HANGZHOU CANDID I/E CO.,LTD.

The Process of Crayon-making(2021年06月14日)

candidstationery — 2021-06-09T18:56:56+0900

http://www.stationerymachine.com/eraser-making-machine/

That dozens of colors may it be, a crayon is a drawing pen made by mixing paint into wax.

Unable to penetrate, crayons dye onto the picture by adhesion force. Therefore, they are suitable neither for smooth card boards, nor for a fusion color arising from overlapping colors repeatedly. It is an ideal tool for children to learn pastel, as well as for some painters to sketch and paint.

Today let's unveil the process of making crayons.

The main raw materials for making crayons are paraffin wax, mineral wax, special polymer pigments, other filling materials and so on. Mix them all, feed them into the machine and wait for them to be a solid cream. Holes in the bottom of the machine are responsible for shaping the crayons. Once their stabilized shape is formed, crayons are taken out to be rolled with a layer of paper on their surface. Then they are sorted by their colors into different devices, from which drop out a single crayon each time. Finally, pack the crayons as what we see on everyday market.

Two ways of crayon-making are casting and extrusion, for which the ratio in general is 40% C16 ~ C18 fatty acid, 40% wax, 5% various pigments and 15% other fillers. To mention it, for extrusion, the ratio of other fillers can be higher. The demand of wax differs from the diversified surfaces of writing materials such as glass, metal, wood, fabric or other artistic required ones. A new breed enabled by a water-dispersal ingredient added in, the writing crayon can penetrate and diffuse as it meets water.

HANGZHOU CANDID I / E Co. , Ltd is a professional R & D, production and export enterprise specialized in stationery manufacturing machines. For more information about excellent crayon manufacturing machines, please refer to website.http://www.stationerymachine.com/.

HANGZHOU CANDID I/E CO., LTD is one of professional stationery machine manufacturers. We provide Clip Making Machine, Pin Making Machine, rubber band production machine, stapler pin manufacturing machine, eraser manufacturing machine and so on. Want to know more? Please contact us.

The History Of Automatic Stationery Production(2021年06月13日)

candidstationery — 2021-06-09T18:56:26+0900

http://www.stationerymachine.com/eraser-making-machine/

1. The necessity of automatic production
For a long time, a company in the industry felt a sense of crisis from the stationery box stamping workshop. The traditional production process of the tinplate stationery box requires workers to go through a series of processes, such as pulling, removing the waste edge, shaping, curling, punching, etc. to complete a stationery box, it requires 8 punches and 8 workers, Not only is the noise in the workshop more severe, but also the operator's risk coefficient is high leading to cause occupational accidents easily. It takes two years to train a skilled worker, but many of these new workers recruited every year would work for less than a month and decide to quit. The age range of workshop workers is from 40 to 50 years old, which may generate a lack of experts, and affect the production capacity greatly.

In addition, we have also found a common phenomenon. The quota that was easily completed five years ago is almost impossible for workers to complete now. In front of us is the urgent problem of how to reduce labor force and improve production efficiency.
2. Automated equipment development
Ten years ago, the company envisioned how to carry out automation reform that is to replace traditional processes with automation and to decrease reduction production capacity due to workers' reasons to improve marketing competition.

The chairman and general manager of the company visited many mechanical equipment exhibitions and visited many equipment factories for on-the-spot investigation and communication. It took several years to overcome all kinds of difficulties through joint efforts with the equipment factory. In 2010, the first fully automatic iron box stamping line was finally trial produced. The drawing, shaping, crimping and punching of iron box were formed at one time. However, in massive practical production, there were still various problems, such as scratch of printing surface, inadequate crimping, etc. Through more than half a year of continuous debugging and production, the practical problems were finally solved. At present, HTC has 4 iron box stamping lines.
3. Some experience of automatic production
Through the introduction of four full-automatic iron box stamping lines, the number of workers in the stamping workshop has been reduced from more than 50 in the past to less than 20 at present, reducing the labor intensity of workers, reducing the risk of industrial injury, and the daily average production. And it has increased compared with the traditional process. We are no longer worried about the lack of stamping operators.

The company has successively purchased 6 sets of automatic screen printing machines with plastic ruler, which has solved the problem of not recruiting printing workers and greatly improved the product quality.

But it is not smooth sailing in the process of automatic production. It mainly focuses on the following points:
1. The cost of development is high and will take a long time.
2. The run-in period of automatic equipment will take a period of time, and it is difficult to achieve the expected goal at the beginning.
3. Due to the long time spent on replacing and debugging the mold, it is only suitable for the production of large batch of varieties, not suitable for small batch of varieties.
4. The requirements for raw materials are relatively high, and the poor quality of materials will directly affect the continuity and efficiency of automatic production.
5. Costs of later maintenance are relatively high, and the requirements for operators and technicians are also relatively high.

HANGZHOU CANDID I/E CO.,LTD. is a professional enterprises specializing in manufacturing stationery machine, and deal with business of production and export, integrating "production, sales and service". The company has been committed to research and development of professional stationery production line. Leading products: eraser-producing machine, paper clip machine, crayon machine, stapler machine, etc. Please contact us via zmec@china-equipment.com.

Website:http://www.stationerymachine.com/.

HANGZHOU CANDID I/E CO., LTD is one of professional stationery machine manufacturers. We provide Clip Making Machine, Pin Making Machine, play dough making machine, sewing needle manufacturing machine, eraser machine and so on. Want to know more? Please contact us.

This Is How A Measuring Tape Is Made!(2021年06月12日)

candidstationery — 2021-06-09T18:55:57+0900

https://www.stationerymachine.com/measuring-tape-making-machine/

Tape measure is a kind of measuring tool commonly used in daily life. Steel measuring tape, which is often used in construction and decoration, is familiar for the majority and also one of the necessary tools for families. It can be divided into three types, fiber tape, leathery tape, body tape, etc. Lu Ban ruler, Feng Shui ruler and Wen Gong ruler also belong to steel measuring tape. What we often see is the steel measuring tape, which is composed of eight parts: shell, ruler bar, brake, ruler hook, lifting strap, ruler spring, protective cover against falls and label.

1. Shell: ABS new-style plastic, glossy texture; protectively robust, wear-resistant, hardly to be distorted.
2. Ruler bar: 50 × grade I strip with thickness of 10 wires (0.10 mm) is used; ruler surface is coated by the most advanced environmental oil paint: odorless, smooth, wear-resistant, bright hued, clearly printed.
3. Braking: braking is from upper, side and bottom with stronger sense of control by hand.
4. Ruler hook: structure of rivet ruler hook, less distortion, to ensure more accurate measurement.
5. Strap: two kinds of rubber and nylon; high-grade and high-quality; strong and durable, touching good.
6. Ruler spring: 50 × carbon steel and 65 × manganese material；strong toughness and high accuracy.
7. Protection cover against falls: high-quality plastic, to prevent falling and collision damage, and to enhance durability.
8. Labeling: Produce label according to customer requirements.

The numbers on the tape measure are divided into two rows. One row applies the unit of centimeter/cm, each of which equals to about 0.3937 inch, and one inch is about 2.54cm. Therefore, one row with shorter intervals between two numbers uses cm, the other with longer uses inch, and the number font of cm is smaller than that of inch. 100cm equals to 1m. Generally, the unit in use is cm.

HANGZHOU CANDID I/E CO., LTD is a professional enterprises specializing in manufacturing stationery machines, and deal with business of production and export. We are a professional manufacturer of Measuring tape manufacturing machine. Please consulthttp://www.stationerymachine.com/.

HANGZHOU CANDID I/E CO., LTD is one of professional stationery machine manufacturers. We provide Clip Making Machine, Pin Making Machine and so on. Want to know about paper clip manufacturing process? Please contact us.

When Was the Paper Clip Invented?(2021年06月11日)

candidstationery — 2021-06-09T18:55:27+0900

https://www.stationerymachine.com/

People used to pin their papers together, of which the needle hurts the paper and the user. A Norwegian inventor named John Waller thought the problem can be solved by a wire paper clip, for which he got a patent in 1901. At almost the same time, several inventors came up with several similar designs.
However, all these solutions had some problems. First, the end of the wire stuck into the paper when it was pushed, causing more damage to the paper than that with the needle. Then, difficulties arose in developing a machine producing clips, as well as the hand-made clips to be much more expensive.
William Middlebrook, an engineer at Wartburg, Connecticut, solved the problem of machine building. In 1899, he invented a machine for bending wire-paper clips and might offer solutions to other problems. The paper clip made by his machine has a doubled ring, very much like the one we use now. Among them, was the famous "Gem" paper clips, which might not damage the paper. Made of plastic, attractive paper clips now are coated with different colors, by which the user can "code" the page. No one seemed to mention the patent for the "Gem" paper clip before, so its inventor remains unknown. However, since it was adopted in the early of this century, it has become the standard design.
What can the paper clip do? I bet that many of you would like to know. Bent several times, a thin steel wire within an inch turns out to be a paper clip. Besides holding paper, what can it do?
In the office, as a fixer, the most common use of paper clips is to attach files and paper together. My neighbor put paper clips together and wrapped them in colorful paper to form a curtain. It was beautiful! It can also be twisted into a variety of small artworks. I have seen them made into the shape of a bicycle. Creative! Think out of the box to discover the veiled use. Enrich its use as much as we can, then the answer comes up in all kinds.
In the training of "creativity" exists a famous training case: How many uses are there for paper clips? I bet that everyone’s instant answer is folders, then it is surely followed by chains, toothpicks, bindings, forks, stings, keys, hooks, buttons, needles, curtains, .... According to a Japanese scientist, there are 2,400 uses for paper clips listed. Even a scholar in Nanjing claims that he can list 30,000. How useful the little paper clip is!
Hangzhou CANDID I / E Co. , Ltd is a professional R & D, production and export enterprise specialized in stationery manufacturing machines. For more information about excellent paperclip manufacturing machines, please refer to website.http://www.stationerymachine.com/.

HANGZHOU CANDID I/E CO., LTD is one of professional stationery machine manufacturers. We provide Clip Making Machine, Pin Making Machine, stationery making machine and so on. Want to know more? Please contact us.

The Production Process of Erasers(2021年06月10日)

candidstationery — 2021-06-09T18:54:57+0900

https://www.stationerymachine.com/eraser-making-machine/

1. The petroleum refineries transport powder or liquid synthetic rubber to eraser factories. If the natural rubber is needed, a whole solid piece of rubber will be provided, so the workers must shatter and dissolve it first.

2. Mix the rubber with ground pumice powder (which can make the rubber slightly rougher), iron oxide (which can make the rubber pink), vegetable oil, sulfur, and other substances.

3. Mix the sulfur with the rubber by heating the mixture to increase the strength of the rubber and make it more durable.

4. Put the soft, hot ingredients into an eraser extruding machine (squeeze them into a die) to make slender rubber sticks, then cut the rubber sticks into small pieces with a knife and transport them to a pencil factory after cooling to make erasers on the top of pencils. The eraser extruding machine plays an important role in the three stages of extruding an eraser into shape: raw material plasticization, molding and cooling. Eraser extruding machines are also divided into several different types. Eraser extruding machines with screws are divided into single screw extruding machines, twin-screw extruding machines, multi-screw extruding machines, etc.; Extruding machines can also be divided into continuous and discontinuous extruding machines. The output of the extruding machine is determined by the screw speed. The screw speed can not only affect the output of erasers but also the effect of plasticization.

5. Block erasers for alone use are made by injecting a heated rubber mixture into molds of various shapes. Open the molds after cooling and the erasers of various shapes are successfully made.

HANGZHOU CANDID I/E CO., LTD is one of professional stationery machine manufacturers. We provide Clip Making Machine, Pin Making Machine, stationery manufacturing machines and so on. Want to know more? Please contact us.

The performance of Eraser Packing Machine(2021年06月09日)

candidstationery — 2021-06-09T18:53:52+0900

https://www.stationerymachine.com/eraser-machine.html

Eraser packaging machine is used for making rubber and PVC erasers commonly consumed in schools and offices. There are monochrome, multi - color, heat transfer printing, carton and other kinds of eraser packaging, and they can be customized according to customers' requirements.

The eraser packaging machine is mainly controlled by PLC. With the turret forming structure, the packing machine completes the trademark paper packaging for erasers through a series of working procedures such as transmission, gluing, folding, forming, shaping, etc.

11 performance features
1. Controlled by the dual-converter, it saves time and films because the bag length can be flexibly cut and there is no need to adjust the idling, so all procedures are settled in one go.

2. The key parts of the machine adopt stainless steel structure, which is in line with food QS and medical GMP hygiene requirements.

3. High sensitivity electric eye automatic tracking system is adopted, so no manual adjustment is required after setting. The position of sealing and cutting is accurate, and the seal is firm and beautiful.

4. Controlled by temperature independent PID intelligent system, the temperature stays stable, which is better suitable for all kinds of packaging materials.

5. The fault display is clear with the fault self-diagnosis function.

6. With the production automatic counting function, it realizes quantitative production so the packaging output is shown accurately and clearly.

7. The transmission system is simple, the work is more reliable, and the maintenance is more convenient.

8. Adopt the position parameterized setting for packaging materials, so there is no need to manually and mechanically adjust the position of packaging materials.

9. Eraser packing machine can store several sets of parameter settings of packaging products. When changing the packaging products, the normal production can be switched directly without re-adjusting the machinery, so it saves time and films in replacing the packaging products.

10. The intelligent and humanized parameter design, which can be skillfully used by ordinary people in a short time, reduces the professional skill requirements for operators.

11. The eraser packaging machine can be configured with single servo, double servo or full servo according to users' demands.

Rubber Band Cutting Machine Features(2021年04月22日)

candidstationery — 2021-04-22T12:16:58+0900

https://www.stationerymachine.com/rubber-band-making-machine/

Rubber band cutting machine is suitable for sized cutting of rubber bands, silicone rubber bands, sealing strips, shock absorption strips, heat-shrinkable tubes, cable ties, silicone tubes, electrolytic capacitor PVC sheathings, PVC plastic bands, flat cables, plastic hoses, insulating paper, copper foils, copper sheets, double faced adhesive tapes, cotton tapes, zippers, leathers, paper, conductive fabrics/foams, acetate clothes, PET, non-woven fabrics, insulating paper, hook and loop fasteners, EVA, rubber mats, woven tapes, fastening tapes, sticking tapes, safety belts, color tapes, plastic sponges, copper/aluminum foils, all kinds of adhesive tapes, flexible circuit boards, etc. It can also be used to cut all kinds of sheathings, fiberglass tubes, wires, shielded wires, tie wires, PE film bags, ribbon or hose tubes, etc.

Features of rubber band cutting machine

High speed material transmission; the computer pipe cutter is controlled by a microcomputer program

Adjustable cutting speed; Chinese LCD display

The band length and the cutting speed are continuously and discretionarily adjustable

Automatic group accumulations and total accumulations

Batch pause and settable delay time

Stop automatically for lack of materials, so no one needs to be on duty

Automatically cut all kinds of tube and ribbon materials;

High-speed stepping motor accurately controls the length of pipe cutting;The belt length and cutting speed can be adjusted;

Time protection for cut-off kinves; total amount setting; respective setting for different cut-off knives;the pause time of every knife can be adjusted;

Equipped with various of manual operations, which are convenient for debugging;

The LCD screen of the computer pipe cutting machine visually displays Chinese, so the operation is simple and convenient;

Adopting special mechanical structure and being equipped with special software control, CANDID rubber band cutting machine solves the uneven incision problem in cutting rubber and silicon tubes, which frequently occurs in many other factories.

If interested, please feel free to contact us.

HANGZHOU CANDID I/E CO., LTD is a professional stationery machine manufacturers, we provide stationery manufacturing machines, stationery making machine, stationery machine and etc. Want to know paper clip manufacturing process or more? Please contact us.

Features of Stationery Making Machine(2021年04月22日)

candidstationery — 2021-04-22T12:16:30+0900

https://www.stationerymachine.com/

Stationery manufacture refers to the manufacture of all kinds of stationery used in offices and for study.

Functions and structural features of stationery manufacturing machine
1. Controlled by the dual-converter, it saves time and films because the bag length can be flexibly cut and all procedures are settled in one go.

2. The interface functions are simple and quick to set up and operate.

3. The fault display is clear with the fault self-diagnosis function.

4. The stationery manufacturing machine achieves ultra-high precision with the high sensitivity photoelectric eye color tracking system and by inputting specific data of the cutting and sealing positions.

5. Temperature independent PID control is more suitable for manufacturing different materials.

6. No sticky knives or wasted film with the position stop function.

7. The simple drive system helps to realize reliable operation and easy maintenance.

8. All controls are software-based, which makes it easy to adjust functions and upgrade technology.

CANDID, one of the leading stationery making machine manufacturers in China, our machinery equipments especially stationery making machines are sold all over the world. Continuing our commitment to innovative product design, functionality and overall usability, all of our products are widely used in the packaging manufacturing industry, and we are committed to achieving the best quality requirements for all types of our products. Our products are absolutely your best choice. We sincerely hope to have the opportunity to establish further business relations with you.

Our company has been committed to the research and development of intelligent equipment and manufacturing for many years. We have a well-organized, professional and excellent team. We deeply believe that in the near future, CANDID will contribute simpler and more intelligent production equipment to the market.

The Application of Plasticine Machine in the Market(2021年04月22日)

candidstationery — 2021-04-22T12:14:54+0900

https://www.stationerymachine.com/plasticine-machine/

Plasticine, which is also called colored clay, is a kind of raw material used by students to make creative modelings and colored clay paintings. Plasticine is best for creative works because it is soft but not sticky and has various colors like red, yellow, blue, green, pink, orange, purple and so on. When the plasticine gets dry, add some water then it will return to softness, so it can be reused for many times. Plasticine paintings form a new consumption hot spot in the colored clay market because of its simple production, wide range of adaptation, rapid spread, and strong repeated consumption. People in the modern society require a higher and higher living standard, and their consumption concepts have changed dramatically. Either from eating to playing or from appreciation to participation, the youth generation has become a large group of colored clay consumers due to their knowledge-seeking, novelty-seeking and avant-garde lifestyles. Plasticine paintings are especially popular because they have all sorts of characteristic patterns that attract modern urban teenagers. Spending 10 to 20 yuan making a lovely plasticine painting in person, hanging it in the room or sending it to friends and lovers as a present fully reflects the fashion-conscious personality of the modern urban youth.

In order to meet the needs of the market, our company has developed and produced a full-automatic speed-regulating plasticine machine. The full-automatic plasticine machine can be divided into two types: single color stripper and double color stripper. Users can adjust the color of the colored clay according to the number of machines needed in production. The machine controls the discharging speed through the speed regulating motor, and changes the die head to adjust the degree of thickness. After the colored clay strips are transmitted to the delay segmenting machine by the band carrier and are cut into pieces, the workers can start the packing, which saves the labor and raises the output. You are welcome to shop!

How a rubber eraser making machine makes a rubber eraser(2021年04月22日)

candidstationery — 2021-04-22T12:14:21+0900

https://www.stationerymachine.com/eraser-making-machine/
1. The petroleum refineries transport powder or liquid synthetic rubber to eraser factories. If the natural rubber is needed, there will come a whole solid piece of rubber, so the workers must shatter and dissolve it first.

2. Mix the rubber with ground pumice powder (which can make the rubber slightly rougher), iron oxide (which can make the rubber pink), vegetable oil, sulfur, and other substances.

3. Mix the sulfur with the rubber by heating the mixture to increase the strength of the rubber and make it more durable.

5. Block erasers for alone use are made by injecting a heated rubber mixture into molds of various shapes. Open the molds after cooling and the erasers of various shapes are successfully made. That's the whole process of a rubber eraser making machine makes a rubber eraser.

All above is the production process of the rubber eraser making machine.

The Background Information of Stapler Machines(2021年04月22日)

candidstationery — 2021-04-22T12:13:33+0900

https://www.stationerymachine.com/staple-making-machine/

The stapler machine is one of the most common gadgets for work and life. In fact, the earliest stapler machine was not an article for office use but for the printing industry. In the past it was a big machine which is not as small as it is now.

The traditional way of binding books is to stitch the pages by hand according to the "page code". It is a fairly complex process which is simple for a skilled bookbinder but quite difficult for a machine to do such fine work. However, how to improve work efficiency because the speed of manual binding is too slow? People try to find a way to bind books with short pieces of bent iron wires.

In 1869, Thomas Briggs who was from Boston, Massachusetts of the United States invented a machine that could handle the job. The machine firstly broke the iron wire and bent it into U-shape , then the iron wire was used to staple through the pages, and finally fixed the book in proper place with a bend. At the same time, he founded Boston Iron Wire Binding Machine Company, which manufactured and sold such machines.

The original stapler machine invented by Briggs was complicated because it had so many steps and was too big. In 1894, he developed a new manufacturing process. The process began by breaking and bending the iron wires to make a series of U-shaped staples, which can fit into a much simpler and smaller machine, then the machine could insert them into the paper. This machine was the prototype of modern stapler machines.

The early U-shaped staples were either wrapped in paper or packed individually into a stapler machine. In the 1920s, with the more common use of stapler machines, U-shaped staples were already glued together into long strips as we see nowadays. The staples used today are usually made of iron wires coated with nickel or nickel zinc alloy for rust protection.

The Advantages of Stationery Machine Manufacturers(2021年04月22日)

candidstationery — 2021-04-22T12:12:27+0900

https://www.stationerymachine.com/
The traditional Chinese stationery refers to the Four Treasures of the Study: writing brushes, ink sticks, paper and inkstones. With the development of social economy and the progress of science and technology, our cultural life becomes increasingly colorful, and the concept of stationery is constantly updated and expanded. At present, the modern stationery usually refers to all kinds of tools relating to office and learning activities, which can be generally divided into writing tools, student stationery, office stationery, teaching tools and other cultural and educational office supplies. The categories are extremely rich and there are a variety of stationery products under different subdivision categories.

The stationery manufacturing industry is the midstream of the relevant industrial chain, and there are upstream raw material suppliers and downstream sales channels. As the upstream raw materials vary widely in different industries, here we take writing tools as an example to illustrate the relevant stationery manufacturing industry chain.The upstream raw materials of writing tools mainly include pen tips, ink and plastic pellets, while the downstream distributors are various channels.

With the continuous development and expansion of the domestic stationery market, the stationery machine manufacturers are on the rise. The stationery industry has shown several distinct characteristics in the development process:

(1) huge market potential and continuous enhancement of consumer purchasing ability;

(2) the diversified and multi-level consumption structure of stationery has been formed, and it is developing towards higher-grade levels;

(3)the stationery industry has become an important part of the creative culture industry.

How Was The Paper Clip Invented(2020年)

candidstationery — 2020-07-08T11:24:15+0900

http://www.stationerymachine.com/how-was-the-paper-clip-invented.html

In the past, people used to pin their pages together. But the needle damages the paper, and it will also hurt the user by puncturing the finger. A Norwegian inventor, John Waller, thinks he can solve the problem. In 1901, he filed a patent application for the wire paper clip making machine. Almost at the same time, several inventors came up with similar designs.

However, all of these early paper clips had some problems. When pushing the clip, the end of the protruding wire will stab into the paper and break the paper, causing more damage to the paper than the needle. It's also difficult to make a machine for making clips. Obviously, the labor cost of producing paper clips by hand will make the product price too high.

William Middlebrook, an engineer in waterburg, Conn., solved the problem of machine building. In 1899, he invented a machine for bending wire paper clips. Middlebrook could also provided solutions to other problems. The paper clip made by his machine had a double ring, so it was very similar to the paper clip we use now. These paper clips were famous for their paper clips named "gem" . They generally did not damage the paper. Paper clips are now made of plastic coated with different colors. This not only makes paper clips more attractive, but also allows users to "code" pages with paper clips of different colors. No one seems to have mentioned the patent of the gem paperclip, so it's impossible to determine who invented it. But since it was adopted at the beginning of this century, it has become a standard design.

What's the function of the paper clips we often use in our office? Many people want to know about this question. An inch long thin steel wire is bent several times and becomes a paper clip. Besides paper clip, what other uses does paper clip have?

In office, the most common use of paper clip is to clip files, put paper and folders together, and play a fixed role. When I was a child, I saw my neighbor put on paper clips and wrapped them in colorful paper as curtains. It was very beautiful! This thing can also be twisted into a variety of small works of art after being broken off. I've seen it made into the shape of a bicycle. It's very powerful. Open your fixed thinking and use your imagination to know how rich it is. Let's try to think about it. The answers are all sorts of.

In the training of "creativity", there is a famous training case: how many uses does the paper clip have? I believe that everyone's first reaction is to be able to say the file clip, and then after a little thought, they will say more uses, such as chain, toothpick, bounding to things, forking food, stabbing people, unlocking instead of the key functions, going fishing by grinding it into a fishhook; when the button is off, it can be hooked up with a paper clip; when ground, it can replace the needle; it can be made into a curtain, tattoo, hair clip, flower fixing and so on.A Japanese scientist claimed to have listed 2400 uses for paper clips. A scholar in Nanjing claimed that he could list 30000 species. A small paper clip has so many uses.

Hangzhou Kaicheng I / E Co., Ltd. is a professional stationery manufacturing machine R & D, production and export enterprises. Specializing in the production of paper clip manufacturing machine, if you want to know paper clip machine price ,please refer tohttp://www.stationerymachine.com/.

CANDID Company Profile
HANGZHOU CANDID I/E CO., LTD，located in Rm703,NO346 Qingtai street is a professional company specialize in stationary machine designing, manufacturing and export. Founded in 2004, our machines have been exported to more than 30 countries. Main market including: Asia, Africa, America, East Europe.

Who Invented The Paper Clip(2020年)

candidstationery — 2020-07-08T11:23:46+0900

http://www.stationerymachine.com/who-invented-the-paper-clip.html

Paper clip making machine, invented by Norwegian Johan vaaler, was patented in Germany in 1899 for the purpose of holding many pages together.

When we use the paper clips, we will feel that they exist like chopsticks, and few people will focus on such fantastic works. Imagine that before the paper clips came out, the solution people could think of in the face of a pile of paper was nothing more than sticking and sewing, using a piece of wire to deal with this problem in a state of seemingly no connecting. Everything seems to be the alien thinking way.

Improved by William Middlebrook, an engineer in waterburg, Conn., the inner ring of the paper clip looks like the lips are slightly raised, which is the essence of its shape, because the protruding end of the wire in the earlier design will stab the paper and break it. In this way, the pictographic advantage of Chinese characters will be exalted. It seems that the paper clip in English can't make people think "back to shape" in any way.

A plane curve forms a space curve under the action of external forces, and the resulting tension is used to hold a certain thickness of sheet objects. Isn't the exact definition of paper clips? It is said that knots are the first step for humans to bid farewell to the animals. It is only tens of millions of years later that humans have mastered the wonderful use of rigid knots. This can show how the invention of paper clips has epoch-making significance. No wonder that Norwegians wore paper clips on their clothes to show their patriotic spirit in World War II.

In the field of human, the most difficult to design is the paperclip, which looks ordinary but can't be imagined. It will be more intense if it is carefully studied the swallowtail clips which have the similar functions of the paperclip. Unfortunately, it is less possible to know the history of inventing the swallowtail clips, so that I can only regard the abstract human as the object of lamentation. Thank you for the human civilization There are miracles I marvel at.

HANGZHOU CANDID I/E CO.,LTD. is a professional enterprises specializing in manufacturing stationery machines, and deal with business of production and export. It specializes in the production of paper clip manufacturing machine,if you want to know price of paper clip making machine, please click http://www.stationerymachine.com/.

Urban model created by Peter Root using staples(2020年)

candidstationery — 2020-07-08T11:23:18+0900

http://www.stationerymachine.com/urban-model-created-by-peter-root-using-staples.html

I'm sure you've seen a lot of "stacked" art installations. Do you know which one is the most impressive? These dense stacking arts often make people with intensive phobia feel numb, but for ordinary people, they should be able to realize that artists want to express the concept that "more is beauty". However, the works to be introduced to you today may not be so friendly. Even if those people without intensive phobia come to see them, they may also Make your toes curl. It's very because this article plays the role of "puncture" in general, which is easy to associate people with terror!

City model made with staples-2.jpg

The "Ephemicropolis" however created by artist Peter root is composed of staples commonly used by people. This small metal thing has become the material of skyscrapers in the eyes of artists. Root uses more than 100000 staples, and it takes more than 40 hours to arrange out buildings with uneven height. No matter from a distance or from a close distance, it has a special aesthetic feeling.

City model made with staples-3.jpg

It's called "stacking", but actually it's a bit of sneaking. After all, the staples are fixed by glue when produced, so the users can install them into the stapler smoothly. In the process of creation, one of Root’s tasks is to separate them one by one, so as to show the difference of building height. But in fact, the staples glued didn't make the creation simpler. The artist still had to arrange them completely according to the composition in his mind, just like a domino, to test his endurance, concentration and stability. At the same time, he had to be careful not to press these staples with a little lethality. If he didn't pay attention, he would get injured.

/uploads/image/2020/02/16/51150c0d8f4ae8fb5f2751e7c017c143.jpg

/uploads/image/2020/02/16/8eb7a20e9d20b58fd03dadbab3edb2b4.jpg

HANGZHOU CANDID I/E CO.,LTD. is a professional enterprises specializing in manufacturing stationery machines, and deal with business of production and export. As the staple making machine manufacturers, we specialize in the production of stapler pin machine. Please contact us viahttp://www.stationerymachine.com/.

How To Identify The Quality Of Staples?(2020年)

candidstationery — 2020-07-08T11:22:48+0900

http://www.stationerymachine.com/how-to-identify-the-quality-of-staples.html

Stapler pin machine are common office products and the use of staples is also very important. Now there are many kinds of staples on the market. Is the quality of staples good or bad? Different materials and processes will affect the quality. How can we distinguish good quality products? Now, there are three ways introduced here to identify.

1. Look at the brand of staples and packaging.
Generally speaking, the quality and reputation of staples produced by large companies are relatively reliable. The production materials and machines of staples of large companies must be selected layer by layer. CANDID specializes in the development and production of the stapler manufacturing machine, which is very suitable for large companies to produce high-quality staples.

2. Look at the degree of gloss and materials used.
Now the more popular staples are made of steel wire, which is different from the previous wire. The quality of steel wire is more solid and robust, and it is not easy to break and deform. And the stitches made of steel wire and iron wire have obvious differences in appearance color. The stitches made of steel wire have bright color and obvious reflective effect. The color of the staples made of wire is not bright or reflective, which can be easily distinguished by the naked eye.

3. Have a look at the service condition and service life.
However, some of them with brightly sharp stitches found it difficult to get through the paper when used, and also these stitches are easy to be snapped in two. Then you have to pay attention that you are likely to buy gold-plated fake products. The real steel wire stapler has strong penetration, so it is easy to sew paper articles through, and will not be easily snapped off. Higher quality steel also has the good ability of anti-corrosion and anti-oxidation, and the staples after binding will not rust for a long time.

Is the quality of staples good or bad? We believe that all of you have already known how to identify them accurately.

HANGZHOU CANDID I/E CO., LTD. is a professional enterprises specializing in manufacturing stationery machines, and deal with business of production and export. High quality materials with high-quality production machines, will let you produce high-quality products. For more information,if you want to kno the staple pin making machine price, please clickhttp://www.stationerymachine.com/.

The Process of Eraser-making(2020年)

candidstationery — 2020-07-08T11:22:19+0900

http://www.stationerymachine.com/the-process-of-eraser-making.html

Today, let's talk about different types of eraser.

Soft and opaque as they are, erasers of brown, pink or black for 2B or 4B are drawing ones, basically made of rubber. The softest one in the eraser family, the plasticine eraser (a soft eraser) that is soft enough to be reshaped is commonly used in sketching but ill-suited in daily writing.

The plastic erasers which attract the most students are also well distinguished themselves by polypropylene contained. Being semi-translucent with an obvious plastic texture, the plastic erasers will be consumed into small sections or granular scraps, unlike that of other erasers into stripes.

Certainly not, one by one, will I name all other erasers on the market, among which the majority is the specialized ones.

To unveil the process of eraser-making, eraser packing machine / Eraser Wrapping Machine / Eraser Extruder should be introduced. What is the exact process?

The Process of Eraser-making
1. Synthetic rubber in the form of powder or liquid is delivered by a petroleum processing plant to an eraser factory. Whereas natural rubber being a solid mass, must be smashed and dissolved manually at first.
2. Mix the rubber with ground pumice (which makes the rubber relatively hard) , iron oxide (which turns the rubber pink), vegetable oil, sulfur, and other materials.
3. Heat the mixture so that the sulfur and the rubber can roll into each other to increase its strength and durability.
4. Feed the soft, warm material into the punching machine (pressed into a die) to make a rubber stick long and thin. Then the rubber stick should be cut into small segments after coolling down and transported to a pencil factory to be made into a pencil eraser.
5. Block erasers, independently used, are made by injecting a heated rubber mixture into molds of various shapes. Open the mold after cooling down, come out the erasers in all shapes.

HANGZHOU CANDID I/E CO., LTD is a professional R & D, production and export enterprise specialized in stationery manufacturing machines, being a comprehensive entity of "production, sales and services". Dominant products: eraser manufacturing machines, paper clip making machine, crayon manufacturing machines, stapler manufacturing machines, etc. Email: zmec@china-equipments. com.

Websites:http://www.stationerymachine.com/ .

How to Make Erasers(2020年)

candidstationery — 2020-07-08T11:21:47+0900

http://www.stationerymachine.com/how-to-make-erasers.html

Who invented the eraser?
Long before 240 years ago, a British scientist named Joseph Priestley discovered something that could easily erase pencil marks -- rubber. The British called it "rubber" for the first words erased were "to rub out", while the American named it "eraser".

At the same year, Edward Moises Nam, a British engineer, accidentally used a rubber to remove pencil marks and found it effective. Immediately brought into production and sold, the rubber, at that time, credited him with the title of inventor for his business acumen.

Although the discovery of rubber improved the pencil marks removal, the natural rubber made erasers were of the limited convenience, only to dirty themselves in use by sticking pencil dust and being unable to be consumed.

Seventy years later, in 1839, erasers began to be widely used after inventor Charles Goodyear improved the rubber by vulcanization. Nowadays, there hs many eraser production line.

About Eraser-making
"Plastic + synthetic rubber" are raw materials for most of the erasers.

Eraser-making -- Material Preparation
Synthetic rubber or natural rubber, pumice powder (to increase hardness), iron oxide (to change color), vegetable oil, sulfur, etc.

Eraser-making -- Material Mixing
Heat and stir it, then perfect the mixture in a mill to make the rubber strong and durable.

Eraser-making -- Material Shaping
After stamping, extrusion and molding, the mixture, by cutting, drying, grinding, packaging and so on, becomes erasers of various shapes.

Types of Erasers
Erasers that can remove marks of graphite or ink are stationery made of rubber .
Different erasers, like ordinary white ones, perfumed ones, 2B, 4B, 6B drawing-pencil matched ones, plasticine erasers, and so on, all give proof on their diversified shapes and colors.
In addition to remove pencil marks, erasers can be used to clean walls, leather, shoes, and cars. Moreover, eraser-made stamps, gifts, and crafts can serve as artworks.

HANGZHOU CANDID I / E Co. , Ltd is a professional R & D, production and export enterprise specialized in stationery manufacturing machines. For more information about excellent eraser manufacturing machine, please refer to the websitehttp://www.stationerymachine.com/.

How the Eraser Was Invented(2020年)

candidstationery — 2020-07-08T11:21:10+0900

http://www.stationerymachine.com/how-the-eraser-was-invented.html

Erasers, also called rubbers, are a kind of stationery which can remove pencil marks. The majority of them are white, brown or pink, however, they can now be of any colors as new ingredients are adopted. Rubber, the main ingredient, added with plastic arise the price of eraser.

At the 1770, Joseph Priestley, a British scientist, said, "I have discovered a substance that is very suitable for removing pencil marks. At that time, used throughout Europe to remove the pencil marks, rubber granule, which was cut into a small cube, was named "rubber". Also at 1770, another British engineer, Edward Naime, credited with the inventor of erasers, said that he once accidentally picked up a piece of rubber in replace of bread crumbs, which was used widely to remove pencil marks at that time. After that successful workout, he started making and selling rubber.

The original rubber without being processed was perishable. It wasn't until 1839, inventor Charles Goodyear discovered that vulcanization could improve the rubber that erasers became convenient in use for people. In 1858, a man from Philadelphia, United States, got a patent for embedding an eraser at the end of a pencil, which was abolished for " the two attached, but nothing new ", that is, the pencil and the eraser attached with each other made nothing new as a whole. What made the mass production possible was petroleum-made erasers developed later by scientists.

Moreover, creative ideas bring about adorable figures of erasers, which are more popular among kids. They can not say no to spices-added erasers giving off a charming smell while being consumed! Erasers are almost the same in decades, but now there are new products: Eco-friendly erasers. Main ingredients of Eco-friendly erasers are "synthetic resin, protein and organic compounds" , without any chemicals and toxicities. Being naturally consumed, they have no leftovers.

HANGZHOU CANDID I / E Co. , Ltd is a professional R & D, production and export enterprise specialized in stationery manufacturing machines. For more information about excellent eraser making machine, please refer to website.http://www.stationerymachine.com/.

The Process of Crayon-making(2020年)

candidstationery — 2020-07-08T11:20:44+0900

http://www.stationerymachine.com/the-process-of-crayon-making.html

That dozens of colors may it be, a crayon is a drawing pen made by mixing paint into wax.

Today let's unveil the process of making crayons.

HANGZHOU CANDID I / E Co. , Ltd is a professional R & D, production and export enterprise specialized in stationery manufacturing machines. For more information about excellent Hexagonal crayon making machine, please refer to website.http://www.stationerymachine.com/.

The History Of Automatic Stationery Production(2020年)

candidstationery — 2020-07-08T11:20:14+0900

http://www.stationerymachine.com/the-history-of-automatic-stationery-production.html
1. The necessity of automatic production
For a long time, a company in the industry felt a sense of crisis from the stationery box stamping workshop. The traditional production process of the tinplate stationery box requires workers to go through a series of processes, such as pulling, removing the waste edge, shaping, curling, punching, etc. to complete a stationery box, it requires 8 punches and 8 workers, Not only is the noise in the workshop more severe, but also the operator's risk coefficient is high leading to cause occupational accidents easily. It takes two years to train a skilled worker, but many of these new workers recruited every year would work for less than a month and decide to quit. The age range of workshop workers is from 40 to 50 years old, which may generate a lack of experts, and affect the production capacity greatly.

2. Automated equipment development
Ten years ago, the company envisioned how to carry out automation reform that is to replace traditional processes with automation and to decrease reduction production capacity due to workers' reasons to improve marketing competition.

3. Some experience of automatic production
Through the introduction of four full-automatic iron box stamping lines, the number of workers in the stamping workshop has been reduced from more than 50 in the past to less than 20 at present, reducing the labor intensity of workers, reducing the risk of industrial injury, and the daily average production. And it has increased compared with the traditional process. We are no longer worried about the lack of stamping operators.

HANGZHOU CANDID I/E CO.,LTD. is a professional enterprises specializing in manufacturing stationery making machine, and deal with business of production and export, integrating "production, sales and service". The company has been committed to research and development of professional stationery production line. Leading products: eraser-producing machine, paper clip machine, crayon machine, stapler machine, etc. Please contact us via zmec@china-equipment.com.

Website:http://www.stationerymachine.com/

CANDID Company Profile
CANDID Company Profile
HANGZHOU CANDID I/E CO., LTD，located in Rm703,NO346 Qingtai street is a professional company specialize in stationary machine designing, manufacturing and export. Founded in 2004, our machines have been exported to more than 30 countries. Main market including: Asia, Africa, America, East Europe.

This Is How A Measuring Tape Is Made!(2020年)

candidstationery — 2020-07-08T11:19:30+0900

http://www.stationerymachine.com/
http://www.stationerymachine.com/measuring-tape-making-machine/

HANGZHOU CANDID I/E CO., LTD. is a professional enterprises specializing in manufacturing stationery machines, and deal with business of production and export. We are a professional manufacturer of Measuring tape manufacturing machine. Please consulthttp://www.stationerymachine.com/.