GETO Formwork Solutions

PPVC Housing Precast Formwork System(2022年02月)

daphne — 2022-12-30T13:02:29+0900

https://www.getoformwork.com/product/product-formwork-system-product/product-ppvc-housing-precast-formwork-system-solutions/

Upholding the business philosophy of customer focused, GETO and its partners collaboratively committed into product development and upgrading works for the successful introduction of prefabricated prefinished volumetric construction(PPVC) housing precast formwork system and its complementary products, as in compliance with the construction industrialization agenda proposed by Singapore Government.

Lift Shaft Formwork(2022年02月)

daphne — 2022-12-30T12:55:18+0900

https://www.getoformwork.com/product/product-formwork-system-product/product-lift-shaft-formwork-solutions/

Lift shaft formwork system is used to building lifecore structure which product is including lifting shaft platform, self-climbing shaft platform and etc.

Shaft Formwork Solutions
Lifting shaft platform system can be lifted layer by layer through a tower crane. The whole system can be reset by contraction and expansion, which makes the construction of the lift shaft holistic and mechanistic.

Self-Climbing Shaft Platform System Solutions
It has its own climbing machine, which enable the whole system to climb layer by layer without tower crane. Besides, it is enable whole procedures to be operated by remote control, realizing holistic, mechanical and intelligent construction.

Deck Formwork Solutions(2022年01月)

daphne — 2022-11-23T00:05:51+0900

https://www.getoformwork.com/product/product-formwork-system-product/product-deck-formwork-solutions/

GETO provided aluminium alloy formwork, quick-deck system, table formwork, aluminium framed formwork for deck formwork construction.

Aluminium Alloy Deck Formwork
GETO aluminium alloy formwork realizes great deck casting effect

Aluminium-Framed Deck Formwork
GETO provided aluminium alloy formwork, quick-deck system, table formwork, aluminium framed formwork for deck formwork construction.

Quick-Deck System
With the advantages of well-structured, strong, highly reusable and easy-to-operate, GETO quick-deck system can be well-integrated with used aluminium formwork system, as in maximizing the reusable rate of aluminium formwork system in stock.

Table Formwork
Table formwork is a large-scale tool formwork catered to form cast-in-situ reinforced concrete floor slab of more than 4m in height, and greater thickness. It can be demoulded and transported as a whole

Timber Formwork
GETO provided aluminium alloy formwork, quick-deck system, table formwork, aluminium framed formwork for deck formwork construction. Timber formwork can be used with aluminium beam formwork.

Wall and Column Formwork Solutions(2022年01月)

daphne — 2022-11-22T23:59:51+0900

https://www.getoformwork.com/product/product-formwork-system-product/product-wall-and-column-formwork-solutions/
GETO provided flat-tie aluminium alloy formworks, tie-rod aluminium alloy formworks, single-sided wall panel, aluminium framed plastic/ timber formwork for wall and column formwork construction.

Aluminium Alloy Wall and Column Formworks
GETO can manufacture cylinder-shaped, square-shaped and other custom shaped aluminium column and wall formwork with flat-tie reinforcement method.

Single-Sided Wall Panel
GETO single-sided wall panel is suitable for the construction of single-sided wall structure in basements. The system is lightweight, and easy-to-operate. The overall cost of the lightweight single-sided wall system is relatively lower.

Aluminium-Framed Plastic/Timber Formwork
GETO provided flat-tie aluminium alloy formworks, tie-rod aluminium alloy formworks, single-sided wall panel, aluminium framed plastic/ timber formwork for wall and column formwork construction.

Comprehensive Aluminium Formwork System Solutions(2022年01月)

daphne — 2022-11-22T23:53:45+0900

https://www.getoformwork.com/product/product-formwork-system-product/product-comprehensive-system-solutions/
Following the uptrend of global environmental sustainability initiatives, aluminium formwork system implied with green building concept is the most optimal choice for the development of contemporary construction industry.

All building components including wall, beam, slab and other structures such as drip line and so on can be formed in one-time pouring by comprehensive aluminium formwork system. Moreover, our formwork system has high turnover rate for its mutual use between different structures.

1、System

Flat-Tie + Hollow Section + Aluminium Formwork + Steel Accessories

Materials for wall and column formworks with embedded flat-ties:
Embedded flat-ties; b. Aluminium alloy wall panels with grooves at their edges; c. Hookies; d. Hollow sections; e. Flat-tie raking shores; f. Pins and wedges
Materials for wall and column formworks with reusable flat-ties:
Reusable flat-ties; b. Flat-tie sleeves; c. Aluminium alloy wall panels with grooves at their edges; d. Hookies; e. Hollow sections; f. Flat-tie raking shores; g. Pins and wedges
The features of flat-tie system:
The formwork reinforcement system of flat-tie type has lighter accessories in weight. It has smaller gaps for the distances between raking shores, which makes it more flexible for precision adjustments and more convenient for verticality control. Therefore, the casting result of the concrete wall using flat-tie reinforcement formwork system has better verticality. There is no obvious holes left in the concrete wall upon the dismantlement of the formwork system with embedded flat-ties, as the 2 edges of the flat-tie will be cut by using particular tools. Therefore, the cost for hole filling afterwards can be saved up, while the waterproof construction quality for the wall body is more guaranteed.

Tie-Rods + Walers + Aluminium Formwork + Steel Accessories

Materials for wall and column formwork using tie-rod system
Tie-rods; b. Aluminium alloy wall panels; c. Walers; d. Hexagonal nuts; e. Gaskets; f. Waler brackets; g. Tie-rod raking shore
The features of tie-rod system:
The main components of the tie-rod reinforcement system are tension tie-rods, walers and raking shores. The functions of these components are integrated to guarantee the strength, durability and stability of the system. Upon the completion of the tension tie-rod and waler reinforcement, the stability of the overall wall body will become stronger. After the tie-rod formwork system is dismantled, many tie-rod holes will be left in the wall body, where special waterproofing measures should be done to the tie-rod hole positions.

2、Application Scope：Typical floors, similar house type and others; Apartments; Office towers; Terrace houses; Hotels