Kingst Commercial and Trade Co.,Ltd

ETCO2 & Anethesia Multi-Gas Filter(2023年06月08日)

ekingst — 2023-05-25T18:08:47+0900

https://www.ekingst.com/products/etco2-filter.html

The T4F and T4M water filter are used for sidestream module and it can be installed on it's receptacle (Fi-Lock). The Luer-lock female socket of T4F can connect sampling line or nasal cannula having Luer-lock male plug, and the Luer-lock male socket of T4M can connect sampling line or nasal cannula having Luer-lock female plug. This filters can protect gas sensor from damage of moisture, secretion, bacteria and dust.

If the hydrophilic wick of the filter is full of dipped water during using, the anti-bacterial filter will be occlusive for gas, then the filter is needed to be replaced.

APPLICATION SCENARIOS OF ETCO2 FILTER

If the hydrophilic wick of the filter is full of dipped water during using, the anti-bacterial filter will be occlusive for gas, then the filter is needed to be replaced.

As one of the most professional oem medical device manufacturers, we provide capnography filter line, etco2 filter line, capnography filter, continuous etco2 monitoring, etc. For more information, please feel free to contact us!

ETCO2 & Anethesia Multi-Gas Adapter(2023年06月07日)

ekingst — 2023-05-25T18:08:00+0900

https://www.ekingst.com/products/etco2-airway-adapter.html

The Airway Adapters are available for adults, children and Newborns.

Disposable and reusable adapters are optional.

When connecting, the connection should be tightened and not leaked. After each use, wipe it off with 75% alcohol and dry it before using it on a new patient.

APPLICATION SCENARIOS OF etco2 adapter
When connecting, the connection should be tightened and not leaked.
After each use, wipe it off with 75% alcohol and dry it before using it on a new patient
Packing specification is 1pc/box

As a professional etco2 airway adapter manufacturer, we provide end tidal co2 adapter, airway adapter co2, airway adapter kit, co2 airway adapter, infrared capnography, etc. For more information, please feel free to contact us!

Portable Anesthesia Multi-gas Monitors-AneSure™ Mini(2023年06月06日)

ekingst — 2023-05-25T18:07:24+0900

https://www.ekingst.com/products/anesure-portable-anesthetic-gas-monitors-anesure-m/

AneSure-Mini can simultaneously measure anesthetic gas, ETCO2 and respiratory rate. Suitable for Emergency, Pre-hospital and Intra-hospital transport, Operating room as well as ICU.

Features of AneSure Portable Anesthesia Multi-gas Monitors-AneSure™ Mini
01.
Portable And Lightweight
Suitable for emergency, pre-hospital and intra-hospital transfer, operating room, ICU, enhancing the safety of anesthesia

02.
Alarm For Data Overrun And Suffocation
Quick warm-up with the first value displayed in 5 seconds, and accurate readings displayed in 15 seconds. 24-hour trend graphs, not lost when power off

03.
Large Character Mode
The data can be clearly seen from 5 meters away;

Turn on the unit, and it is ready to use instantly with no need to calibrate;

Automatic atmospheric pressure compensation; Economical adapters reduce usage costs.

04.
Data output via USB and Bluetooth (optional)
Wired and wireless transmission, convenient for data storage

05.
Firm And Durable
Suitable for various medical environments (field, helicopter, etc.)

APPLICATION SCENARIOS OF ANESURE PORTABLE ANESTHESIA MULTI-GAS MONITORS-ANESURE™ MINI
Portable, accurate and real-time anesthetic multi-gas monitor

AneSure-Mini can simultaneously measure anesthetic gas, ETCO2 and respiratory rate. It is suitable for Emergency, Pre-hospital and Intra-hospital transport, Operating room as well as ICU.

It has an alarm function, which will alarm when the measured value reaches the alarm limits or when suffocation occurs.

The first data can be obtained within 5 seconds after power-on, and full accurate data can be obtained within 15 seconds; the 24-hour Etco2 graph will not be lost when power off.

It has a large-character display mode, and the data can be clearly seen from more than 5 meters away.

It is ready to use after power on.

With simple maintenance and sturdy structure, suitable for various harsh environments.

For more information about infrared capnography and anesthetic agent analyzer, please feel free to contact us!

Anesthesia Multi-Gas Monitors(2023年06月05日)

ekingst — 2023-05-25T18:06:17+0900

https://www.ekingst.com/products/anesthesia-multi-gas-monitors/

Anesthetic gas analyzer monitor has wide applications. It can measure and monitor the concentration of CO2, functional oxygen saturation SpO2, Pulse and N2O concentrations. Also anesthetic gas monitor is also useful for the following: Halothane, Enflurane, Isoflurane, Sevoflurane and Desflurane.

Features of anesthesia gas monitoring
1.Portable and lightweight mainstream multi-gas monitor, suitable for emergency, pre-hospital and intra-hospital transfer, operating room, ICU, enhancing the safety of anesthesia

2. Alarm for data overrun and suffocation. Quick warm-up with the first value displayed in 5 seconds, and accurate readings displayed in 15 seconds. 24-hour trend graphs, not lost when power off

3. Turn on the unit, and it is ready to use instantly with no need to calibrate.

4.Automatic atmospheric pressure compensation; Economical adapters reduce usage costs.

5.Data output via USB and Bluetooth (optional).

6.Firm and durable, suitable for various medical environments (field, helicopter, etc.)

As one of the most professional oem medical device manufacturers, we provide respiratory gas analyzer, anesthetic gas analyzer, gas analyzer anesthesia machine, anesthesia gas analyzer, infrared capnography, etc. For more information, please feel free to contact us!

Anesthesia Multi-gas Detector AneSure™-S(2023年06月04日)

ekingst — 2023-05-25T18:05:41+0900

https://www.ekingst.com/products/anesthesia-multi-gas-detector-anesure-s/

Side stream anesthesia multigas sensor, can simultaneously measure the concentration waveform and data of CO2, N2O, anesthetic gases, as well as respiratory rate. The types of anesthetic gases measured include halothane, enflurane, isoflurane, sevoflurane and desflurane. The user can manually select the type of anesthetic gas.

Features of Anesthesia Multi-gas Detector AneSure™-S
01.
Reliable multi gas OEM solution
Reliable multi gas OEM solution. Equipped With Oxygen Battery. Compatible with a variety of protocols, so that your products can be quickly upgraded and assembled.

02.
Side Stream Mode
Can simultaneously measure the concentration waveform and data of CO2, N2O，Anesthetic gas, as well as respiratory rate. The types of anesthetic gases measured include halothane, enflurane, isoflurane, sevoflurane and desflurane. The user can manually select the type of anesthetic gas.

03.
Plug And Play
The host does not need internal circuit, just a serial port. The sampling pump with super long service life can measure data within 4 seconds after power on. Suitable for adults, children and newborns. Advanced filter, can also be used in heavy humidity environment for a long time, reducing the cost of use.

04.
Automatic Pressure Compensation
There is a built-in atmospheric pressure sensor, which is suitable for various altitude ranges.

05.
High-precision
Careful selection of infrared devices, hardware design and software algorithm, to achieve high signal-to-noise ratio, to ensure the measurement accuracy for temperature range of - 5-50 °C and in the range of 0 - 20%.

APPLICATION SCENARIOS OF ANESTHESIA MULTI-GAS DETECTOR ANESURE™-S
Reliable multi gas OEM solution. Equipped with Oxygen battery. Compatible with a variety of protocols, so that your products can be quickly upgraded and assembled.

Side stream mode, can simultaneously measure the concentration waveform and data of CO2, N2O，anesthetic gas, as well as respiratory rate. The types of anesthetic gases measured include halothane, enflurane, isoflurane, sevoflurane and desflurane. The user can manually select the type of anesthetic gas.

Plug and play, the host does not need internal circuit, just a serial port. The sampling pump with super long service life can measure data within 4 seconds after power on. Suitable for adults, children and newborns. Advanced filter, can also be used in heavy humidity environment for a long time, reducing the cost of use.

There is a built-in atmospheric pressure sensor, which is suitable for various altitude ranges.

High-precision. Careful selection of infrared devices, hardware design and software algorithm, to achieve high signal-to-noise ratio, to ensure the measurement accuracy for temperature range of - 5-50 °C and in the range of 0 - 20%.

For more information about infrared capnography, please feel free to contact us!

Anesthesia Multi-Gas Detector(2023年06月03日)

ekingst — 2023-05-25T18:05:07+0900

https://www.ekingst.com/products/anesthesia-multi-gas-detector/

Our Anesthetic Gas Detector/Module can simultaneously measure the concentration waveform and data of CO2, N2O，anesthetic gas, as well as respiratory rate. The types of anesthetic gases measured include halothane, enflurane, isoflurane, sevoflurane and desflurane. The user can manually select the type of anesthetic gas.

Features of Anesthesia Multi-gas Detector/anesthetic gas module
1.Compatible with a variety of protocols, so that the products can be quickly upgraded and assembled.

2. Plug and play, the host does not need internal circuit, just a serial port. Can measure data within 4 seconds after power on. Suitable for adults, children and newborns.

3. Can also be used in heavy humidity environment for a long time, reducing the cost of use.

4. Automatic pressure compensation. There is a built-in atmospheric pressure sensor, which is suitable for various altitude ranges.

5. High-precision. Careful selection of infrared devices, hardware design and software algorithm, to achieve high signal-to-noise ratio, to ensure the measurement accuracy for temperature range of - 5-50 °C and in the range of 0 - 20%.

How Do Anesthesia Gas Analyzers Work?

The Monitor is based on the principle that different gases absorb the infrared of a particular wavelength. For examples, CO2 sensitive wavelength is 4.26 um, N2O sensitive wavelength is 4.5 um, and the sensitive infrared wavelengths of the five anesthetic gases distribute between 7.5-10.5 um. We can choose one wavelength as reference which is not sensitive to these gases. When the concentration of the monitored gas changes, its absorbed dose of the sensitive infrared varies accordingly, but the reference infrared does not change. The monitor employs a four-channel sensor, with every channel having an optical filter that only allows a narrow band wavelength to pass through, and the central wavelength passing through each optical filter is different. Take CO2 for example, when one beam of infrared passing through sampling gas with CO2 molecule reaches infrared sensor, the CO2 channel measures the residual infrared signal, while the reference channel measures initial infrared, then we use standard gas with known CO2 concentration to calibrate the specific ratio between the two channel signal, then store the calibrated parameter into the internal storage and User Manual of Mainstream Multigas Monitor 23 of 50 then we can measure CO2concentration in the rated range. Likewise, the principles for measuring the N2O and selected anesthetic gas concentrations are same.

Benefits of Anesthesia Multi-gas Detector/anesthesia gas module
Mainstream and sidestream modes
Compatible with multiple protocols
Plug and Play
Flexible upgrade
Provide you with a one-stop solution for your clinical needs
Excellent performance and reasonable price

For more information about capnography price, please feel free to contact us!

Accessories For ETCO2 & Anethesia Multi-Gas Monitors and Modules(2023年06月02日)

ekingst — 2023-05-25T18:04:10+0900

https://www.ekingst.com/products/accessories-for-etco2-monitor/

The consumables and accessories produced by Kingst are all made of high-quality raw materials, with superior performance. T4F filters are our patented products, which can dehumidify and filter bacteria, and can still be used normally even in harsh environments. The adapter for mainstream products has superior and stable performance, easy operation, and is suitable for use in various scenarios.

Features of Kingst ETCO2 Capnography Parts & capnography supplies
The main consumables are adapters for mainstream monitors and filters for sidestream monitors. The adapter is suitable for users of all ages, and has a small weight, low dead space, suitable ET tube size, and high-quality materials for production, so that the measured data is very accurate.

The filter can well achieve functions such as filtration of water vapor and bacteria, and only needs to be wiped and disinfected with alcohol. And long service life. So that the measurement data will not be affected by moisture.

For more information about etco2 monitor, please feel free to contact us!

Normal EtCO2 Waveform Capnography Monitor Device(2023年06月01日)

ekingst — 2023-05-25T18:03:32+0900

https://www.ekingst.com/products/

As a technology-based company, we have been focusing on developing and innovating carbon dioxide modules and monitors for more than 20 years. And we have been promoting etco2 series modules and cooperating with many well-known medical companies since 2008. Our products have obtained CE and ISO9000 certifications, and all products conform to RoHS. In 2020, its mainstream and side stream etco2 modules have been certified by US FDA. In addition, Beijing Kingst Commercial has successively launched the AneSure series of mainstream and side stream multi-gas modules and multi-gas monitors.

Types of Capnography Monitor Machine for Sale
We have ETCO2 products and anesthetic multi-gas products. The ETCO2 products are divided into ETCO2 monitors and ETCO2 modules. And Anesthetic multi-gas products are divided into Anesthetic Gas Detectors and Sensors. In addition, there are consumables to match the above modules and monitors.

Operation Principles of Capnography machine
The partial pressure of CO2 in the end-breathing gas can be determined according to the principle of infrared spectroscopy, mass spectrometry or spectroscopy.

Among them, infrared spectroscopy is the most widely used method. It mainly uses CO2 to absorb infrared rays with a wavelength of 4.26um, which attenuates the amount of infrared beams. The degree of attenuation is proportional to the CO2 concentration.

Understanding Normal Capnography Monitoring Devices Parameters
End-tidal CO2 concentration, or partial pressure (ETCO2), measured by Capnography Monitoring Devices, reflects pulmonary ventilation as well as pulmonary blood flow. When there is no obvious cardiopulmonary disease and the V/Q ratio is normal. ETCO2 can reflect PaCO2 (arterial blood carbon dioxide), normal ETCO2 is 5% equivalent to 5KPa (35-45mmHg).

When end-tidal carbon dioxide is too high: its physiological significance is that the alveolar ventilation is insufficient or the input of CO2 to the alveoli increases. And when End-tidal carbon dioxide is too low: mainly alveolar hyperventilation or reduced CO2 input to the alveoli.

What is waveform capnography monitor machine uses?
Waveform capnography measures end-tidal partial pressure of carbon dioxide. This partial pressure value is called end-tidal CO2 or EtCO2. Its waveform can provide doctors with important information about a patient's health. Such as airway positioning, whether breathing is inhibited, and whether spontaneous breathing is restored as well as guidance on ventilator work.

Normal EtCO2 levels are 35 to 45 mm Hg and the waveform is generally trapezoidal. As the respiratory rate and tidal volume change, so do the waveforms and values.

As one of the most professional capnography machine, we provide waveform capnography machine, waveform capnography device, etco2 machine, etc. For more information about etco2 waveform capnography, please feel free to contact us!

Sidestream EtCO2 Capnography Module Capno-S+(2023年)

ekingst — 2023-04-04T12:14:35+0900

https://www.ekingst.com/products/sidestream-etco2-capnography-module-capno-s+/

A side stream etco2 sensor, accurate and durable, suitable for various complex environments. Compatible with multiple protocols. Plug and play, no zero calibration required. Stable and durable.

Sidestream EtCO2 Capnography Module Capno-S+
A side stream etco2 sensor, accurate and durable, suitable for various complex environments. Compatible with multiple protocols. Plug and play, no zero calibration required. Stable and durable.

Feature of side stream capnography Module Capno-S+
01.
High Precision
Temperature pressure compensation, timing and self-calibration functions, full-range calibration, to ensure accurate measurement within the range of 0-20%. Plug and play, no circuit inside the host, just a serial port is enough.

02.
Low Energy Consumption
Suitable for battery power supply. It is suitable for adults, children and newborns, with excellent cost performance and low cost. Ultra-long life, ultra-low noise sampling pump, power on within 4 seconds can be measured data.

03.
Automatic Atmospheric Pressure Compensation
There is an atmospheric pressure sensor inside, which is suitable for various altitude ranges. And there is Built-in interference gas compensation algorithm.

04.
Reliable EtCO2 OEM Solutions
A variety of protocols, so that your products quickly upgrade assembly.

APPLICATION SCENARIOS OF SIDESTREAM ETCO2 CAPNOGRAPHY MODULE CAPNO-S+
High signal-to-noise ratio

Capno-S+ is a side stream CO2 module, equipped with high-quality Multi-Channel Narrowband Filters, IR Light Source, Well-designed Hardware Circuit and Software Algorithms to achieve gas concentration measurement with high signal-to-noise ratio;

Long continuous working time

For side stream modules, there are built-in long-life sampling pumps, ensuring a one-way flow of exhaled air; and high-quality filter that can work for a long time even in high temperature environment.

Plug-and-play

It can be used in conjunction with a multi-parameter monitor. The monitor only needs one interface, which can be connected to the module for use.

Atmospheric pressure compensation

There is an internal atmospheric pressure sensor, which can automatically adjust the atmospheric pressure and suitable for various altitude ranges and harsh environments;

OEM solutions

We provide the reliable carbon dioxide OEM solutions, with multiple protocols, so that products can be quickly upgraded and assembled.

As one of the most professional oem medical device manufacturers, we provide sidestream end tidal co2 monitoring, capnography sidestream, sidestream capnometer, etc. For more information about continuous etco2 monitoring, please feel free to contact us!

Sidestream EtCO2 Capnography Module Capno-S(2023年)

ekingst — 2023-04-04T12:14:03+0900

https://www.ekingst.com/products/sidestream-etco2-capnography-module-capno-s/

A sidestream etco2 sensor, accurate and durable, suitable for various complex environments. Compatible with multiple protocols. Plug and play, no zero calibration required. Stable and durable.

Features of sidestream co2 module Capno-S
01.
Plug And Play
There is no circuit inside the host, just a serial port.

02.
High Precision
Temperature pressure compensation, timing and self-calibration functions, full-range calibration, to ensure accurate measurement within the range of 0-20%

03.
Long Service Life And Extremely Low Noise
The gas circuit, hardware and software are carefully designed to ensure the long-term stability of the module

04.
Low Power Consumption
Suitable for battery-powered use, automatic pressure compensation. Maintain measurement accuracy in an extremely wide air pressure range of 400-960mmHg.

05.
Patented Water Filters
The Filters can work continuously for a long time, and can be reused, reducing the user's cost.

06.
Dedicated Fi-lock Air Inlet Interface
Intelligent identification and light indication of filter insertion and breathing status.

07.
Complete EtCO2 OEM Solutions
Multiple communication protocols, and more than 20 years of accumulated technology and experience, easily help you achieve technical and practical improvements

APPLICATION SCENARIOS OF SIDESTREAM ETCO2 CAPNOGRAPHY MODULE CAPNO-S

High signal-to-noise ratio

Capno-S is a sidestream etco2 module.
It is equipped with high-quality Multi-Channel Narrowband Filters, IR Light Source, Well-designed Hardware Circuit and Software Algorithms to achieve gas concentration measurement with high signal-to-noise ratio;

Long continuous working time
For side stream modules, there are built-in long-life sampling pumps, ensuring a one-way flow of exhaled air; and high-quality filter that can work for a long time even in high temperature environment.

Plug-and-play
It can be used in conjunction with a multi-parameter monitor. The monitor only needs one interface, which can be connected to the module for use.

Atmospheric pressure compensation
There is an internal atmospheric pressure sensor, which can automatically adjust the atmospheric pressure and suitable for various altitude ranges and harsh environments;

OEM solutions
We provide the reliable carbon dioxide OEM solutions, with multiple protocols, so that products can be quickly upgraded and assembled.

If you want to know the details of disposable capnography, please visit our website.

Sampling Tube/Line(2023年)

ekingst — 2023-04-04T12:13:35+0900

https://www.ekingst.com/products/sampling-tube.html

Optional for adults or children, it is a disposable product;

After using this product, it should be disposed of in accordance with the requirements of the hospital or environmental protection department;

If the packaging is damaged, and it is prohibited to use;

This product should be stored in a cool, dry, well-ventilated, clean room with a relative humidity of not more than 80%, no corrosive gases.

APPLICATION SCENARIOS OF SAMPLING TUBE

Optional for adults or children, it is a disposable product, the standard package: 5pcs/pack;

After using this product, it should be disposed of in accordance with the requirements of the hospital or environmental protection department;

This product is for one-time use only, the packaging is damaged, and it is prohibited to use;

This product should be stored in a cool, dry, well-ventilated, clean room with a relative humidity of not more than 80%, no corrosive gases.

As one of the most professional oem medical device manufacturers, we provide anesthesia gas sampling line disposable, etco2 sample line price, end tidal co2 sampling line, capnography sampling line, capnography line, capnography tube, gas sampling line anesthesia, etco2 line, etc. For more information about end tidal co2, please feel free to contact us!

Nasal Tube(2023年)

ekingst — 2023-04-04T12:13:08+0900

https://www.ekingst.com/products/nasal-tube.html

Optional for adults or children, disposable product.

After using this product, it should be disposed of in accordance with the requirements of the hospital or environmental protection department

This product should be stored in a cool, dry, well-ventilated, clean room with a relative humidity of not more than 80%, no corrosive gases

APPLICATION SCENARIOS OF NASAL TUBE

Optional for adults or children, disposable product.

This product is for one-time use only, the packaging is damaged, and it is prohibited to use.

This product should be stored in a cool, dry, well-ventilated, clean room with a relative humidity of not more than 80%, no corrosive gases.

As one of the most professional oem medical device manufacturers, we provide sterilizing nasal cannula, nasal cannula with pendant, nasal cannula with bulb purpose, nasal cannula for preemies, infant nasal suction tube, comfort flow high flow nasal cannula, cannula for newborns, cannula for nebulizer, etc. For more information about etco2 monitoring, please feel free to contact us!

Nasal Oxygen Tube(2023年)

ekingst — 2023-04-04T12:12:36+0900

Nasal Oxygen Tubehttps://www.ekingst.com/products/nasal-oxygen-tube.html

Disposable and intended for single patient use only, avoid freezing or overheating during use and storage.

Set the oxygen flow level prescribed by the doctor, connect the tubing that ensures the flow to the oxygen supply.

APPLICATION SCENARIOS OF NASAL OXYGEN TUBE
Disposable and intended for single patient use only, avoid freezing or overheating during use and storage

Can be positioned according to the position of the socket; slip the tube behind the ear and slide the sleeve tube towards the neck for a comfortable chin fit

Monitoring Petco2 via ETCO2 sampling port

Set the oxygen flow level prescribed by the doctor, connect the tubing that ensures the flow to the oxygen supply

As one of the most professional oem medical device manufacturers, we provide oxygen conserving nasal cannula, oxygen cannula with tab, oxygen cannula with reservoir, nostril oxygen tube, wearing oxygen cannula, end tidal co2 monitoring, etc. For more information about types of cannula for oxygen or capnography nasal cannula price, please feel free to contact us!

Mainstream EtCO2 Capnography Module Capno-M+(2023年)

ekingst — 2023-04-04T12:12:02+0900

https://www.ekingst.com/products/mainstream-etco2-capnography-module-capno-m+/

An original patented product that can be used for both intubated patients and non-intubated patients, breaking through the limitation that mainstream modules can only be used for intubated patients.

Features of mainstem intubation etco2 Capnography Module Capno-M+
01.
Patented Products
With its compact design and two kinds of adapters, the mainstream module can be used for intubated patients and non-intubated patients. Breathing light intuitively and qualitatively reacts to real-time concentration.

02.
High Precision
Careful selection of infrared devices, hardware design and software algorithm, to achieve high signal-to-noise ratio and ensure the measurement accuracy within the temperature range of -5-50°C and the measurement range of 0-20%.

03.
Suitable For Adults, Children and Newborns
Excellent performance and low cost. Plug and play, the host does not need internal circuit, but just a serial port. The data can be measured within 4 seconds after power on.

04.
Automatic Pressure Compensation
There is an atmospheric pressure sensor inside, which is suitable for various altitude ranges. Built in interference gas compensation algorithm.

05.
Reliable Carbon Dioxide OEM Solutions
A variety of protocols, so that your products quickly upgrade assembly.

APPLICATION SCENARIOS OF mainstream end tidal co2 CAPNOGRAPHY MODULE CAPNO-M+
Innovative Patented Products

Capno-M+ is an innovative carbon dioxide module independently developed by Kingst, which can be used for both intubated and non-intubated patients. It breaks through the limit that the mainstream modules can only be used for intubated patients in the past.

High Accuracy

It is equipped with high-quality Infrared device, hardware design and software algorithm to achieve gas concentration measurement with high signal-to-noise ratio;

Low Consumption and Easy to use

A variety of adapters for adults, children and newborns, cost-effective, reduce the cost of use;

Plug and Play，

No circuit is required inside the host, only one serial port is needed, and the data can be measured within 4 seconds after power-on;

Automatic Pressure Compensation

There is an internal mainstream etco2 sensor, suitable for various altitude ranges, and a built-in interference gas compensation algorithm;

OEM Solution

Reliable CO2 OEM solution, compatible with multiple protocols, enabling you to quickly upgrade your product.

For more information about capnography monitoring, please feel free to contact us!