panel street light
More than 13 years of practical experience in solar light street lights.

Participated in large-scale solar lighting projects in more than 90 countries.

As a mature solar street light company, Anern has 20 product-related patents.

A complete product line from traditional split solar street lights to smart all-in-one solar street lights.

Have a professional pre-sales and after-sales team.
Provide scientific solar lighting solutions.

Solar LED Streetlight VS Traditional Street Light
Illumination comparison
Using solar power, the street solar led lights can reach the same illuminance flux of 250W as the high-pressure sodium lamp, which greatly reduces the power consumption; while using high-pressure sodium lamps or mercury lamps, the power of the traditional street lights cannot be lower than 250W.

Electricity cost comparison
The electricity cost of using a 57W china solar street lamp in one year is only 20% of the electricity cost of using a 250W ordinary high-pressure sodium lamp in a year, which greatly saves electricity costs and is an ideal energy-saving product.

Use temperature comparison
Compared with ordinary street lights, the LED street lights produce lower temperatures during use, and continuous use will not produce high temperatures.

Safety performance comparison
The current high-pressure sodium lamps and mercury lamps on the market use high-voltage point poles to excite X-ray illumination, which contains harmful metals such as mercury, and harmful rays; compared with solar street lamps, street solar led lights are safe and low-voltage. They can greatly reduce the potential safety hazards during installation and use.

Environmental protection performance comparison
Ordinary street lamps contain harmful metals, and the spectrum contains harmful rays. In contrast, the solar street lamp LED street lamp has a pure spectrum, no infrared and ultraviolet rays, no radiation, no light pollution, and no harmful metals, and the waste can be recycled. It is a typical green lighting product.

Comparison of service life and quality
The average service life of ordinary street lights is 12,000 hours. Replacing street lights is not only costly but also affects traffic. Construction in tunnels and other places is especially inconvenient; the average life of solar light street lights is more than 50,000 hours.

2. Dig the pole foundation pit: At the determined pole installation position, excavate the pole foundation pit according to the height and width of the ground cage, and the foundation pit should be slightly wider than the width of the ground cage. If the surface soil is soft, the depth of the excavation should be deepened, and other facilities (such as cables, pipes, etc.) at the excavation location should be confirmed and protected.

3. Pour the foundation anchor bolts cage of the pole: In the excavated foundation pit, place the foundation anchor bolts cage in the pit and keep the screw of the cage exposed to the ground level. Then use concrete to cast and fix the embedded parts. During the pouring process, stir and be evenly balanced to ensure the compactness and firmness of the entire embedded part.

Moreover, the power consumption of solar-powered street lights is much lower than traditional types. In terms of service life. theoretically, solar street lights' lifespan is 1-2 times of traditional street lights. So solar street lights have become the priority choice for road lighting construction in the world.

FAQs of Anern Solar Street Light
QCan solar street LED lights replace traditional street lights?
A
The design of Anern solar street light is completely in accordance with international road lighting standards. It can completely replace the traditional street light and has no wiring required, maintenance-free, long service life.

QWhere can solar LED streetlight be used?
A
As a professional solar light supplier, Anern has a different type of solar street light to meet international standards of highway road, or rural road, always has one option for you.

QWhat are the main type of solar panel and battery used in the solar panel street light?
A
Solar panel used imported high-efficiency Monocrystalline, the battery is new LifePo4 lithium battery.

QWhat's the main different of different models?
A
The differences of Anern solar street lights are mainly in housing, solar panel, battery, and some special function.

QHow long is the lighting time of solar LED streetlight?
A
Anern solar LED streetlight can be lighting for more than 12hours per day, and have a backup of at least 5 rainy days.

For more information about anern solar street light price and led flood lights, please feel free to contact us!

Solar Panel(2024年02月21日)

anerngroup — 2024-02-21T12:09:07+0900

https://www.anerngroup.com/products/solar-panel/

Solar cell modules, also called solar power panels, are the core part of solar power generation systems and the most valuable part of solar power generation systems. It has the characteristics of long service life and strong mechanical resistance to pressure. Its function is to convert the radiant energy of sunlight to electric energy and send it to the battery bank for storage, or it can be used directly to drive the load. For a solar power panel, the solar cell module plays an important role in its funtion. For example, a good battery storage system for solar panel can provide a better using experience.

As a mature poly solar panel supplier & monocrystalline solar panel manufacturers in China, we have types of monocrystalline solar panels for sale, including shingled solar pv module, half cut monocrystalline silicon and polycrystalline silicon. The difference between mono and poly solar panels will be displayed in the follows.

The Structure of Solar Panel
Tempered glass: It is used to protect the main body of solar cells, and its selection requirements are that the light transmittance must be high and tempered.

EVA: Used to bond and fix the tempered glass and the main body of the power generation. The quality of the transparent EVA material directly affects the service life of the components.

Cells: The main function is to generate electricity. The mainstream in the market is crystalline silicon solar cells.

Backplane: The role is to seal, insulate, and waterproof.

Aluminum alloy: protect the solar panel, its certain sealing and supporting function.

Junction box: protects the entire power generation system and acts as a current transfer station.

Silicone: Sealing function, used to seal the junction between the component and the aluminum alloy frame, component and junction box.

Comparison Between Monocrystalline and Polycrystalline Solar Panels
The appearance and photoelectric conversion efficiency of monocrystalline and polycrystalline solar power panels are different due to their different processing techniques.

Appearance

The four corners of the monocrystalline solar cell modules are arc shape without a pattern on the surface, and they are dark blue, packaged nearly black. While the four corners of the polycrystalline solar panels are square, and there are patterns similar to the snow crystal pattern on the surface. Polycrystalline solar panels are usually light blue.

Photoelectric conversion efficiency

At present, the photoelectric conversion efficiency of monocrystalline solar panels is about 15%, and the highest reaches 24%. The photoelectric conversion efficiency of polycrystalline solar panels is about 12%.

How Solar Panels Work?
Sunlight shines on the semiconductor p-n junction to form new hole-electron pairs. Under the action of the p-n junction electric field, holes flow from the p-region to the n-region, and electrons flow from the n region to the p-region, and a current is formed after the circuit is connected. This is how the solar panel systems work.

FAQs of Solar Panel
QWhich one should I choose for monocrystalline silicon and polycrystalline silicon solar panels?
A
Monocrystalline silicon and polycrystalline silicon solar panels have their own advantages and disadvantages, and their poly solar panel price are different. Please choose according to project requirements or local hot-selling types.

QWhy is the price per watt of a small-watt solar panel more expensive than a large-watt solar panel?
A
The cost of solar panels is affected by cell utilization, labor, and other accessories and consumables. The production of low-power solar panels is far greater than high-power solar panels in terms of cell utilization and labor. In principle, solar panel power The larger the price, the higher the price/performance ratio.

QHow is the price of solar panels calculated?
A
Generally, the price of solar panels is calculated according to the price per watt. For example: the price of a 350 solar panel is $0.22*350W.

QCan samples be provided for solar panels?
A
Due to the special structure and shape of solar panels, samples are likely to be damaged even if protective measures are taken during international transportation. We will not compensate for damages in the logistics process. We use each wooden pallet as the minimum order quantity. If you have any questions about the product and are not at ease, you are also welcome to visit the factory.

Anern solar, as an excellent led light manufacturer, offers a wide range of led light street light for you to choose from.

Solar Light(2024年02月21日)

anerngroup — 2024-02-21T12:08:22+0900

https://www.anerngroup.com/products/solar-light/

Solar street lights use solar energy as the energy source. Capable of realizing conversion from photovoltaic to electricity through solar panels, the solar powered lights produced by Anern use their batteries to store electricity during the daytime, and power the light through the controller at night to achieve the required functional lighting. As a mature china solar lights suppliers, Anern is a comprehensive enterprise with 12 years of experience in R&D, production, and sales of China solar lights. Anern owns dozens of product-related patents, and our different types of solar lights are sold to more than 100 countries around the world, participating in the completion of thousands of government solar lighting projects.

Solar Light
How Do Solar Lights Work
Solar lighting uses solar panels to absorb solar radiation during the daytime and converts it to electrical energy. It is stored in the battery bank through a charge and discharge controller. At night, when the daylight gradually decreases to about 10lux and the solar panel open circuit voltage is about 4.5V, the controller shall detect this voltage value and then direct the battery to discharge and power the LED light source to realize functional lighting.

Solar Lights Replacement
Anern solar-powered light has engineering quality. We promise that the raw materials we used do not contain any defective or second-hand product.

When solar-powered lights failure occurs, please check the following places:

Please check whether the solar panel wire is connected to the lamp cap wire and tighten it.

When connected to the solar panel line, the battery indicator (red light) of the controller will always be on, if not on, the battery may be out of power. Place the lamp cap and the solar panel in the sun at the same time and then observe the state of the controller indicator, to see whether the red light is always on and the blue light flashes slowly; If the indicator lights are not on, please consult the engineer of Anern for further guidance.

Regularly check the remote. Press the remote control to see is there any flashing at the controller. If there appears no flashing, adjust the remote distance and then press the remote again to send the signal. If this does not work, the remote of the solar-powered lights may be broken or you need to charge the remote.

Application of Solar lights
Collector, arterial, and highway lighting

Parking lots: illumination in both open and covered parking lots

Emergency phones and lights are located along the paths/trails. Lighting for tennis courts and running tracks

Lighting along the perimeter of the barrier

Portable Power and lighting for emergencies

Backup for Brown Out/Black Out Lighting

SCADA and water treatment are examples of remote activities.

Construction sites and high-risk or dark locations require security lighting and surveillance cameras.

DOT Bridges with obsolete or damaged electrical wiring

Hazard warning lights are installed at stop signs, crosswalks, and on met-towers.

Rest spots and restrooms in remote areas

Government and military applications, both permanent and temporary

For more information about china solar lighting system, please feel free to contact us!

Anern solar, as an excellent led light manufacturer, offers a wide range of led light street light for you to choose from.

Solar LifePo4 Lithium Battery(2024年02月21日)

anerngroup — 2024-02-21T12:07:50+0900

https://www.anerngroup.com/products/solar-lifepo4-lithium-battery/

In the field of solar lighting and energy storage in the past two years, lithium iron solar battery has gradually replaced traditional batteries to become the new mainstream of the market. Compared with traditional lead-acid and gel batteries, lithium lifepo4 solar battery has the characteristics of high working voltage, high energy density, low self-discharge rate, and no memory effect. The lithium batteries for solar power storage independently developed by Anern is mainly used to match solar energy storage systems, whether lifepo4 battery for solar lithium storage is a household power supply system or a commercial power supply system.

he Details of Solar LifePo4 lithium battery
12V Lithium Ion Battery For Solar
Wall-mounted appearance design, simple installation, convenient use, and save more space.

Li Ion Solar Battery
With an LCD display and battery indicator, you can clearly and intuitively understand the various states of battery usage.

Lithium Ion Battery Solar Charger
Self-developed BMS system is safe and stable. At the same time, it can realize up to 16 groups of batteries in parallel, which can flexibly expand the power storage of the system.

Lithium Iron Phosphate Battery Solar
Adopt brand new wall mounted lithium battery, reject second-hand batteries, ensure the safe and stable operation of the batteries, and have a service life of up to 8 years.

The Production of Solar LifePo4 lithium battery
Anern insists on innovating the craftsmanship spirit of enabling products to provide customers with professional lithium ion battery for solar system solutions. Our automatic lithium batteries for solar power laser spot welding machine with advantages of fast welding speed, small heat-affected zone, small workpiece deformation, a high degree of automation, and good consistency.

Anern industry group limited, as an excellent led street light factory, offers a wide range of led light street light for you to choose from.

Split Solar Street Lights Project for Roadway in South Africa(2023年01月24日)

anerngroup — 2023-01-18T16:24:22+0900

https://www.anerngroup.com/split-solar-street-lights-project-for-roadway.html

Project Name: Split Solar Street Light Project for Roadway in South Africa
Date: May 2017
Project type: Municipal solar lighting project
Project Site: South Africa
Quantity and specific configuration: 660pcs 100W split solar roadway lights with 6 meter poles
Description: This project is a demonstration site of solar street lighting on a road connecting cities in South Africa. As one of the demonstration projects of solar light for road, customers have very strict requirements on the products. In order to achieve 12 hours of full power lighting, We selected 4pcs 100W solar panels to power 60W LED lamps at a reasonable road solar light price. At present, the project has been running for 3 years, and the all in two solar street light there are basically no damage. It is still a successful demonstration road of solar lighting.

As a led bulb light company, we will do our best to meet all the needs of customers.

T8 LED Tube Light(2023年01月23日)

anerngroup — 2023-01-18T16:23:36+0900

https://www.anerngroup.com/products/t8-led-tube-light/

T8 integrated led tube light uses a white LED chip as the light source. The shell of our LED series T8 tube is acrylic/aluminum alloy. As the outer cover is made of a PC tube, Anern's led series split T8 tube holds the high-temperature resistance up to 135 degrees. Our T8 integrated LED tubes have the same dimensions and calibers as traditional fluorescent lamps. There are three lengths: 60cm, 120cm, and 150cm, and the power choices of our T8 SMD LED tube ranges from 10W, 18W to 22W respectively. The bracket of the led integrated t8 tube is common with the traditional fluorescent tube and can be directly replaced. As a professional led tube supplier, Anern has high-quality T8 led tube for sale at reasonable prices. Feel free to contact us for more info about our LED tube lamp.

The Details of T8 LED tube light
With the design of double-ended wiring and anti-leakage, Anern's T8 LED tube lights are more reasonable, more scientific and safer.
Built-in constant current driver, high efficiency, stability.
The CRI of our T8 SMD LED tube series is high as 80RA and it can truly restore the color of the illuminated object.
Large-angle light, larger illuminated area and more uniform light.

The Specification of T8 LED tube light
ModelLED chipFluxCRIWorking Voltage
T8-0.6m-A2-10W LED Tube LightSMD 2835120lm/w>80AC85-265V
T8-0.9m-A2-14W LED Tube LightSMD 2835120lm/w>80AC85-265V
T8-1.2m-A2-18W LED Tube LightSMD 2835120lm/w>80AC85-265V
T8-1.5m-A2-22W LED Tube LightSMD 2835120lm/w>80AC85-265V

The Production of T8 LED tube light
Professional LED tube manufacturer, Anern solar company provides package box customized service. Our product has received the favor of distributors and wholesalers everywhere with the advantage of no intermediate price spread.

If you want to find a reliable led bulb light manufacturer, please contact us, and we will be your best partner.

T5 LED Tube Light(2023年01月22日)

anerngroup — 2023-01-18T16:22:58+0900

https://www.anerngroup.com/products/t5-led-tube-light/

T5 LED tube lights is the led tube with 5/8-inch diameter, which is mainly used in lighting scenes such as factories, warehouses, supermarkets, and offices. Anern LED series T5 tubes adopts the style with a support bracket. As there is no need to purchase separately, the installation of our T5 dimmable led tube is simpler. With the development of technology, now T5 LED integrated tube light fixtures are able to gradually replace T8 SMD LED Tube, and can be the same illuminance, lifespan and stability as T8 tubes.

The Details of T5 LED tube light
With high-end LED chips, Anern's LED series T5 tubes have the features of low light decay and natural color rendering.
Large-beam angle lighting, uniform and bright, different wattage & specifications to meet different needs.
The high-quality light source of our T5 LED lighting has strong stability and the characteristics of non-flickering.
The T5 integrated LED tubes can be connected to each other. The splicing of this LED tube lamp is tight, and you can use them to say goodbye to dark area.

The Specification of T5 LED tube light
ModelLED chipFluxCRIWorking Voltage
T5-0.6m-A2-10WSMD 2835100lm/w>80AC85-265V
T5-0.9m-A2-14WSMD 2835100lm/w>80AC85-265V
T5-1.2m-A2-18WSMD 2835100lm/w>80AC85-265V
T5-1.5m-A2-22WSMD 2835100lm/w>80AC85-265V

The Production of T5 LED tube light
With 3000 square meters of LED light production and workshop and professional quality control, Anern can provide the most cost-effective LED tubes and maximize profit margin for distributors in the industry.

As a LED light manufacturer, we will do our best to meet all the needs of customers.

Solar Street Light(2023年01月21日)

anerngroup — 2023-01-18T16:22:12+0900

https://www.anerngroup.com/products/solar-street-light/

china solar street light manufacturers / solar led street light manufacturers / solar street lights manufacturers in china / solar street light manufacturers / solar led street lights manufacturers
solar street lamps for sale
solar street lights supplier / china solar street light factory / solar led street light manufacturer / solar street light supplier / solar street light manufacturer / solar street light company / solar street light factory

Solar LED street lights are a solar solution that replaces traditional street lights by combining solar energy and LED light sources. Solar panel street lights can not only meet the basic functions of lighting, but they can also provide brightness that can reach 2-3 times the brightness of the traditional ones.
Moreover, the power consumption of solar-powered street lights is also much lower than traditional types. In terms of service life, theoretically the solar street lights' lifespan is 1-2 times of traditional street lights. So solar street lights have become the priority choice for road lighting construction in the world.

As one of the professional china solar street light manufacturers, Anern can offer you high-quality solar street lighting systems and solar-powered street lights at good prices. Feel free to contact us now!

Advantages of Anern LED Street Light China
More than 13 years of practical experience in solar light street lights.
Participated in large-scale solar lighting projects in more than 90 countries.
As a mature solar street light company, Anern has 20 product-related patents.
A complete product line from traditional split solar street lights to smart all-in-one solar street lights.
Have a professional pre-sales and after-sales team.
Provide scientific solar lighting solutions.

Electricity cost comparison
The electricity cost of using a 57W solar light street light in one year is only 20% of the electricity cost of using a 250W ordinary high-pressure sodium lamp in a year, which greatly saves electricity costs and is an ideal energy-saving product.

Use temperature comparison
Compared with ordinary street lights, the LED street lights produce lower temperatures during use, and continuous use will not produce high temperatures.

Anern Solar Street Light Installation
Pour the foundation
1. Confirm the installation position of the solar LED streetlight: According to the construction drawings and the geological situation of the survey site, in the place where there is no shading on the top of the streetlamp, determine the installation position of the pole with a spacing of 20-60 meters as the reference value; otherwise, the pole installation position should be adjusted appropriately.
2. Dig the pole foundation pit: At the determined pole installation position, excavate the pole foundation pit according to the height and width of the ground cage, and the foundation pit should be slightly wider than the width of the ground cage. If the surface soil is soft, the depth of the excavation should be deepened, and other facilities (such as cables, pipes, etc.) at the excavation location should be confirmed and protected.
3. Pour the foundation anchor bolts cage of the pole: In the excavated foundation pit, place the foundation anchor bolts cage in the pit and keep the screw of the cage exposed to the ground level. Then use concrete to cast and fix the embedded parts. During the pouring process, stir and be evenly balanced to ensure the compactness and firmness of the entire embedded part.

Installation of solar street light components
1. Thread the cable of the Anern solar street light through the center hole of the support arm, pass it out from the top of the pole, and then fix the solar LED streetlight on the pole support arm with screws.
2. Fix the solar panel on the bracket with screws. After adjusting the light angle, fix the bracket on the top of the pole with screws.

Fix the pole on the foundation anchor bolts
1. Clean up the residue on the foundation
2. Erect the pole, and fix the baseplate on the four anchor bolts incorrect position. If the condition allows, it is recommended to use a crane. Tighten the screws of the anchor bolts and make sure the pole of the street solar led lights is fixed with the anchor bolts firmly.

FAQs of Anern Solar Street Light
Q：Can solar street LED lights replace traditional street lights?
A：The design of Anern solar street light is completely in accordance with international road lighting standards. It can completely replace the traditional street light and has no wiring required, maintenance-free, long service life.

Q：Where can solar LED streetlight be used?
A：As a professional solar street lights supplier, Anern has a different type of solar street light to meet international standards of highway road, or rural road, always has one option for you.

Q：What are the main type of solar panel and battery used in the solar panel street light?
A：Solar panel used imported high-efficiency Monocrystalline, the battery is new LifePo4 lithium battery.

Q：What's the main different of different models?
A：The differences of Anern solar street lights are mainly in housing, solar panel, battery, and some special function.

Q：How long is the lighting time of solar LED light street light?
A：Anern solar LED streetlight can be lighting for more than 12hours per day, and have a backup of at least 5 rainy days.

We can offer kinds of street solar lights for sale, and the solar street light price is low, anything you need, please contact us.

Solar Light(2023年01月20日)

anerngroup — 2023-01-18T16:21:35+0900

https://www.anerngroup.com/products/solar-light/

Different Types of Solar Light For Sale
Solar Street Light
These bulk solar light china are mainly developed to illuminate large areas with the highest intensity of light, such as Street Lighting, Roadway Lighting, Pathway Lighting, Ramp Lighting, Sidewalk Lighting.

Solar Garden Light
Coupled with unique optical designed, these China solar lights with high luminous efficiency can be irradiated to a wider area. They provide a perfect way to emphasize the beautiful landscaping in your garden.

Solar street lights use solar energy as the energy source. Capable of realizing conversion from photovoltaic to electricity through solar panels, the solar powered lights produced by Anern use their batteries to store electricity during the daytime, and power the light through the controller at night to achieve the required functional lighting. As a mature solar light supplier and solar light manufacturer, Anern is a comprehensive enterprise with 12 years of experience in R&D, production, and sales of China solar lights. Anern owns dozens of product-related patents, and our different types of solar lights are sold to more than 100 countries around the world, participating in the completion of thousands of government solar lighting projects.

How Do Solar Lights Work
Solar lighting uses solar panels to absorb solar radiation during the daytime and converts it to electrical energy. It is stored in the battery bank through a charge and discharge controller. At night, when the daylight gradually decreases to about 10lux and the solar panel open circuit voltage is about 4.5V, the controller shall detect this voltage value and then direct the battery to discharge and power the led bulb light source to realize functional lighting.

Solar Light Components
Batteries
There are two main types of batteries for solar-powered lights, lead-acid batteries, and lithium batteries.
The advantages of lead-acid batteries are that they have been used in solar lighting for the longest time, and are more stable and cost-effective. The disadvantage is that the lead-acid battery is large in size and can generate serious environmental pollution during production, and its price fluctuation is big due to the effect of the lead cost.
The advantage of lithium batteries is that under the same capacity, their volume and weight are smaller than lead-acid batteries, the energy density is bigger, and its use is more flexible. The disadvantage is that its price is higher compared with a lead-acid battery. However, with the technical development and increasing high acceptance in the market, the lithium battery cost has gradually decreased and becomes the main battery type used in solar lighting.

Solar panel
Solar PV modules, also called solar panels, are the core part of the solar photovoltaic power generation system and the most valuable part of the solar energy system. Its function is to convert the sunshine radiation to electric energy and send to batteries for storage. It can also energize the loads directly.
Controller
The controller mainly plays the role of charge/discharge control and management in the solar lighting system. During the daytime, the solar panel generates electricity and charge to the battery through the controller. At night, the battery of the solar lights is discharged through the controller to supply power to the light source for lighting. When the rainy days are too long, if the battery voltage drops below the controller preset battery lack-of-power voltage, the controller shall cut off the battery power supply. In addition, the controller has an intelligent power mode which can adjust the light source brightness based on battery surplus capacity for energy-saving purposes and can extend lighting time to the maximum in continuous rainy/cloudy conditions.

LED Light Source
LED is the newest generation of light sources. Currently, different types of led lights are widely applied in both outdoor lightings such as street lights, floodlights, garden lights, and also indoor lighting such as bulbs, tubes, ceiling lights, etc.

Solar Lights Replacement
Anern solar-powered light has engineering quality. We promise that the raw materials we used do not contain any defective or second-hand product.
When solar-powered lights failure occurs, please check the following places:
Please check whether the solar panel wire is connected to the lamp cap wire and tighten it.
When connected to the solar panel line, the battery indicator (red light) of the controller will always be on, if not on, the battery may be out of power. Place the lamp cap and the solar panel in the sun at the same time and then observe the state of the controller indicator, to see whether the red light is always on and the blue light flashes slowly; If the indicator lights are not on, please consult the engineer of Anern for further guidance.
Regularly check the remote. Press the remote control to see is there any flashing at the controller. If there appears no flashing, adjust the remote distance and then

FAQs of Anern Solar Lights
Q： How bright are solar lights？
A：First of all, the lighting range of the solar-powered street lights is not fixed and will be affected by the height of the solar street lamp, the power of the lamp head, and other factors. Generally speaking, the illumination range of a 6 meter China solar light is about 20 square meters. The installation distance between two solar-powered lights is best controlled in about ten meters so that the installation of solar street lamps is the best.

Q： How long do outdoor solar lights last？
A：Generally, the batteries of the bulk solar lights will work for about 3-4 years and the solar lights themselves can last for about 10 years or more.

Q：How do i make my solar lights brighter？
A：To make the solar lights shine brighter, you need to make sure the solar panel is adjusted to the right angle so as to receive the solar power as much as possible. Moreover, it is also very important to clean the solar panel on the regular basis.

Q：Should solar lights be left out in the winter？
A：As a professional solar light supplier, Anern produces high-quality solar lights, such as our commercial solar flood lights, that can be left out even in cold weather. Feel free to ask us for more info.

Q：Should you turn solar lights off at night？
A：By turning off the solar lights, you can give the battery a chance of getting a full charge over several days of sunlight. It is up to you to decide whether you would love to turn the solar lights off or not.

Q：Can you charge solar lights without the sun?
A：Solar-powered lights can also be charged when there is no sun, but the amount of charging will vary according to the degree of overcast and rainy days. The bulk solar lights at Anern are all equipped with battery charging and discharging devices, usually, when the sun is full, they will charge themselves. And these solar lights will rely on battery power to maintain the power supply of street lamps on rainy days. On cloudy days when the sun's light is weak, the charging capacity of solar light is relatively weak.

Q：Do outdoor solar lights need rechargeable batteries？
A：Outdoor solar lamps normally require rechargeable batteries because the solar panels of this type of solar light will convert sunlight into electricity, so as to further charge the batteries which will then power the lamps.

Q：What to do when solar lights stop working ?
A：First check whether the controller of the solar-powered lights is broken. If the controller is broken, then you should conduct a timely repair towards the light controller. Then you should observe the recent weather conditions. The normal charging of a solar-powered light should last for about 5-7 hours per day, so if the charging is only up to 2-3 hours such a situation is normal. Finally, you can check whether the battery inside the solar light is broken.

Solar LifePo4 Lithium Battery(2023年01月19日)

anerngroup — 2023-01-18T16:19:14+0900

https://www.anerngroup.com/products/solar-lifepo4-lithium-battery/

In the field of solar lighting and energy storage in the past two years, lithium solar lifepo4 battery has gradually replaced traditional batteries to become the new mainstream of the market. Compared with traditional lead-acid and gel batteries, lithium lifepo4 solar battery has the characteristics of high working voltage, high energy density, low self-discharge rate, and no memory effect. The lithium lifepo4 solar battery independently developed by Anern is mainly used to match solar energy storage systems, whether lifepo4 battery for solar energy storage is a household power supply system or a commercial power supply system.

The Details of Solar LifePo4 lithium battery

Wall-mounted appearance design, simple installation, convenient use, and save more space.
With an LCD display and battery indicator, you can clearly and intuitively understand the various states of battery usage.
Self-developed BMS system is safe and stable. At the same time, it can realize up to 16 groups of batteries in parallel, which can flexibly expand the power storage of the system.、
Adopt brand new lithium iron phosphate batteries, reject second-hand batteries, ensure the safe and stable operation of the batteries, and have a service life of up to 8 years.

The Specification of Solar LifePo4 Lithium Battery
ModelCapacityVoltageMaximum Charging CurrentMaximum Continuous Discharge Current
AN-LPB24200200AH25.6V100A150A
AN-LPB48100100AH51.2V50A100A

ModelAN-LPB-N-24100AN-LPB-N-24200AN-LPB-N-48100AN-LPB-N-48200
Battery TypeLiFePO4
Typical Capacity(AH)100AH200AH100AH200AH
Typical Voltage(V)25.6V25.6V48V48V
Voltage Working Range(V)21.6-29.2V21.6-29.2V40.5-54.75V40.5-54.75V
Working Temperature(°C)Charge: 0-+55°C
Discharge: -20-+60°C
Storage Temperature(°C)-20-+35°C
Nominal Capacity(KWH)2.56KWH5.12KWH4.8KWH9.6KWH
Max. Charge Current(A)50A50A50A50A
Max. Discharge Current(A)100A100A100A100A
Cycle Life>6000
SOC Accuracy<8%
Dimension(mm)580*400*160mm580*400*160mm580*400*160mm770*500*160mm
Weight(kg)32kg54kg55kg85kg
IP GradeIP54
Transportation SOC30%
Cooling Nature
CommunicationRS232, RS485, CAN
CertificationsCE, ROHS, UN38.3, MSDS

The Production of Solar LifePo4 lithium battery
Anern insists on innovating the craftsmanship spirit of enabling products to provide customers with professional lithium battery solutions. Our automatic lithium battery laser spot welding machine with advantages of fast welding speed, small heat-affected zone, small workpiece deformation, a high degree of automation, and good consistency.

As a china led light company, we will do our best to provide more types of related products for sale, anything you need, please contact us.

Solar Lead-acid Battery(2023年01月18日)

anerngroup — 2023-01-18T16:17:02+0900

https://www.anerngroup.com/products/solar-lead-acid-battery/

Solar lead-acid batteries are the longest-used battery in solar power generation. The currently widely used solar storage batteries mainly include lead-acid maintenance-free batteries and gel batteries. These two types of lead acid battery solar are ideally suited for reliable solar power generation systems owing to their characteristics of inherent maintenance-free and less environmental impact.

The Details of Solar Lead-acid battery

Good deep cycle capability, with good overcharge and over-discharge capabilities
Long life, special process design, and long life battery guaranteed by a colloidal electrolyte.
Suitable for different environmental requirements, such as batteries that can be used normally under different conditions such as high altitude, high temperature, and low temperature.
Adopt ABS flame-retardant shell, high mechanical strength, not easy to deform and leak, and strong safety performance.

The Specification of Solar Lead-acid Battery
Item No.Capacity(AH)Voltage(V)Size(mm)Weight(KG)
±4%
AN-GEL12-505012229*138*20814.7kg
AN-GEL12-656512350*167*17916.2kg
AN-GEL12-10010012329*172*21426.20kg
AN-GEL12-12012012406*174*23332.90kg
AN-GEL12-15015012484*171*24038.00kg
AN-GEL12-20020012522*240*21855.50kg
AN-GEL12-25025012520*268*22065.50kg

The Production of Solar Lead-acid battery
Anern insists on innovating the craftsmanship spirit of enabling products to provide customers with professional lead-acid battery/gel battery/AGM battery solutions. Our professional technical personnel, through strict production process control, to provide customers with qualified products and professional technical services.

Difference Between Gel Battery And Lead Acid Battery
solar lead acid battery is the most commonly used type of battery in photovoltaic systems. Though the lead-acid battery has a relatively low energy density, moderate efficiency, and high maintenance requirements, it still has some irreplaceable advantages, such as a long lifetime and low costs compared to other battery types, such as LiFePO4 solar battery.

Gel batteries are one variety of deep cycle sealed cell lead-acid batteries (the other being AGM solar batteries). Both varieties are low-maintenance and suitable for intermittent use - making them a better choice for backup power and off-grid vacation cabins than flooded lead-acid batteries - but while similar, they are not identical. Gel batteries have a longer lifespan than lead-acid batteries. They maintain high performance until they reach end-of-life, at which point their performance simply drops. There's no degradation over time. In addition, the solar gel batteries are also with good overcharge and over-discharge capabilities.

Now the price of china led light is reasonable, if you have needs, please contact us.

How to Set the Timing for Solar Street Light with Remote Control?(2022年09月26日)

anerngroup — 2022-09-20T16:23:48+0900

https://www.anerngroup.com/how-to-set-the-timing-for-solar-street-light-with-remote-control.html

Some people might notice that many street lights have been replaced by the remote led solar street light. This type of street light can be lit by solar energy, and it can be automatically lit at night for people on the street. The solar street light with remote control can sense darkness and dawn. Therefore, how is the solar street light timed?

1. Why can the solar powered garden lights with remote control be timed?

The reason why some types of remote control streetlight can be timed is mainly due to its controller, which determines whether it is opened or closed. In general, the controller is installed in the light door. A controller formed by a lithium battery is directly installed under the solar panel.

The controller can be adjusted manually or by using the remote control solar street light. Currently, most of the solar street lights with remote control are on the market. So, you need to buy a remote control.

2.How to use the timing switch of solar street light remote control to adjust the time?

(1) The time can be adjusted by the solar street light remote control. For example, if you press the "cancel and resume" button, then the letters displayed in the lower-left corner will be hidden. And then adjust the clock button, there will be different function keys. For example, the day of the week or the time (including the minute, etc) can be adjusted before entering the local time.

(2) After pressing the "timing" button, an "open" sign will appear on the screen of the solar street light remote control, which indicates the first time to open it. It will start after entering the correct day of the week, time, and minute. And the timer function key should be pressed again in the end.

(3) The current time will be displayed on the screen after the timing is set. Then, it will be converted into the timing mode, which can be automatically controlled. For example, the solar light with remote control will automatically light up at six o'clock in the evening. And it will automatically turn off at 7 o'clock in the morning.

Anern solar company is a professional led flood lights manufacturer, we provide led bulb light, solar street light with battery and panel, led panel light and etc. Want to know anern solar street light price or more, contact us.

Factory Show(2022年09月25日)

anerngroup — 2022-09-20T16:23:09+0900

https://www.anerngroup.com/factory-show/

In addition to headquarter in Guangzhou, Anern has also set up led solar light factory and offices in Shenzhen, Zhongshan and Zhejiang for production of solar lights, solar panels, batteries and led lights, etc.

In order to satisfy increasing demand of both clients and markets, Anern brings in multiple automatic production lines, and optimizes production process, which ensure products stability and improve the productivity.

Anern solar company is a professional panel led factory, we provide 300w led solar flood light, solar street light with battery and panel, led panel light and etc. Want to know more, contact us.

Difference Between Monocrystalline and Polycrystalline Solar Panel(2022年09月24日)

anerngroup — 2022-09-20T16:22:34+0900

https://www.anerngroup.com/difference-between-monocrystalline-and-polycrystalline-solar-panel.html

Difference monocrystalline polycrystalline solar panel

The background color of the monocrystalline silicon surface is black or light blue, and that of the polycrystalline silicon surface is mostly blue or colorful. Compare monocrystalline and polycrystalline solar panels, the area of polycrystalline solar panels of the same power is slightly larger than that of monocrystalline solar panels.

1. Advantages of monocrystalline and polycrystalline solar panels

Polycrystalline solar panels have good directivity because they receive light in multiple directions. If you block the sun’s rays by a hand and leave a shadow on the surface of solar panels, the reduction of the current generated by polycrystalline solar panels is smaller than that of monocrystalline solar panels. This is the advantage of polycrystalline solar panels, and the price is relatively low.

2. Methods of using energy generation panels of monocrystalline and polycrystalline solar panels

The electricity generated by the energy generation panel is a direct current with positive and negative poles. When charging, the positive and negative poles of the generation panel can be respectively connected to the positive and negative poles of the battery. There is a backflow prevention tube in the wiring box for monocrystalline and polycrystalline panels. When the battery is full, the charging of the battery will automatically stop. So, it has the function of preventing overcharging.

For more information about monocrystalline and polycrystalline solar panel difference, please follow up Guangzhou Anern Energy Technology Co., Ltd. Anenr is a high-tech company dedicated to the development and manufacture of a wide range of LED lighting products and solar products, and provides complete suits of solutions and systems to customers worldwide.All products have UL, TUV, CE, ROHS, FCC certification, and meet a variety of certification requirements of different countries.

So far, Anenr's products have been exported to more than 180 countries and regions, including government customers. It has gained a good reputation and evaluation. Please contact us when necessary.

Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional led street light factory, we provide anern solar light, 300w led solar flood light, led street light 30 watt, smd led street light and etc. Want to know monocrystalline and polycrystalline difference, contact us.

Customized(2022年09月23日)

anerngroup — 2022-09-20T16:21:46+0900

https://www.anerngroup.com/customized.html

What kind of product customization can we provide?

Since its establishment, Anern has been committed to the R&D, production, and sales of personalized solar systems. We have our own team of professional engineers and can provide professional opinions and solutions for different projects.

Products that can be customized include the following:
Solar lighting:
Main road lighting scheme design

Park road lighting design plan

The project tender requires customized solar panels and battery parameters

Regarding solar lighting products, if necessary, we have professional technicians who can provide DIALux analog lighting, which can more intuitively see the lighting effect after the lamps are installed on the road, and make your plan more convincing.

The Sun can generate system:
Hotel power generation system scheme design

Plant power generation system scheme design

Scheme design of farm power generation system

Scheme design of villa power generation system

We can provide suitable solar power systems according to your own electrical load type, total power, daily power consumption, product location, project budget, etc. You can choose whether to let all the electricity be provided by the solar power system or to let the custom solar system be responsible for only part of the electricity.

Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional led street light manufacturer, we provide anern solar panel, 300w led solar flood light, customized commercial solar street lights and etc. Want to know more, contact us.

Commercial Solar Lighting(2022年09月22日)

anerngroup — 2022-09-20T16:21:06+0900

https://www.anerngroup.com/commercial-solar-lighting.html

The development of commercial solar lights

With the development of the economy and the progress of society, people have put forward higher and higher requirements for energy, and the search for new energy has become an urgent issue facing mankind. Because solar power has the advantages of cleanliness, safety, and versatility, and adequacy of resources that are unmatched by thermal power, hydropower, and nuclear power, solar power is considered the most important energy source in the 21st century.

Traditional lighting is mainly based on the third-generation light source and the fourth-generation light source (LED) and uses city electricity as electrical energy to light up the lights. This kind of lighting power supply method requires the country's power grid to be relatively developed and stable, so as to ensure the normal use of lamps, but for some countries and regions, the power grid cannot provide stable power supply every day, and in some remote areas, the difficulty and cost of wiring Too high, these places often have no electricity or even no electricity. Even in places where the power grid is relatively developed and stable, the increasing cost of power generation will inevitably lead to an increase in electricity costs. To solve the above-mentioned problems, it is necessary to find a fundamental solution. Solar energy is a good solution to the problem of expensive and rare electricity consumption. Therefore, solar lighting is developing rapidly, and its devices cover almost the entire lighting field. The market demand for commercial solar landscape lighting products is growing day by day, and the requirements for product quality are also getting higher and higher.

Advantages of commercial solar outdoor lighting

Simple installation. It can be installed independently without digging trenches, burying wires, and backfilling, saving construction costs; there is no concern about power outages, and it can be used in places where there is no electricity.

Less comprehensive investment. There is no need to purchase power capacity-increasing equipment, saving the cost of corresponding supporting equipment.

The solar lamp can realize automatic control, without personnel management, without paying electricity bills, and low operation and maintenance costs.

Energy-saving. It extracts energy from the sun and does not use conventional electric energy, which is inexhaustible and saves operating costs.

Environmental protection. No pollution, no noise, no radiation.

Now, whether it is the construction of government road projects, the lighting of private projects, or the civilian market, solar lighting is a popular choice, and there are more and more project bids and product sales engaged in related products. Before entering this market, you need to understand the relevant popular products and which level of market you are targeting.

Application classification of commercial solar garden lights

Solar street light
Applied to main roads and rural roads, the light source used is mainly an commercial LED solar outdoor lighting source, which is one of the main applications of commercial solar lighting. At present, there are many styles of solar street lights, but they can be summarized into the following categories:

Solar landscape light
Used in squares, parks, green spaces, and other places, mainly using various low-power LED commercial grade solar lights sources, which can achieve better landscape lighting effects without destroying the green spaces. (ISGL02 / 02-D)

Solar garden light
It is mainly used in production facilities such as home gardens, rural trails, factory parks, etc., and mainly uses cost-effective products to ensure a certain brightness and stability. (ISGL05 / SFL02)

Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional led light manufacturing company, we provide anern solar street light, 300w led solar flood light and etc. Want to know more, contact us.

Commercial LED Lighting(2022年09月21日)

anerngroup — 2022-09-20T16:20:32+0900

https://www.anerngroup.com/commercial-led-lighting/

Anern - LED Lighting Expert
Anern is an expert in the industry of commercial LED lighting. As a China-based commercial led supplier that owns its own manufacturing facilities, we are dedicated to providing our clients the most suitable LED solution with most reasonable price.

In the past 12 years, We have help thousands of manufacturers, Municipal organizations, schools, engineering contractors, enterprises, restaurants, hospitals and hotels make smarter lighting choices.

Browse Anern's commercial grade LED lights collection, including LED outdoor lights and LED indoor lights with high quality.

Why choose LED lighting

As we all know, LED is the revolution of the fourth-generation light source. The first-generation lighting is a variety of flares, the second-generation lighting is a variety of incandescent lamps, like ordinary bulbs and halogen lamps, and the third-generation lighting is various types of gas or arc discharge lamps. Like fluorescent lamps, fluorescent tubes, energy-saving lamps, gas discharge lamps, solid-state lighting based on semiconductor light-emitting diodes (LED) in the late 1990s, replacing incandescent lamps and fluorescent lamps into the general lighting field. Since 2010, LED has become popular in the market. It has quickly gained people’s favor with its energy-saving advantages. With the maturity of LED process technology and industry chain, LED lamps that were originally high-end and high-end lamps gradually returned to reasonable prices and popularization.

Advantages of LED lighting compared to traditional lighting

Environmental protection lamps, Energy saving and emission reduction: Traditional fluorescent lamps contain a large amount of mercury vapor, if broken, the mercury vapor will volatilize into the atmosphere. But LED fluorescent lamps do not use mercury at all, and LED products are also lead-free, which protects the environment.

Efficient conversion, reduce heat: traditional lamps, the luminous efficiency of incandescent lamps is about 15%, and the luminous efficiency of fluorescent lamps is about 50%. However, the luminous efficiency of LED lamps is about 90%.

Quiet and comfortable, no noise: we all know that fluorescent tubes, the start-up is in use, will produce amazing current sound, but LED lamps will not produce noise, it is the best choice for occasions using sophisticated electronic instruments.

Soft light, eye protection: The traditional fluorescent lamp uses alternating current, so it will produce 100-120 strobes per second. LED The lamp converts AC power directly into DC power, will not produce flicker, and protect the eyes.

No ultraviolet rays, no mosquitoes: LED lamps do not produce ultraviolet rays, so they will not be like traditional lamps. There are many mosquitoes surrounding the lamp source. Indoors will become cleaner and hygienic. Tidy.

Adjustable voltage 80V-245V: The traditional fluorescent lamp is lit by the high voltage released by the rectifier, and cannot be lit when the voltage drops. And LED lamps can be lit within a certain range of voltage, and the brightness can be adjusted.

Energy saving, longer life: LED fluorescent lamp power consumption is less than one-third of the traditional fluorescent lamps. The theoretical lifespan of fluorescent lamps is about 10,000 hours, but the lifespan of LED can reach 100,000 hours, which is ten times that of fluorescent lamps!

Sturdy and reliable, long-term use, the LED lamp body itself uses epoxy resin instead of traditional glass, more sturdy and reliable, even if it is hit on the floor LED will not be easily damaged, you can use it with confidence.

Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional china led light company, we provide anern solar lights, 300w led solar flood light and etc.

Solar Flood Light(AN-SFL02)(2022年09月20日)

anerngroup — 2022-09-20T16:19:48+0900

https://www.anerngroup.com/anern-group/products/solar-flood-light-sfl02/

AN-SFL02 series of china solar floodlight is a product developed by Anern after improving the existing solar floodlights in the market in accordance with customer needs. This series of china solar led flood lights are easy to install and connect, and can be installed on walls and light poles. The installation position of the solar panels can be adjusted according to actual needs, and the solar energy can be fully utilized for power generation.

The Detail Of Anern China Solar Flood Light (SFL02)

The self-developed die-cast aluminum housing of this china commercial solar flood lights series has fast heat dissipation which improves the service life of the entire lamp and distinguishes it from products commonly used in the market.

Using imported LG high-brightness lamp beads, with a customized reflector, the brightness can reach up to 150lm/w.

Aluminum frame high-efficiency solar panels, equipped with extension cords, can install solar panels anywhere.

Built-in super-capacity battery ensures that this series of commercial solar flood lights is on for over 12 hours every night, and it can be backed up for up to 3 rainy days.

The Production of High Powered Solar Flood Lights (SFL02)
The production of another batch of solar flood light has been completed. As a professional solar floodlight manufacturer, Anern controls the product accessories quality and delivery time from the source, without any intermediate links, and reduce the production costs.

Anern Energy Technology Co., Ltd.(Referred to as “Anern”) is a professional led light manufacturer, we provide anern solar light, 300w led solar flood light and etc.

High Efficiency Shingled Solar Modules Mono Perc(2022年01月21日)

anerngroup — 2022-01-13T17:02:25+0900

https://www.anerngroup.com/products/high-efficiency-shingled-solar-modules-mono-perc/

As the solar applications and LED light manufacturer, Anern solar company has an in-depth understanding of customer needs and we apply advanced technology and design into each solution of our lighting products. We have a factory of 30,000 square meters, where we ensure high productivity and high-quality products through strict control of the manufacturing process and quality inspection; We have a professional and experienced R&D team that integrates the latest technology into every product design to provide strong technical support for customers' customized requirements.

High Efficiency Shingled Solar Modules Mono Perc
As one of the solar roof shingle manufacturers, Anern AN-MSP series shingled style solar panel is the hot-selling overlapping monocrystalline solar panel in Anern factory. Compared with the normal module cell technology, the shingle cell solar panel adopts the shingling technology which delivers ultra-high efficiency increasing the performance of the shingled panel in low light conditions, boosting the lifetime power yield of the solar system. Shingled modules cut solar cells into strips and overlap them inside the framed module. Intercell gaps are removed, and more shingled cells can be crammed into one module, increasing power output and module efficiency.

The Details of High Efficiency Shingled Solar Module Mono Perc
By configuring the solar cells in shingles, the shingled PV modules can be wired in groups and configured in parallel which significantly reduces the losses of energy caused by shading.

Adopting seamless soldering technology, the shingled solar cells allow the gap between the solar cells to be eliminated, which greatly increases the number of solar cells per square meter.

Shingle style solar panels have no visible circuitry which give them clean simple look providing superior street appeal.

Shingled cell solar panels do not need to be spaced apart like in conventional solar panels, higher power per square metre, the solar panel area can produce more energy.

The Specification Of High Efficiency Shingled Solar Modules Mono Perc
Item No.PM(w)Maximum Power VoltageMaximum Power CurrentOpen Circuit VoltageShort Circuit CurrentSizeWeightWarranty
AN-MSP-550W550W45.84V12.00A53.63V12.65A2148*1188*35mm28.07kg25years
AN-MSP-500W500W41.18V12.14A49.42V12.82A2148*1020*35mm25.52kg25years
AN-MSP-450W450W36.74V12.25A43.07V12.86A2148*960*35mm22.68kg25years
AN-MSP-400W400W41.26V9.70A48.17V10.23A1730*1080*35mm20.55kg25years
AN-MSP-380W380W39.03V9.74A45.76V10.22A1730*1020*35mm19.41kg25years

The Key Features of High Efficiency Shingled Solar Modules Mono Perc
Advanced Technology：
Solarshingle technology provides ultra-high efficiency and maximizes installation capacity in limited space.

Beautiful Appearance:
Shingled solar modules are evenly arranged, which is very visually pleasing.

Enhanced Weather Resistance:
Avoid the microcrack of cells caused by the traditional welding process; Solar shingle systems are flexible and have compressive resistance, which makes them suitable for all harsh environments.

Reduce System Cost:
High module efficiency reduces floor space effectively, BOS, transportation, and maintenance costs

Strong Compatibility:
The perc shingled cell solar panels can be equipped with a variety of mainstream high efficient (PERC, SHJ) cells.

Anti-LID / PID：
Ensure higher actual yield during lifetime.

Shingled PV Modules Efficiency
The power of the shingled PV modules is increased by more than 10%: the higher the cells efficiency, the more advantages the shingled solar panel can gain. Compared with conventional PV modules, the theoretical power of shingled PV modules can be increased by 15%, and for mass production, the power can generally be increased by 10%-12%. Based on the M2 specification monocrystal PERC cells, the power of a 60-size conventional monolithic module can reach 315W, and after adopting the shingle enclosure technology, the module power can reach 345W (the power of the whole level, the actual power may be higher).

The increase in power of shingled solar cells mainly comes from the increase in the number of cells with reduced packaging and blanks, and secondly from the reduction in current consumption caused by the elimination of solder ribbons and the reduction of cells slices. In addition, due to the elimination of the welding ribbon, the frontal shielding of the shingled module is reduced, and a small amount of power is also increased.

Enlarged LED Module Solar Street Light(SLZ)(2022年01月20日)

anerngroup — 2022-01-13T17:01:57+0900

https://www.anerngroup.com/products/enlarged-led-module-solar-street-light-slz/

Enlarged LED Module Solar Street Light(SLZ)
AN-SLZ series all in one led street light is Annan's latest patented integrated solar street lights released in 2021. This series of solar powered led street lights uses a huge LED module, which increases the quantity of lamp beads for each LED module. Compared to the conventional solar street lights, our enlarged solar powered outdoor street lights can effectively increase the brightness by 10-20%. Mainstream integrated structure design, saving transportation cost. Easy to install and convenient for maintenance. The brackets adopt an integral die-casting method with higher structural strength, which can resist 16-level typhoons and ensure the safe use of these solar powered street lights.

The Details of Enlarged LED Module Solar Street Light(SLZ)
With the die-cast aluminum bracket, high mechanical strength, anti-wind resistance of Level-16 and 3 lighting modes, our enlarged 100w all in one solar street light series is flexible to switch via remote control.

The built-in brand new and big capacity LifePo4 battery can provide exceptional longevity for our all in one solar LED light with great security and stability.

Enlarged capacity LED module design, equiped with high-brightness Bridgelux LED chips, improving the brightness by 30%.

Equipped with mono solar panel with a high photoelectric conversion efficiency of 22% and perform good in high heat and lower light environments.

The Specification of Enlarged LED Module Solar Street Light(SLZ)
ModelSolar PanelLiFePO4 BatteryLumenBeam Angle
AN-SLZ-40W18V65W12.8V28AH210lm/w140*70°
AN-SLZ-50W18V70W12.8V36AH210lm/w140*70°
AN-SLZ-60W18V80W12.8V42AH210lm/w140*70°
AN-SLZ-80W18V100W12.8V57AH210lm/w140*70°
AN-SLZ-100W18V130W12.8V63AH210lm/w140*70°
AN-SLZ-120W18V140W12.8V72AH210lm/w140*70°

The application of Enlarged LED Module Solar Street Light(SLZ)
Designed by Anern, one of the professional solar street lights manufacturers in China, our AN-SLZ engineering wholesale all in one solar street light series are extremely ideal for urban roads and secondary trunk roads, parking lot, square, playground lighting, community road lighting, island lighting, industrial zone, science and technology parks, bridges and municipalities projects, etc.

119 sets of 120W LED Solar Street Lights Installed In Philippines Rural Villages(2022年01月19日)

anerngroup — 2022-01-13T17:01:27+0900

https://www.anerngroup.com/120w-rural-solar-street-light-for-philippines.html

119 sets of 120W LED Solar Street Light Installed In Philippines Rural Villages
Project Name：120W Rural LED Solar Street Light for Philippines

Date：Sep.18th, 2021

Project Type: Rural Solar Street Lighting Project

Project Site: Philippines

Quantity and Specific Configuration: 119PCS all in one solar street lights SLZ series 120W

Description: The customer from the Philippines wants to test our patented solar street lights SLZ-120W in rural area. He thinks highly of Anern's 120w solar street light regarding its design and quality. He considers our LED solar street lamp 120w model as a big quantity bid project.

80W All In One Solar Street Light for Botswana Etsha Village(2022年01月18日)

anerngroup — 2022-01-13T17:00:38+0900

https://www.anerngroup.com/80w-all-in-one-solar-street-light-for-etsha-village.html

80W All In One Solar Street Light for Botswana Etsha Village
Project Name：80W All In One Solar Street Light for Botswana Etsha Village
Date：Aug, 2021
Project Type： Village Lighting Project.
Project Site：Botswana, North-West District in Etsha village
Quantity and specific configuration：75units SLA-80W all in one solar street light with camera (Mono solar panel 140W, Lifepo4 battery 12V 72AH) and 10.5m pole.
Description：Anern SLA 80w all in one solar street light series is very bright with LED efficiency 210lm/w, 10.5m pole with 80w. Its lighting effect is perfect. The village solar street light we installed do not only bring brightness to the village but also create very beautiful scenery in the village. All people are very happy about the solar street light in village.

Saudi Arabia 50 Watt Integrated Solar Street Road Lighting Project(2022年01月17日)

anerngroup — 2022-01-13T17:00:09+0900

https://www.anerngroup.com/saudi-arabia-integrated-solar-street-road-lighting.html

Anern can assist you in customizing solar power systems for a wide range of commercial and home china LED light applications. We provide grid-tied, off-grid, hybrid, and all of the components, including Anern solar panels and Anern solar generators, that are necessary to construct and operate an Anern solar power system.

Saudi Arabia 50 Watt Integrated Solar Street Road Lighting Project
Project Name: Saudi Arabia 50 Watt Integrated Solar Street Road Lighting Project
Date: April, 2018
Project Type: All In One Solar Street Light Road Project
Project Site: Saudi Arabia
Quantity and specific configuration: 225units 50W AN-ISSL-M2 Integrated Solar Street Road Light with 6m pole set
Description:

Anern AN-ISSL-M2 50 watt solar led street light was installed on a 6m wide and 6m high street in Saudi Arabia to supply power to the street without lighting at night. On the street light, there were only some small landscape lamps that emitted a faint light, which made the people living nearby and passersby feel very inconvenient and unsafe. AN-ISSL-M2 series solar street lights are equipped with a motion sensor, 100% brightness lighting when someone passes by and turned into energy saving mode when there is nobody, in order to maximize energy saving.

After this 50 watt solar street light was installed, they solved the lighting problem in the street well. Up to now, these integrated 50-watt solar led street lights have been installed for 4 years and still working well without any replacement. Clients are satisfied with their high quality.

Perfect Solar Parking Lot Light Project in South America(2022年01月16日)

anerngroup — 2022-01-13T16:59:40+0900

https://www.anerngroup.com/perfect-solar-parking-lot-light-project-in-south-america.html

Perfect Solar Parking Lot Lights Project in South America
Project Name: 120W All-in-one Solar Panel Parking Lot Lights Project in South America

Date : May 2021

Project Type: Solar Parking Lot Lighting Project

Project Site: South America

Quantity and specific configuration: 153 sets of 120W AN-SLA all in one solar street light with camera

Description: Anern all in one solar street lights illuminated the parking lot in front of Porsche centre in South America. The person in charge said everyone was impressed by the lighting effect and no need to endure flickers anymore.

This solar LED parking lot lights project is an alternative to traditional solar lights pole for parking lot located in the suburbs of South America. Since the lighting of the parking lot had been used for a long time, the old solar parking lights all have various failures, ranging from not lighting up to even causing a fire. So the purchasing manager find Anern, hoping that Anern can provide a reasonable and high brightness solar parking lot lighting solution. According to the customer's requirements, Anern provided him with our 120W outdoor solar lights for parking lots with a customized intelligent control system. Our AN-SLA series integrates an adjustable structure of LED modules. It means our LED modules can be adjusted at different angles according to different solar parking lot lighting requirements, which greatly improves the applicability of the solar powered parking lot lights. At the same time, these commercial solar powered parking lot lights also hold built-in BMS (Battery Management System) to protect the battery from over-charge and over-discharge, safe and stable operation to meet the lighting needs of parking lots and prolong the lifespan of the solar lights.

Rural Road 60W Integrated Solar Street Light Project in Trinidad(2022年01月15日)

anerngroup — 2022-01-13T16:58:41+0900

https://www.anerngroup.com/rural-road-integrated-solar-street-light-project.html

Rural Road 60W Integrated Solar Street Light Project in Trinidad
Project Name: Rural Road Integrated Solar Street Light Project in Trinidad

Date: December 2020

Project Type: Rural Road Lighting Project

Project Site: Trinidad

Quantity and Specific Configuration: 120 sets of all in one solar street light with camera with the 6-meter pole

Description: 120 sets of Anern 60w LED solar street light was successfully installed in the country of Trinidad on Dec 20th, 2020. Because of the customer's high requirement for lighting, we recommend integrated 60 watt solar light with 6-meter poles. This series of 60w solar outdoor light can be lit for more than 12hours per day, and have a backup of at least 4 rainy days. The customer is quite satisfied with our 60w integrated solar street light and the local people like the high brightness and high quality of our solar street lights, especially in the evening.

LED Solar Powered Street Light Solution for Philippine Community(2022年01月14日)

anerngroup — 2022-01-13T16:58:11+0900

https://www.anerngroup.com/led-solar-powered-street-light-solution.html

LED Solar Powered Street Light Solution for Philippine Community
Project Name: LED Solar Powered Street Light Solution for Philippine Community

Date: Jan. 2021
Project Type: Community Solar Street Light Project
Project Site: Philippines
Quantity and Specific Configuration: 100 sets of AN-ISSL-M2 series 100w all in one solar street light with 8-meter poles
Description: AN-ISSL-M2 series of 100w solar street lights were used in a community road by one of our customers in the Philippines. Considering of good sunshine and windy sometimes in the Philippines, the customer prefers cost-efficient 100 watt solar street light and 100 watt LED solar street light. Our patented module M2 series with 8-meter poles is recommended. The community is quite pleased with the results and we look forward to working with them on future solar lighting projects.

150W Double-sided Mono Solar Panel Solar Street Light Project in Malaysia(2022年01月13日)

anerngroup — 2022-01-13T16:57:40+0900

https://www.anerngroup.com/150w-solar-street-light-project-in-malaysia.html

150W Double-sided Mono Solar Panel Solar Street Light Project in Malaysia
Project Name: 150W Automatic Double-sided Mono Solar Panel Solar Street Light Project in Malaysia

Date: March 2021

Project Type: Government Solar Lighting Project

Project Site: Shah Alam, Malayasia

Quantity and specific configuration: AN-SL-X 150W with 12-meter poles

Description: This is an solar panel street light project in Malaysia. Due to the customer has requirements for the lighting brightness of the automatic street light using solar panel and the storage time of rainy days, Anern provided 12 meters high light poles and equipped with our self-developed high-quality product 150W AN-SL-X integrated street light with solar panel. AN-SL-X solar street light with panel and battery series uses double-side mono solar panels, which have higher power generation and efficiency. And based on the customer's brightness requirements, we helped them determine the position and orientation of the solar light poles. All procedures were completed in strict accordance with the time schedule, and the project service and product quality are highly recognized by the Malaysian project team.