JWELL MACHINERY（CHANGZHOU）CO., LTD

PVC, PE, PP, PVDF Thick Plate Extrusion Line(2024年)

jwell2023 — 2024-02-28T10:42:02+0900

https://www.jwellextruderglobal.com/products/pvc-pe-pp-pvdf-thick-plate-extrusion-line/

The newly developed PVC, PE, PP, PVDF thick plate extrusion line by our company can be up to 2 meters wide, and the equipment manufacturing technology is ahead of the peers. Our plate extrusion machine adopts high-performance single screw extruder, intelligent computer control system and precise temperature system to release equipment capacity as much as possible and improve production efficiency and product quality.

For plate production of different materials, we provide customized equipment that conforms to material characteristics to ensure high-yield production and high-quality plate. Also, we provide complete solutions and sustainable after-sales service during your machine installation and production.

PVC, PE, PP, PVDF Thick Plate Board Introduction

PVC thick board has the advantages of smooth and smooth surface, no water absorption, no deformation and easy processing. It is an excellent thermoforming material and can replace some stainless steel and other corrosion resistant synthetic materials, which is widely used in chemical industry, petroleum, electroplating, water purification, environmental protection equipment, mining, pharmaceutical electronics, communications, anti-corrosion containers, equipment electrical shields, light boxes, advertising decoration and other industries.

As a high-quality engineering material, PE thick board can be widely used in chemical equipment, electric power industry and mechanical equipment manufacturing.

PP thick board can be widely used in chemical industry, food industry, anti-corrosion industry, purification industry and environmental protection equipment production industry.

PVDF board is a pure board made of polyvinylidene fluoride resin through high-temperature extrusion. The extrusion process does not contain additives. It is widely used in petrochemical, electric power, metallurgy, papermaking, textile, pharmaceutical and atomic energy industries, especially suitable for the transmission of pure chemical reagents in pure water system and semiconductor industry.

Advantages of PVC, PE, PP, PVDF Thick Plate Extrusion Line
01.
High output, energy saving, easy operation, reliable after-sales service.

02.
Special designed screw which is more suitable for process PVC, PE, PP, PVDF material.

03.
The internal flow channel of our mold is chrome plated and highly polished to guarantee smooth surface and good quality of final products.

04.
Equipped with advanced famous brand motor, imported inverter and smart operation system.

05.
High speed hard gear reducer based on Germany technology, low noise and energy-saving with fan cooling system, automatic temperature control system.

Specification of PVC, PE, PP, PVDF Thick Plate Extrusion Line

ModelJW120-1600JW150-2100JW170-2600SJZ80/156-1500
Suitable materialPP, PE, ABS, PVDFPP, PE, ABSPP, PE, ABSPVC
Products width1220mm1500mm2000mm1220mm
Products thickness3-30mm3-30mm3-30mm3-30mm
Designed capacity350kg/h500kg/h700kg/h400 Kg/h

The Application of PVC, PE, PP, PVDF Thick Plate Extrusion Line
PVC, PE, PP, PVDF thick plates boards are mainly used in chemical industry, food, environmental protection, purification, communication and electrical industry.

JWELL Extrusion Machinery Co. Ltd is a pp sheet machine factory, we provide polyester yarn making machine, pp sheet extrusion line china, pp sheet extruder machine, pe foam extrusion line, pp pe board extrusion line, pe sheet extrusion, hdpe blow moulding machine. Contact us to know more.

If you are looking for a reliable plastic extruder machine manufacturer, don't hesitate to contact us!

PVC Medical Tube Extrusion Line(2024年)

jwell2023 — 2024-02-28T10:41:29+0900

https://www.jwellextruderglobal.com/products/pvc-medical-tube-extrusion-line/

With the increasing demand of the medical industry, JWELL newly develops precision medical tube making machine for various application, such as three or two layers of medical light-proof infusion tube, endotrscheal tube, vein medical tube, blood transfusion tube, multi cavity tube and trachea cannula.

Different screw structures are designed according to different material characteristics, which is suitable for the extrusion of various material such as PA, TPU, PE, SPVC, PEbax, PP, POM, PCTG, PE + Ba 804 granule.

The medical tubes produced with our equipment fully comply with industry standards. We also have provided complete solutions for many customers to help them develop this market.

Advantages of PVC Medical Tube Extrusion Line
01.
High efficient plasticization and precise control of die and flow enable high quality tubes.

02.
Adopt avoid adjustment mold structure, inner and outer layer uniform distribution, mold flowing channel with no corner, quick and convenient dismantle, improve production efficiency.

03.
The extruders adopt great man-machine interface and Siemens computer-control operation system, maintenance-free motor (Germany brand) and decelerator direct driving, which can effectively avoid low efficiency and big transmission error of general belt transmission. Dust, grease dirt and noise produced during production process are also avoided.

04.
The cooling tank is made of imported SUS304 stainless steel with complete glass closed structure and stainless steel centrifugal pump for special medical-grade deionized water. Its special low vacuum calibration ensures good roundness and precision of pipes.

05.
Biaxial diameter gauge adopts high velocity laser light source, Japan TOSHIBA high-precision CCD, digital image manipulation, non-contacting measuring for online products and real-time digital display with measuring precision of ±0.003mm.

Specification of PVC Medical Tube Extrusion Line

Equipment modelScrew diameter and L/DPower consumption KW/hrCapacity Kg/hrMachine size (L/W/H, in MM)
JWS2525*25D22~5L7500*W2000*H1780
JWS4545*28D715~40L9500*W2500*H1780
JWS5555*28D (30D)820~55L10500*W2500*H1780
JWS 6565*28D (30D)1140~90L12600*W3000*H1780

The Application of PVC Medical Tube Extrusion Line
JWELL high quality medical tube production machine can produce three or two layers of medical light-proof infusion tube, center vein medical pipe, trachea cannula, etc.

If you need any kinds of pvc extruder, please contact us, as a professional extruder line manufacturer, JWELL machinery china is willing to offer you high quality products.

PVC Hollow Winding Pipe Extrusion Line(2024年)

jwell2023 — 2024-02-28T10:41:02+0900

https://www.jwellextruderglobal.com/products/pvc-hollow-winding-pipe-extrusion-line/

This PVC hollow pipe making machine line is independently designed and manufactured by JWELL, which is more suitable for high-strength waste water drainage in chemical, construction, agriculture, sewage treatment industry and urban drainage system. Our hollow winding pipe production line choose special designed twin screws for better plasticizing, stable temperature control system, scientific equipment structure and high hardness machine frame. Also, the final PVC hollow pipes produced by our extrusion machine meet national standard and have the features of better compression resistance and impact resistance.

UPVC winding pipe is generally made of high-density polyvinyl chloride (PVC) as the material of structural wall pipe, which is produced by hot winding. This winding pipes are generally used in urban sewage drainage system with water temperature less than 45 ℃, outdoor water drainage of buildings, or buried under land for farmland sewage discharge. This winding pipes can also be used for urban pavement water drainage, sewage treatment and discharge of urban sewage treatment plants, drainage of sports plaza projects, and line protection of electronic and telecommunications equipment projects.

HDPE hollow wall winding pipe is also one kind of high-quality chemical material pipes. Large area use of such pipe can effectively reduce pollution and save energy. It is increasingly used in various engineering projects. Our company also provide full pvc pipe extrusion line and technology proposal for HDPE hollow winding pipes. If you have any question or interest, please feel free to contact us at any time.

PVC Hollow Winding Pipe Advantages
01.
Stable chemical performance, strong acid, alkali and salt resistance, corrosion resistance to sewage, wastewater and chemicals, corrosion resistance to soil decay, no rust.

02.
The hollow pipe extrusion line can produce hollow pipes that have strong impact resistance and pressure resistance. The pipe wall adopts a unique I-shaped structure, which has large elastic deformation and is not easy to damage. It has good applicability to any base.

03.
It is resistant to aging and can withstand direct sunlight during storage and construction. In terms of pipe design and production process, factors such as material attenuation in 50 years have been fully considered.

04.
It is applicable to a wide temperature range, from - 50C to 60C, without frost crack and expansion leakage.

05.
Light weight, 1/10 of the cement pipe weight (under the same water delivery efficiency), no large construction equipment is required.

JWELL PVC Hollow Winding Pipe Extrusion Line Advantages
01.
As a leading pipe extrusion line manufacturer in China, JWELL has ranked first in the extrusion industry for 12 consecutive years, making us one of the leaders in China's extrusion machinery industry.

02.
High quality screws&barrel are designed and produced by our own screw company, founded in 1978, producing the first good screw in China. So, we can provide our customers both full production line and reliable after-sales service of screws and barrel.

03.
Our company has 9 large metal processing plants, 3 heat treatment nitriding plants, 1000 + international advanced processing equipment.

04.
More than 30 years of industry experience, over 400 national patents, 10 high-tech cooperative enterprises, more than 1,000 international first-class processing equipment.

05.
Jwell Extrusion Machinery has specialized in plastic extrusion machines for over 25 years and established high-quality supply chain, which means all components of our production lines come from famous brand or responsible manufacturers. When you need change spare parts and after-sales service, we can solve it in time.

Applications of PVC Hollow Winding Pipe Extrusion Line
PVC hollow winding pipes are suitable for waste water drainage in chemical, construction, agriculture, sewage treatment industry and urban drainage system.

If you need any kinds of pvc extruder, please contact us, as a professional extruder line manufacturer, JWELL machinery china is willing to offer you high quality products.

PVC Gutter Extrusion Line(2024年)

jwell2023 — 2024-02-28T10:40:32+0900

https://www.jwellextruderglobal.com/products/pvc-gutter-extrusion-line/

Our high speed SJZ65/132-YF240 model plastic profile extrusion line not only can produce PVC window door profile, but also is suitable small PVC plastic profiles, such as PVC gutter, PVC trunking, PVC edge banding, PVC skirting, PVC sealing strip and other building decoration materials, which have the advantages of great shape, smooth surface, strong hardness and great plasticizing.

Advantages of PVC Gutter Extrusion Line
01.
High output, first-rate equipment quality, energy saving, reliable after-sales service.

02.
Based on smart computer control system, easy operation.

03.
Special screw structure ensures fast feeding and stable plasticizing.

04.
JWELL has ranked first in the extrusion industry for 11 consecutive years, and has become one of the largest plastic extrusion equipment manufacturer in China, which means we could offer you good quality extrusion equipment and reliable after-sales service.

Specification of PVC gutter extruder Line

High speed main technical parameter
TypeYF240YF240YF240A
Max. width of product (mm)240240150*2
Extruder modelSJP75/28SJP93/30SJP110/28
Max.extrusion capacity (kg/h)150-250250-400400-500
Extruder power (kW)455590
Cooling water (m3/h)7810
Compressed air (m3/min)0.60.60.8

Classic type main technical parameter
TypeYF108YF240YF240AYF300YF400
Max. width of product (mm)108240150*2300400
Extruder modelSJZ55/110SJZ65/132SJZ65/132SJZ65/132SJZ80/156
Max.extrusion capacity (kg/h)150250250250450
Extruder power (kW)2237373755
Cooling water (m3/h)788810
Compressed air (m3/min)0.60.60.80.60.6

Find More About PVC Gutter Extrusion Line
Extruder of PVC Gutter Extrusion Line
Extruder
Long service life, excellent stability and corrosion resistance.

High precision gearbox brings high efficiency transmission and lower noise, also the thrust bearing adopts advanced brand.

The machine frame material adopts high hardness steel, more durable.

Calibration Unit of PVC gutter extrusion machine Line
Calibration Unit
Calibration table choose stainless steel material, long using time.

The flow of water and gas can be precisely controlled, perfect coordination of molding products.

Haul Off of PVC Gutter Extrusion Line
Haul Off
Speed precisely controlled by imported inverter.

Integral transmission guarantees stability and flexibility.

Cutter of PVC Gutter Extrusion Line
Cutter
Accurate cutting length, smooth cutting surface.

Manual cutting and automatic cutting choice.

The Application of PVC Gutter Extrusion Line
With the features of corrosion resistance, wear resistance, high temperature resistance and high hardness, PVC gutter is widely used in daily life and animal husbandry industry, such as PVC tank, PVC rain gutter, PVC roof gutter, PVC gutter feeder for chicken or duck, sewage gutter, etc.

If you need any kinds of plastic extruder, please contact us, as a professional extruder line manufacturer, JWELL machine is willing to offer you high quality products.

PVC Foam Board Extrusion Line(2024年)

jwell2023 — 2024-02-28T10:39:55+0900

https://www.jwellextruderglobal.com/products/pvc-foam-board-extrusion-line/

PVC Foam Board Extrusion Line

We have researched and developed on PVC skinning foam extruder machine for over 25 years, and have exported thousands of full PVC foam board production line to many countries with rich experience. Our PVC foam extrusion line adopts professional extrusion technology of free foam board and skinning foam board, so that PVC foam boards produced by our pvc foam board making machine have the features of uniform foaming, smooth surface, low density, high strength and waterproof.

Our PVC skinning foam board extrusion line has the advantages of high automation, stable production, easy operation, high efficient and sustainable after-sales service, which has received much praise from many customers all around the world. Before shipment, each plastic extrusion equipment will undergo strict testing and qualified commissioning.

PVC Foam Board Extrusion Line Advantages
01.
Professional screw structure designed by our own company highly improves the extrusion effect and output.

02.
To fully capitalize the power of our twin screw extruder, complete accessories and technology supporting are available to build high-performance customised lines.

03.
We are a manufacturing vendor with vertical set-up, which means we have a great control of supply chain and we are cost-effective.

04.
Precise temperature and pressure control system, speed monitoring device, which guarantee high quality of final PVC foam board and smooth PVC foam board production process.

05.
Our plastic board extrusion line combine energy conservation and high speed production in this PVC foam extrusion machine.

PVC Foam Board Extrusion Line Specification

ModelCo-extrusion foamed board extrusion lineSkinning foaming board extrusion line
Production width1220~1560mm1220~1560mm
Production thickness5-20mm/20-35mm5-20mm /20-35mm
Extruder modelSJZ65/132, SJZ80/156SJZ80/156
Capacity (Max.)400~550kg/h300~450Kg/h
Main motor power37kw/75kw75kw

PVC Foam Board Extrusion Line Features
Extruder of PVC Foam Board Extrusion Line
Extruder
High efficient twin screw extruder with famous brand motor, imported inverter, great constant temperature oil tank system.

Equipped with gravimeter dosing feeding device, save material, improve efficiency.

Good shearing, high output, reasonable design, high accuracy and easy control.

Adopt high torque transmission system with the characteristics of high precision, low noise and long service life.

Calibration Unit of PVC Foam Board Extrusion Line
Calibration Unit
Cylinder drive or hydraulic drive can be selected for the movement of forming plate.

Equipped with several meters to show specific situation of temperature and pressure.

Cooling Bracket of PVC Foam Board Extrusion Line
Cooling Bracket
Stainless steel roller with polished treatment.

Cooling bracket length: 5000mm.

Cooling roller size: Φ70×1500mm.

Side cutting device, two sets of knife, distance is adjustable.

Haul Off of PVC Foam Board Extrusion Line
Haul Off
Specifications of the 8 pairs rubber rollers: Φ200mmx1500mm.

Speed controlled by imported inverter and reduction motor.

PVC Foam Board Extrusion Line Application
PVC foam boards are widely used in transportation industry, construction and decoration industry, such as boards on ship, plane, bus, train chamber, indoor decorative wall board, building board, cupboard, table board, etc.

After printing, lamination and hot stamping process, the foam boards have various designs and patterns, which are very popular in market.

If you need any kinds of plastic extruder, please contact us, as a professional extruder factory, JWELL machine is willing to offer you high quality products.

PVC Fence Panel Extrusion Line(2024年)

jwell2023 — 2024-02-28T10:39:24+0900

https://www.jwellextruderglobal.com/products/pvc-fence-panel-extrusion-line/

This PVC fence panel making machine line adopts our professional developed SJZ92/188 conical twin screw extruder with the advantages of excellent plasticizing, stable production, easy operation and long service life. Before shipment, each plastic extrusion equipment will undergo strict testing and qualified commissioning.

PVC hollow plate board is composed of PVC resin and calcium carbonate(CaCo3), the product is environmentally friendly and non-pollution, also has outstanding features of smooth surface, acid and alkali resistance, easy to clean, various designs, high hardness and corrosion resistance.

Advantages of PVC Fence Panel Extrusion Line
01.
Professional screw design guarantees low temperature plasticizing of raw material, equipped with good temperature control system of screw inside part, which makes good quality of PVC door panels.

02.
JWELL has ranked first in the extrusion industry for 11 consecutive years, making us one of the leader in China's extrusion machinery industry.

03.
High precision and wear-resisting gear with advantages of high efficiency transmission and lower noise.

04.
Mold adopts special flow channel design to guarantee high extrusion capacity and good melt.

05.
We provide complete solutions from plant planning to final door board and sustainable after-sales service.

Specification of PVC Fence Panel Extrusion Line

TypeYF800YF1000YF1250
Max. width of product (mm)80010001250
Extruder typeSJZ 80/156SJZ 92/188SJZ 92/188
Max. extrusion capacity (kg/h)450750750
Extruder power (kW)55110110
Cooling water (m3/h)131518
Compressed air (m3/min)0.60.81

Find More About PVC Fence Panel Extrusion Line
Extruder of PVC Fence Panel Extrusion Line
Extruder
Based on smart computer PLC control system.

Screw material: alloy steel of high quality, 38CrMoAlA, nitrogen treatment, with the thickness: 0.5~0.7mm, the surface hardness: HV740~940.

Famous brand motor, imported inverter, precise temperature-controller and other high quality components.

Calibration Unit of PVC Fence Panel Extrusion Line
Calibration Unit
Equipped with strong power cooling device and high pressure vacuum control system.

Calibration table and basin are made of stainless steel material.

Independent operation panel.

Haul Off of PVC Fence Panel Extrusion Line
Haul Off
Two caterpillars driven by two reduction motors.

Speed controlled by imported inverter.

The Application of PVC Fence Panel Extrusion Line
PVC fence panels or wide PVC hollow panels have wide applications in outdoor decorative material, animal husbandry and poultry farming, which have many advantages: easy installation, diverse shapes and patterns, light weight, wear resistance, strong hardness, low cost and recyclable.

Especially in poultry farming industry, PVC hollow panels is suitable for guardrail board which is easy to clear and effectively avoid epidemic infection among poultry. It is also helps to keep the poultry activity area clean and realize collective management of poultry, greatly improving the quality of breading and offering animals a healthy and happy life.

For more information about plastic production line and pvc pipe making machine, please feel free to contact us!

PVC Electrical Conduit Pipe Extrusion Line(2024年)

jwell2023 — 2024-02-28T10:38:53+0900

https://www.jwellextruderglobal.com/products/pvc-electrical-conduit-pipe-extrusion-line/

This PVC Electrical Conduit Pipe Extrusion Line can produce different sizes of pipes from 63mm to 630mm and adopts European advanced technology. JWELL has been focused on researching and developing reliable pipe extrusion technology for over 25 years, highly improving the extrusion efficiency.

Advantages of PVC Electrical Conduit Pipe Extrusion Line
01.
High level automation and stable production process.

02.
Extrusion mould is made by high-quality alloy steel and the internal flow channel has been chrome plated and highly polished, which improves the speed of pipe production.

03.
Intelligent computer PLC control system, easy operation.

04.
Our machine line is equipped with safe device to prevent workers from being injured during operation.

05.
Our pipe extrusion machine realizes both high-efficiency and energy-saving production.

Specification of PVC Electrical Conduit Pipe Extrusion Line

ModelPipe Spec (mm)ExtruderMain Power(kw)Output (kg/h)
JWPEG-H63Ø16-Ø63JWS-H 60/4090400
JWPEG-H110Ø20-Ø110JWS-H 60/40110450
JWPEG-H160Ø50-Ø160JWS-H 75/38132500
JWPEG-H250Ø75-Ø250JWS-H 75/38160650
JWPEG-H315Ø110-Ø315JWS-H 75/38160700
JWPEG-H450Ø160-Ø450JWS-H 90/38250950
JWPEG-H630Ø315-Ø630JWS-H 90/382801050

Find More About PVC Electrical Conduit Pipe Extrusion Line
Extruder of PVC Electrical Conduit Pipe Extrusion Line
Extruder
High efficient and energy saving extruder.

Special design 38CrMoAlA screw and barrel, nitride treatment with the thickness 0.5mm-0.7mm, surface hardness: HV740-940, which makes the screw more wear-resistant and durable.

Adopt high torque gear box with Germany technology, long life, low noise and famous motor, famous Inverter, high quality switch, computer PLC system, so you'll find our pipe extrusion line more stable and high-efficient.

Equipped with emergency stop and alarm function to protect your machine and operator.

Mould of PVC Electrical Conduit Pipe Extrusion Line
Mould
The internal flow channel is chrome plated and highly polished, which makes the mould wear and corrosion resistant. You can get great high quality pipes of smooth surface and uniform thickness with our high-speed sizing sleeve.

Vacuum Tank of PVC Electrical Conduit Pipe Extrusion Line
Vacuum Tank
Bran-new 304 stainless steel tank.

Stable vacuum to ensures great pipe shape and thickness.

The Application of PVC Electrical Conduit Pipe Extrusion Line
PVC electrical conduit pipes are mainly used in the project of power cables, communications, optical fiber cables, urban gas supply, urban water supply, urban heating.

As a pvc conduit pipe machine manufacturer, we provide pvc pipe extruder, pvc conduit pipe manufacturing machine, pvc conduit pipe machine, pvc electric pipe making machine, pvc conduit pipe making machine, pvc electrical pipe machine, pvc electrical conduit pipe making machine, china extruder machine, etc. For more information, please feel free to contact us!

PVC Edge Banding Extrusion Line(2024年)

jwell2023 — 2024-02-28T10:38:22+0900

https://www.jwellextruderglobal.com/products/pvc-edge-banding-extrusion-line/

We have extensive experience in the field of plastic Edge Banding production. Our company has absorbed the advanced technology at domestic and abroad and successfully researched and developed this high quality pvc edge banding making machine production line which can meet requirements of customers. The PVC edge banding production line consists of single screw extruder or twin screw extruder, mold, embossing device, vacuum calibration unit, haul-off unit with gluing roller device, air dryer device, cutting device and winder, etc.

Advantages of PVC Edge Banding Extrusion Line
01.
Good plasticizing, high flexibility, accurate control, high capacity and low energy consumption.

02.
High machining and assembly accuracy, extrusion stability and accuracy.

03.
The extruder adopts imported frequency inverter for automatic speed regulation, the temperature control adopts great Japanese brand.

04.
The auxiliary machine with vacuum pump and haul-off unit motor adopt high-quality products for convenient maintenance.

05.
There are over 500 technical engineers and operators working at JWELL, which means we have enough technology resource to support your production.

06.
We are a manufacturing vendor with vertical set-up, which means we have a great control of supply chain and we are cost-effective.

Specification of PVC Edge Banding Extrusion Line

ModelDriving motorScrew rpmCapacityProduct's sizeThicknesss
JWS45/2511KW5-50rpm1520Kg/h12-35mm0.4-1mm
JWS50/2515KW5-50rpm25-30Kg/h12-35mm0.4-1mm
JWS55/2518.5KW5-50rpm30-50Kg/h12-45mm0.42mm
JWS65/2522KW5-50rpm50-60Kg/h12-50mm0.42mm

Find More About PVC Edge Banding Extrusion Line
Extruder of PVC Edge Banding Extrusion Line
Extruder
Special designed screw produced by our own company which was founded in 1978 with rich experience.

High quality PLC control system, high automation.

Calibration Unit of PVC Edge Banding Extrusion Line
Calibration Unit
Coordinated pipeline for water supply and drainage to ensure stable production process.

High pressure vacuum system keeps great product shape.

Haul Off of PVC Edge Banding Extrusion Line
Haul Off
Integration of traction, backside coating, drying.

High production speed.

The process of applying back glue is fully closed and the glue is not easy to volatilize, healthy and safe.

Single traction or double traction optional.

The Application of PVC Edge Banding Extrusion Line
PVC edge banding strips are mainly used for veneering, edge banding, packaging and blistering of furniture and office appliances.

For more information about extrusion line machine, please feel free to contact us!

PC PP PE Plastic Hollow Sheet Extrusion Line(2023年)

jwell2023 — 2023-06-08T16:55:06+0900

https://www.jwellextruderglobal.com/products/pc-pp-pe-plastic-hollow-sheet-extrusion-line/

We're professional plastic china pc sheet extrusion line manufacturer with over 25 years' technical R&D experience and the technology leader in extrusion industry, exporting over 3000 sets complete production line to 120 countries and areas every year. Our PC, PP, PE hollow sheet extrusion line has the advantages of high capacity, low energy consumption, good plasticization, easy operation and stable production process.

PP, PE hollow sheet is a new type of environmental protection packaging material. Compared with the traditional cardboard, this hollow board has the advantages of moisture resistance, corrosion resistance, strong hardness, good toughness, flexible size and low cost. In the process of use, it will not generate dust, and has a long service life, which is 4-10 times longer than that of cardboard.

Our complete PC, PP, PE hollow plate sheet extrusion line has excellent performance based on JWELL advanced extrusion technology, professional screw structure, precise temperature control system and famous brand PLC control system. Compared with ordinary factories, jwell extruder has more than 500 technical engineers and 300 commissioning engineers to provide you with the mature technical advice and long-term stable after-sales technical services to ensure that you can smoothly produce high-quality sheets.

PC PP PE Hollow Sheet Plastic Pipe Extrusion Line Advantages
01.
We provide customized services based on the actual production needs of customers.

02.
Special designed single screw produced by our own factory, which means we also provide fast and reliable after-sales of the screws and barrels.

03.
To fully capitalize the power of our plastic plate extrusion line, a complete range of high quality accessories is available to build high-performance customised equipment.

04.
Energy-efficient single extruder and screw that ensure better homogenization, higher capacity, excellent reliability and unparalleled product quality.

05.
Easy operation, reduce the technical requirements of the operation of workers and save the workshop space effectively.

PC PP PE Hollow Sheet Extrusion Line Specification
Model
JW120/38, JW45/30
JW100/38, JW45/30
JW120/30
JW100/33

Suitable material
PC
PC
PP, PE
PP, PE

Products width
2100mm
1300mm
2100mm
1300mm

Products thickness
2-40mm
2-10mm
2-8mm
1.5-8mm

Main motor power
185kW/22kW
132kW/22kW
132kW
110kW

Designed capacity
450kg/h
300kg/h
350kg/h
200kg/h

PC PP PE Hollow Sheet Extrusion Line Application
PC hollow sheet is mainly used for lighting roofs of office buildings, halls, shopping malls, stadiums and public facilities, and noise barriers of expressways and urban viaducts, etc. PP and PE hollow sheets are mainly used in the fields of electronics, household appliances, bags, machinery, postal services, food, medicine, advertising decoration and other fields as buffer protection packaging boxes.

PVC Wall Panel Extrusion Line(2023年)

jwell2023 — 2023-06-08T16:54:29+0900

https://www.jwellextruderglobal.com/products/pvc-wall-panel-extrusion-line/

Jwell extrusion machinery specializes in complete solutions for various PVC wall panel extrusion line, from plant planing to final profiles. This high speed PVC wall panel extrusion line equipped with special designed conical twin screw extruder which is more suitable for producing various types of PVC wall panels and ceiling panels. Our PVC wall panel production machine has outstanding features of large capacity, high machine quality, easy operation and sustainable service.

The full PVC wall panel extrusion line based on famous brand PLC control system includes mixer, feeding unit, twin screw extruder, mold, calibration unit, haul off unit, cutting unit, film covering unit, stacker, crusher and pulverizer. Before shipment, each PVC wall panel extrusion machine will undergo strict testing and qualified commissioning.

PVC Wall Panel Extrusion Machine Advantages

01.
High output, stable production, long service time, reliable and long-term after-sales service.

02.
Special screw structure highly improves the feeding and stable output.

03.
We have own screw company founded in 1978 for independently research and develop various screw to meet different production requirements, also can ensures sustainable after-sales service.

04.
Optimized temperature and vacuum control system.

05.
Easy operation, reduce the technical requirements of the operation of workers and save the workshop space effectively.

PVC Wall Panel Extrusion Machine Specification

High speed main technical parameter of pvc wall panel extrusion line
Type
YF240
YF240
YF240A

Max. width of product (mm)
240
240
150*2

Extruder model
SJP75/28
SJP93/30
SJP110/28

Max.extrusion capacity (kg/h)
150-250
250-400
400-500

Extruder power (kW)
45
55
90

Cooling water (m3/h)
7
8
10

Compressed air (m3/min)
0.6
0.6
0.8

Classic type main technical parameter of pvc wall panel extrusion line
Type
YF108
YF240
YF240A
YF300
YF400

Max. width of product (mm)
108
240
150*2
300
400

Extruder model
SJZ55/110
SJZ65/132
SJZ65/132
SJZ65/132
SJZ80/156

Max.extrusion capacity (kg/h)
150
250
250
250
450

Extruder power (kW)
22
37
37
37
55

Cooling water (m3/h)
7
8
8
8
10

Compressed air (m3/min)
0.6
0.6
0.8
0.6
0.6

PVC Wall Panel Extrusion Line Features

Haul Off of PVC Wall Panel Extrusion Line
Haul Off
Two tractors driven by two motors.

Speed controlled by imported inverter.

Cutter of PVC Wall Panel Extrusion Line
Cutter
Cutting knife movement and saw working controlled by pneumatic cylinder and PLC program system.

Manual cutting and automatic cutting choice.

Fast cutting, flat section.

PVC Wall Panel Extrusion Machine Application
Our PVC wall panel production machine is able to produce various panels, such as hollow wall panel, flat wall panel, fluted panel, rough surface panels and so on. PVC wall panels from our plastic board making machine are widely used in house building decorative material with advantages like environment friendly, heat insulation, heat preservation, fireproof, sound insulation, fashion, easy to assemble.

If you want to know more applications of plastic pipe extruder, please visit our website.

PVC Foam Board Extrusion Line(2023年)

jwell2023 — 2023-06-08T16:53:56+0900

https://www.jwellextruderglobal.com/products/pvc-foam-board-extrusion-line/

We have researched and developed on PVC skinning foam board extrusion machine for over 25 years, and have exported thousands of full PVC foam board production line to many countries with rich experience. Our PVC foam extrusion line adopts professional extrusion technology of free foam board and skinning foam board, so that PVC foam boards produced by our machine have the features of uniform foaming, smooth surface, low density, high strength and waterproof.

Our PVC skinning foam board extrusion line has the advantages of high automation, stable production, easy operation, high efficient and sustainable after-sales service, which has received much praise from many customers all around the world. Before shipment, each extruder machine for plastic will undergo strict testing and qualified commissioning.

PVC Foam Board Extrusion Line Advantages
01.
Professional screw structure designed by our own company highly improves the extrusion effect and output.

02.
To fully capitalize the power of our twin screw extruder, complete accessories and technology supporting are available to build high-performance customised lines.

03.
Jwell extrusion machinery is a manufacturing vendor with vertical set-up, which means we have a great control of supply chain and we are cost-effective.

04.
Precise temperature and pressure control system, speed monitoring device, which guarantee high quality of final PVC foam board and smooth PVC foam board production process.

05.
Our plastic board extrusion line combine energy conservation and high speed production in this PVC foam extrusion machine.

PVC Foam Board Extrusion Line Specification
Model
Co-extrusion foamed board extrusion line
Skinning foaming board extrusion line

Production width
1220~1560mm
1220~1560mm

Production thickness
5-20mm/20-35mm
5-20mm /20-35mm

Extruder model
SJZ65/132, SJZ80/156
SJZ80/156

Capacity (Max.)
400~550kg/h
300~450Kg/h

Main motor power
37kw/75kw
75kw

PVC Foam Board Extrusion Line Features

Cooling Bracket of PVC Foam Board Extrusion Line
Cooling Bracket
Stainless steel roller with polished treatment.

Cooling bracket length: 5000mm.

Cooling roller size: Φ70×1500mm.

Side cutting device, two sets of knife, distance is adjustable.

Haul Off of PVC Foam Board Extrusion Line
Haul Off
Specifications of the 8 pairs rubber rollers: Φ200mmx1500mm.

Speed controlled by imported inverter and reduction motor.

Cutter of PVC Foam Board Extrusion Line
Cutter
Longitudinal and cross cutting.

14# alloy saw, fast cutting, flat section.

Dust vacuuming unit with powerful vacuum pump.

After printing, lamination and hot stamping process, the foam boards have various designs and patterns, which are very popular in market.

PC PMMA GPPS Sheet & Plate Extrusion Line(2023年)

jwell2023 — 2023-06-08T16:53:29+0900

https://www.jwellextruderglobal.com/products/pc-pmma-gpps-sheet-plate-extrusion-line/

We're professional plastic sheet & plate extrusion machine manufacturer with over 25 years experience and have ranked No.1 in the plastic extrusion industry for 11 consecutive years, accumulating rich manufacturing experience and advanced extrusion technology. Jwell extruder exports over 3000 sets high-level extrusion production line to over 120 countries and areas every year. With high-quality equipment quality and sincere after-sales service, we have won the recognition and support of customers at home and abroad.

Our PC, PMMA, GPPS sheet and plate extrusion line is suitable to produce high quality PC plate, PC corrugated plate, PMMA plate and GPPS plate. The whole plate production line adopts intelligent PLC control system, high-performance single screw developed and made by our own factory, precise temperature control system device, which ensures good product quality and smooth production. Also, we provide 24-hour sustainable service during the whole project: workshop planning, marketing research, installation instructions online or on site, operation training online or on site, free spare parts and equipment upgrade.

PMMA/ACRYLIC is an important optical plastic with good comprehensive performance and optical performance. Its transparency can be comparable to that of optical glass, with light transmittance > 91%, good gloss, light and strong, good molding processability, good chemical resistance and weather resistance. It can be used as optical lens and industrial lens. It is a widely used plastic building material in the world and has incomparable advantages over other building decoration materials (such as glass, plexiglass, etc.).

PC has high toughness (with the same thickness, the impact strength of PC plate is 30-50 times that of PMMA plate), environmental protection, high heat resistance and cold resistance bending resistance, tensile strength equivalent to nylon, high elongation and elastic modulus, good dimensional stability, wear resistance equivalent to nylon, corrosion resistance and high transparency.

GPPS Sheet Extrusion Line Advantages
01.
As one of the leading extrusion equipment manufacturers, Jwell provides complete project solution and customized services.

02.
Special designed single screw produced by our own factory, which means we also provide fast and reliable after-sales of the screws and barrels.

03.
The transmission system based on Germany technology has the features of high precision, low noise and long service life.

04.
High-performance single screw extruder guarantees stable running and high capacity.

05.
Easy operation, energy saving, high speed production.

GPPS Sheet Extrusion Line Specification
Model
JW130/38-2200
JW120/38-1400

Materia
PC, PMMA, GPPS
PC, PMMA, GPPS

Products Width
2200mm
1400mm

Products Thickness
1.5-10mm
1.5-10mm

Extruder Specification
Φ130/38; Φ45/30
Φ120/38

Capacity (Max.)
550kg/h
450kg/h

GPPS Sheet Extrusion Line Application
With its excellent weather resistance, impact resistance and high light transmittance, PC corrugated plate sheets from jwell extruderare widely used on the roof of buildings, such as the sun room, swimming pool, ski resort and other infield passages, station rest booths, etc and has a broad market prospect.

PC endurance plates are applied to interior and exterior decoration materials of commercial buildings, curtain walls of urban buildings, transparent containers for aviation, windshield of motorcycles, aircraft, trains, ships, automobiles, steamboats, submarines and glass military and police shields; Layout of telephone booth, advertising signboard and light box advertising display exhibition; Noise barriers for highways and urban viaducts.

Ordinary PMMA plates produced by our plastic plate extrusion line are mainly used for advertising, decoration, decoration, process products, specimen signs, etc; Plating plate is used for vacuum plating plastic lenses; Lighting guide plate is used for advertising decoration such as ultra-thin light box, LED flat panel display lamp and poster frame; Liquid crystal light guide plate is used for computer, TV and other liquid crystal display components.

PVC Trunking Extrusion Line(2023年)

jwell2023 — 2023-06-08T16:52:59+0900

https://www.jwellextruderglobal.com/products/pvc-trunking-extrusion-line/

By adopting the European advanced extrusion technology, we successfully developed the high speed extrusion line for small profiles, such as PVC trunking, PVC gutter, PVC edge banding, PVC skirting, PVC sealing strip and ABS profiles, which have the features of good shape, smooth surface, strong hardness and great plasticizing.

This PVC trunking extrusion line consists of twin screw extruder, vacuum calibration unit, haul-off unit, cutter and stacker, which has the features of good plasticizing, high output, low power consumption and stable PVC trunking production process.

Advantages of PVC Trunking Extrusion Line
01.
Based on smart computer control system, easy operation.

02.
Special screw structure ensures fast feeding and stable plasticizing.

03.
Jwell extruder china has own screw company founded in 1978 for independently research and develop various screw to meet different production requirements, also can ensures sustainable after-sales service.

04.
JWELL has ranked first in the extrusion industry for 11 consecutive years, making us one of the leader in China's extrusion machinery industry, which means we could offer you good quality extrusion equipment and reliable after-sales service.

Specification of PVC Trunking Extrusion Line

High speed main technical parameter
Type
YF240
YF240
YF240A

Max. width of product (mm)
240
240
150*2

Extruder model
SJP75/28
SJP93/30
SJP110/28

Max.extrusion capacity (kg/h)
150-250
250-400
400-500

Extruder power (kW)
45
55
90

Cooling water (m3/h)
7
8
10

Compressed air (m3/min)
0.6
0.6
0.8

Classic type main technical parameter
Type
YF108
YF240
YF240A
YF300
YF400

Max. width of product (mm)
108
240
150*2
300
400

Extruder model
SJZ55/110
SJZ65/132
SJZ65/132
SJZ65/132
SJZ80/156

Max.extrusion capacity (kg/h)
150
250
250
250
450

Extruder power (kW)
22
37
37
37
55

Cooling water (m3/h)
7
8
8
8
10

Compressed air (m3/min)
0.6
0.6
0.8
0.6
0.6

Find More About PVC Pipe Extrusion Line

Haul Off of PVC Trunking Extrusion Line
Haul Off
Two tractors driven by two independent motors.

Speed controlled by imported imported inverter.

Cutter of PVC Trunking Extrusion Line
Cutter
Cutting knife movement controlled by pneumatic cylinder.

PLC system control system ensures accurate cutting.

Manual cutting and automatic cutting choice.

The Application of PVC Trunking Extrusion Line
PVC trunking or PVC cable duct trunking is usually used in communication industry.

Plastic Extrusion Machine for Film(2023年)

jwell2023 — 2023-06-08T16:52:29+0900

https://www.jwellextruderglobal.com/plastic-extrusion-machine-for-film.html

Our plastic film making machines have wide applications in medical field, solar energy, chemical industry and packaging, also has the features of high output, saving energy, good extrusion performance, great control system and long service life.

The PE, TPU, PVC, EVA film are widely used in medical fields and the TPU film is also used for car protective film. EVA, POE film are mainly used in solar energy battery and the PVB, SGP film are used in multi-layer glass. As a leading extruder machine manufacturer in China, we also pay much attention to latest film products and extrusion technology to improve the performance of our equipment.

As one of the established extrusion machine manufacturers in China, jwell extrusion machinery has specialized in researching and developing plastic extrusion lines for over 25 years with 8 large production bases and has ranked No.1 in the extrusion industry for 13 consecutive years, making us one of the leaders in China's extrusion machinery industry.

Silicon Core Pipe Extrusion Line(2023年)

jwell2023 — 2023-06-08T16:52:00+0900

https://www.jwellextruderglobal.com/products/silicon-core-pipe-extrusion-line/

HDPE silicon core pipe is a new type of three-layer composite pipe with silicone solid lubricant in the middle layer, which has good sealing performance, chemical corrosion resistance and low engineering cost. Silicon core pipe is widely used in optical cable communication network system of highways, railways and so on. It is extruded and compounded synchronously by three plastic extruders. The main raw material is high-density polyethylene, and the core layer is silicone, a solid lubricant with the lowest friction coefficient.
01.
Our silicon core pipe extruder combines high speed production and energy saving.

02.
Special screw geometries to process HDPE and other different polymers.

03.
Adopt smart computer control system, reduce the technical requirements of the operation of workers.

04.
Precise temperature and vacuum pressure control system ensure uniform pipe thickness and smooth surface.

05.
As a top pipe extrusion line supplier in China, jwell extruder's silicon core pipe extruder has the features of long service life, excellent stability and flexibility.

Specification of Silicon Core PE Pipe Extrusion Line
Type
Pipe spec(mm)
Extruder
Max.output(kg/h)
Total power(kw)

JWS-PPR-63(single)
Ø20-Ø63
JWS60x40
100~120
110

JWS-PPR-63(double)
Ø20-Ø63
JWS60x40
200~350
150

JWS-PERT-32(low speed)
Ø16-Ø32
JWS60x40
100~180
110

JWS-PERT-32(high speed)
Ø16-Ø32
JWS60x40
150~250
140

JWS-PERT-32(double)
Ø16-Ø32
JWS60x40
200~300
140

JWS-PE/PERT-63(double)
Ø20-Ø63
JWS60x40
300~400
140

Silicon Core Pipe Extruder Application
Silicon core pipe is an essential component in the optical cable communication industry due to its flexibility, durability, and resistance to environmental factors. Its ability to reduce friction and increase the ease of cable pulling, combined with its ease of installation and maintenance, make it an ideal solution for a wide range of communication applications.

Blow Molding Line(2023年)

jwell2023 — 2023-06-08T16:51:27+0900

https://www.jwellextruderglobal.com/products/blow-molding-line/

Jwell provide 7 types plastic blow molding machines for different application in automobile industry, transportation, chemical packaging, household packaging, medical packaging, water floating tank, fully automatic equipment. With advanced blow molding machine manufacturing technology and sincere service concept, we have established long-term cooperative relations with customers at home and abroad. Based on the mature JWELL extrusion technology, the core processing components including screws, barrel, and metal heating treatment have been newly designed and produced by our own blow molding machine factory. To fully capitalize the power of our extruders plastic, the complete accessories are available to build high-performance customized plastic blow molding machines.

Types Of Jwell Blow Molding Machine
BM5/12/20 Double Station Bottle Blow Molding Machine

BM30/50/100/160 Tank Blow Molding Machine

BM500/1000 Plastic Blow Molding Machine

What is the Extrusion Blow Moulding Process?
Hollow blow molding from jwell extruder china is to put the tubular thermoplastic plastic blank extruded from the extruder and still in a softened state into the molding die, and then introduce compressed air to deform the blank along the mold cavity with the pressure of air, so as to blow the hollow products with short necks. Hollow blow molding has been widely used to produce various thin shell hollow products, chemical and daily packaging containers, and children's toys.

How to Choose Good Qulaity Blowing Molding Machine?
Firstly, you have to choose a experienced manufacturer with advanced technology and reliable after-sales service for the long term. Our company has specialized in plastic extrusion industry for over 25 years, accumulating rich export experience and advanced manufacturing technology. Welcome to choose jwell blow molding machine, contact us for the high quality blow molding machine price!

What is Jwell Blow Moulding Machine Used For?
Plastic blow molding machine can produce plastic container, bottle, tank, jar, barrel, board, children toys and pellet with different size. Our company specializes in this blow molding machine with over 25 years' manufacturing experience and rich export experience.

PP Meltblown Non-woven Fabric Production Line(2023年)

jwell2023 — 2023-03-29T17:20:19+0900

https://www.jwellextruderglobal.com/products/pp-meltblown-non-woven-fabric-production-line/

During the outbreak of COVID-19 in 2019, our company JWELL took the lead in developing a complete production line capable of successfully producing high-quality PP meltblown fabrics with many years of experience in textile and weaving equipment. The whole company worked hard and delivered tens of thousands of production lines, making great contributions to alleviating the epidemic at that time, also exporting many high quality pp non woven fabric making machine to many countries.

Advantages of PP Meltblown Non-woven Fabric Production Line
01.
We provide complete project solution for you from raw material to plant planning, which means that even you have no experience of this product, we will support you.

02.
The melt blown mold adopts the latest runner design to ensure the uniformity and high accuracy of the melt blown cloth, and the manufacturing cost is expensive.

03.
High-accuracy vacuum and temperature control system.

04.
Equipped with double-station screen changer.

05.
Intelligent control system helps you know details data of each part of this machine line in real time. Easy operation and energy saving.

Introduction of PP Meltblown Non-woven Fabric Production Line

PP meltblown non-woven fabric is mainly made of polypropylene, and the fiber diameter can reach 1-5 microns. There are many voids, fluffy structure, and good anti-wrinkle ability. These ultrafine fibers with unique capillary structure increase the number and surface area of fibers per unit area, so that the meltblown cloth has good filterability, shielding, heat insulation and oil absorption.

The complete production process of PP melt blown cloth making machine includes raw material mixing, dryer, extrusion, screen changer, metering pump, mold, distribution plate, spinneret, netting and ending winding device. The production of melt-blown cloth is relatively complicated and has high requirement for equipment manufacturing, as well as, reliable service during the whole production process is also indispensable.

Introduction of Spunbond Nonwoven Fabric Production Line

Spunbonded non-woven fabric is used for clothing, medical and sanitary materials.

Our spunbonded non-woven fabric production line is mainly used to produce PP spinning and hot rolling reinforced non-woven fabrics. PP Spunbond hot-rolled non-woven fabrics with different colors, properties and applications are produced with PP as the main raw material, added into color masterbatch and additives such as antioxidant, anti pilling and flame retardant. Our spunbonded non-woven fabric production line can produce S, SS, SSS and other series products by changing different technical configurations to meet the market demand of PP Spunbond Nonwoven Fabrics for different purposes.

Introduction of SMS Spinning Melt Composite Nonwoven Fabric Production Line

This production line is used to produce nonwoven fabrics for medical isolation clothing, surgical clothing, sheets curtain, sanitary napkins, baby diapers, adult incontinence pad and other disposable medical protection and personal health care industry, etc.

SMS spinning melt composite non-woven non-woven fabric is made of spunbond non-woven fabric + melt blown non-woven fabric + spunbond non-woven fabric through three-layer web hot rolling composite. Our company has mastered a full set of one-step SMS spinning melt composite nonwoven production process and technology. The production line adopts high-precision die spinneret, and the products are finer and more uniform, and the fabric texture is more soft, which can greatly meet the needs of different customers

The Application of PP Meltblown Non-woven Fabric Production Line
PP meltblown non-woven fabric can be used in the fields of air, liquid filter materials, face mask materials, thermal insulation materials, oil-absorbing materials etc. With our constant attention to public health, meltblown products become indispensable.

As a plastic extruder machine factory, we can offer high quality hdpe pipe extruder machine for sale, if you are interested, please contact us.

PP Honeycomb Plate Extrusion Line(2023年)

jwell2023 — 2023-03-29T17:19:51+0900

https://www.jwellextruderglobal.com/products/pp-honeycomb-plate-extrusion-line/

We're professional sheet&plate china plastic extruder machine manufacturer with over 25 years experience and have ranked No.1 in the plastic extrusion industry for 11 consecutive years, accumulating rich manufacturing experience and advanced extrusion technology. JWELL exports over 3000 sets high-level plastic extrusion production line to over 120 countries and areas every year. With high-quality equipment quality and sincere after-sales service, we have won the recognition and support of customers at home and abroad.

PP honeycomb plate is a three-layer sandwich plate formed by extrusion. The upper and lower surfaces are thin adhesive layers, and the middle is PP plate with honeycomb structure. PP honeycomb panel can also be formed with double-sided cloth and skin covering at one time, which has the advantages of light weight and high rigidity, non-toxic and environmental protection, shock absorption and cold resistance, sound insulation, moisture-proof and good heat insulation.

The main specifications of PP honeycomb plate that our production line can produce: thickness 2mm-12mm, width 800mm-1300mm. Due to the special internal structure of the PP honeycomb plate, the production requirements of the equipment are also very high. The most important thing is to choose experienced equipment suppliers who can provide complete PP honeycomb plate production line and reliable after-sales service.

Advantages of pp honeycomb board extrusion line
01.
We support customized services according to your practical requirements.

02.
Special designed single screw produced by our own factory, which means we could provide fast and stable maintenance of the screws and barrels.

03.
The transmission system based on Germany technology has the features of high precision, low noise and long service life.

04.
Adopt famous imported inverter, famous brand PLC and screen, easy operation and maintenance.

05.
We combine low energy conservation and high speed production in our extrusion machine.

The Application of PP Honeycomb Plate Extrusion Line
PP honeycomb plates are mainly used in passenger car trunk cover, freight car compartment, trunk partition, wall partition, trunk carpet substrate, side wall decorative panel, ceiling and other interior parts, and various high-strength packaging boxes, etc.

If you have needs to buy a plastic pipe extruder, please leave us a message.

PP Hollow Building Template Extrusion Line(2023年)

jwell2023 — 2023-03-29T17:19:18+0900

https://www.jwellextruderglobal.com/products/pp-hollow-building-template-extrusion-line/

We're professional extruder machine for plastic manufacturer with over 25 years' technical R&D experience and the technology leader in extrusion industry, exporting over 3000 sets complete production line to 120 countries and areas every year. Our PP hollow building template template production line has the advantages of higher output, low energy consumption, good plasticizing, easy operation and stable equipment running.

PP hollow building template is a new type of green environmental protection and recyclable product, which is another new generation product after wood building template, combined steel template, bamboo wood plywood template and all steel large template. It can completely replace the traditional steel template, aluminum template, wood template and square wood, saving energy and environmental protection, and the production cost is low.

JWELL Provides Complete Production Solution for PP Building Template:

1. Pelletizing Process

The quality control of the hollow building template board has high requirements on raw materials, and it is necessary to ensure that the additives and filling materials in the formulation system are evenly dispersed during the extrusion process. We independently developed a high-torque twin-screw high-output filling and modifying granulation equipment and one-step method to complete compounding and extrusion forming, Through the optimized design of the screw elements and combinations of the equipment, while adhering to economy, energy saving and environmental protection, it also ensures that the physical and chemical characteristics of high polymer materials are fully retained during the plasticizing process, so as to obtain board raw materials with stable quality.

2. Extrusion

Through continuous innovation and testing, we have launched the good quality PP building template extrusion line to produce two PP building templates with only one mold at the same time, which not only greatly improves the equipment capacity(900-1000 pcs per day), but also saves energy and ensures high-quality products. The PP hollow building formwork or template produced by our production line has the features of uniform thickness, strong hardness, corrosion resistance, high quality and recyclable using. The fire-proof layers on the surface of the PP building templates produced by our co-extrusion production line meet the requirements of different EUR grades such as VO, V1, V2 and so on.

The unique design of mold, calibration plate, cooling system, temperature system and vacuum system ensures high-speed extrusion, good wear resistance, shaping and easy operation.

Through the design of two-stage combined haul off unit, the smoothness of products can be effectively controlled, and the unqualified products produced by each start-up can be greatly reduced.

Special designed cutting device can minimize the rough edge of the PP building templates, automatic length counting cutting, easy operation based on computer control.

3. PP Profile Extrusion

PP profile is a newly designed polymer material which replace traditional wooden profile. By adopting special extrusion process, PP profile can meet the requirement of nail-holding ability. PP profile can be recycled used, and has the characteristic of water proofing, Mould proof, no deformation, etc. Different from the traditional wooden profile, PP construction board can be installed on PP profiles. The production for this profile is very simple by using single screw extruder or with co-extrusion.

Technical parameter of pp hollow sheet extrusion machine

4. Edging Cutting Process

After a certain period, PP construction building templates may have some shrinking. Therefore need to do the precise edge cutting, so that the diagonal catercorner, balance can meet the construction requirements. Edge cutting machine can be automatic: automatic board loading, and automatic stacking. After stacking, only use the forklift to move the boards away.

5. Waste Recycling and Crushing

PP construction board crusher and washing line is mainly used for crushing wide but thin plastic board products. It has a designed with main shaft and unique feeding hopper, which is easy to feed trays and wide plate products in. Wide products do not need to be cut, which spares the recycling process, saves energy, reduces labor intensity and cost and improves the efficiency of pulverization and recycling.

The Application of PP Hollow Sheet Line
PP building templates are widely used in the construction of residential buildings, office buildings, shopping malls, stations, plants, water conservancy, bridges, tunnels, drainage ditches, retaining walls, pipe corridors, culverts and other construction projects. When doing the installation, except for combination usage with traditional wooden profile, it can also do the combination usage with plastic profile.

The turnover times of plastic building template can reach more than 150 times, and it can be recycled. Large temperature adaptation range, strong specification adaptability. The flatness and finish of the template surface exceed the technical requirements of the existing fair faced concrete template. It has the functions of flame retardancy, corrosion resistance, water resistance and chemical corrosion resistance, and has good mechanical properties and electrical insulation properties. It can meet the requirements of various cuboid, cube, L-shaped and U-shaped building template.

As a plastic extruder machine supplier, we will do our best to meet all the needs of customers.

Plate & Sheet Extrusion Line(2023年)

jwell2023 — 2023-03-29T17:18:49+0900

https://www.jwellextruderglobal.com/products/plate-sheet-extrusion-line/

The full range of plastic sheet and plastic plate extrusion line adopt professional single or twin screws designed and produced by our own sheet extruder machine factory, mature extrusion technology, special designed rollers, high-torque AC motor, imported frequency converter and stable control system, which is particularly suited for the extrusion of thermoforming sheet and has established itself in this industry. We provide full extrusion lines for PP meltblown non-woven fabric, reinforced plastic sheet, SPC floor, XPE, IXPE foam sheet, PVC thick plate, PP, PET, PLA, PC, PMMA, GPPS, ABS, HIPS, PVC sheet, TPO, PVC, EVA, HDPE waterproof geomembrane sheet, PEEK, PPS plate, new material composite sheet, etc.

Plate & Sheet Extrusion Line Lists

PET PLA China Plastic Sheet Extruder
SPC Floor Extrusion Line
Aluminum Plastic Composite Plate Extrusion Line
PC PP PE Plastic Hollow Sheet Extrusion Line
PP Meltblown Non-woven Fabric Production Line
CFRTP Material Extrusion Line
XPE IXPE Foaming Sheet Extrusion Line
PVC, PE, PP, PVDF Thick Plate Extrusion Line
PP PS Environmental Sheet Extrusion Line
PP Hollow Building Template Extrusion Line
PC PMMA GPPS Sheet & Plate Extrusion Line
PP Honeycomb Plate Extrusion Line
PC PMMA Optic Sheet Extrusion Line
ABS HIPS PMMA Refrigerator Plate and Sanitaryware Plate Extrusion Line

What is Plastic Sheet Extrusion Production Process?
The complete sheet production process includes: mixing raw materials, feeding, screw plasticization, filtration, extrusion, roller forming, cooling, traction and cutting.

What Are the Key Points in the Sheet Extrusion Process?
High quality sheet products must ensure smooth and flat surface, uniform thickness, and high-quality physical and chemical characteristics.

Precise temperature and air pressure control system could guarantee uniform sheet thickness and smooth surface. Professional screw sturcture determines the quality of raw material plasticization. Finally, stable and high-quality sheet production line ensures reliable and long-term production.

What Are the Materials Used in Sheet Extruder Machine?
Our company has been focused on various plastic plate and sheet extrusion machines for over 25 years. We provide full production line for PVC, HDPE, PC, PP, SPC, PLA, PS, PET, PMMA, HIPS, ABS, TPO, EVA, PE sheets with good quality and high production capacity. If you need more details of plastic plate and sheet, please contact us at any time.

As a plastic extruder supplier, we can offer kinds of related products for sale, if you have needs, please contact us.

PLA Biodegradable Straw Extrusion Line(2023年)

jwell2023 — 2023-03-29T17:18:22+0900

https://www.jwellextruderglobal.com/products/pla-biodegradable-straw-extrusion-line/

As a plastic extrusion line supplier, we have been focused on plastic pipe extrusion line technology since 1997, accumulating rich manufacture experience, continuously improving equipment performance. Our PLA biodegradable drinking straw extrusion machines have the advantages of high speed, stable production, easy operation, long service time and reliable after-sales service. Also, we have enough resource that over 500 technical engineers and 200 experienced operators will help and support your business.

Advantages of PLA Straw Making Machine
01.
Adopt high speed hard gearbox, low noise and energy-saving cooling fan.

02.
Special designed screw and mould ensures stable plasticization and smooth production.

03.
Bran-new 304 stainless steel tank, more durable.

04.
Accurate temperature and vacuum control system guarantee high quality straw.

05.
Various alarms are set to protect the whole drinking straw making machine line during pipe production process.

The Application of PLA Biodegradable Straw Extrusion Line
Our drinking straw production machine is suitable to produce various straws with different material, like PET, PP, PLA, etc.

Pipe Extrusion Line(2023年)

jwell2023 — 2023-03-29T17:17:50+0900

https://www.jwellextruderglobal.com/products/pipe-extrusion-line/

As a pipe extruder manufacturer, Jwell offers different types pipe extrusion machine to meet production for various pipes with different applications, such as PVC pipe, HDPE pipe, PP-R pipe, RTP pipe, PLA degradable straw, Electrical conduit pipe, Corrugated pipe, Steel reinforced spiral pipe, Silicon core pipe, Medical tube, Hollow pipe, Threading pipe, Communication pipe, Multilayer pipe and Technical pipe, etc.

All series pipe extrusion lines adopt high-efficient extruder to ensure higher output, better plasticizing, lower energy consumption and stable production. Based on Jwell special screw structure and advanced extrusion technology, our high quality pipe extrusion machines are suitable for processing many different polymers to meet customers requirements.

We choose Intelligent SIEMENS PLC control system, ABB inverter, high-end transmission system and precision electrical components, which can highly improve the equipment performance and make the operation process very easy.

Pipe Extrusion Line Lists
PVC Pipe Extrusion Line
UPVC CPVC Water Supply Drainage Pipe Extrusion Line
PVC Electrical Conduit Pipe Extrusion Line
PVC Silent Water Drainage Pipe Extrusion Line
PVC Double-cavity/Four-cavity Pipe Extrusion Line
Three-Layer PVC Pipe Co-extrusion Line
PVC Communication Threading Pipe Extrusion Line
PVC Medical Tube Extrusion Line
PVC Hollow Winding Pipe Extrusion Line

HD PE Pipe Extrusion Line
Large Diameter 800-2000mm HDPE Water Gas Supply Pipe Extrusion Line
High Quality 63-630mm PE Pipe Extrusion Line
PE Steel Reinforced Spiral Pipe Extrusion Line
PE Insulation Pipe Extrusion Line
High Speed and Energy Saving HDPE Pipe Extrusion Line
Multi-layer HDPE Solid Wall Pipe Co-extrusion Line
MPP PE Electrical Conduit Pipe Extrusion Line
PE, PP, ABS Film Roll Core Tube Extrusion Line

Corrugated Pipe Extrusion Line
Horizontal Double Wall Corrugated Pipe Extrusion Line
Vertical Double Wall Corrugated Pipe Extrusion Line

Special Plastic Pipe Extrusion Line
PP-R, PE-RT, PE-X Cool & Hot Water Small Pipe Extrusion Line
High Pressure RTP Twisted Composite Pipe Extrusion Line
Silicon Core Pipe Extrusion Line
3D Printer Filament Extrusion Line
PLA Biodegradable Straw Extrusion Line
Fiber Glass PPR Pipe Co-extrusion Line
PP Pipe Extrusion Line

Common VS Jwell Pipe Extrusion Machine
Jwell Pipe Extrusion Machine

Jwell China Plastic Pipe Extrusion Machine
We are a 25-year manufacturing vendor with vertical set-up, which means we have a great control of supply chain and we are cost-effective. There're over 3000 employees working at Jwell so that we can offer reliable, professional and sustainable service for customers at any time. As a plastic extrusion machine supplier, Jwell has specialized in plastic extrusion technology for over 25 years with rich experience, driving plastic extrusion industry keep forward. Our extrusion line has the advantages of good melt homogeneity, better plasticization, higher output and long service time.

Common China Plastic Pipe Extruder
Most manufacturers often change component suppliers or take much time to order spare parts. They adopt outdated technical specification for extrusion machine without reducing energy consumption or improve production capacity. Many our customers who used these old machines said although the price of these pipe machines are very low, they cannot be used for a long time. Also, some manufacturers can't offer reliable service, because they don't have enough resource to support it.

Factors Affecting Extrusion Machine Production
Screw structure
Different screw structures directly affect the plasticization of plastic raw materials and the quality and output of final products.

Transmission system
Provide the screw with appropriate speed range, stable speed and uniform torque, and be able to withstand the huge screw axial force generated in the production process.

Electronic control system
Great electronic control system can ensure smooth production and affects performance of heating, cooling and pressure system.

Heating and Cooling system
Accurate and uniform heating and cooling system play an important role in screw extrusion and calibration, then affects thickness and surface of final products.

What is Pipe Extrusion Process?
There are six steps during pipe extrusion process. Firstly, mix material, then extrusion part, pipe calibration, cooling, haul off, cutting. The following are the causes and solutions of some problems during pipe production process.

Corrugation on pipe surface
Vibration
Pit on surface
Nonuniform wall thickness
Corrugation on pipe surface

Insufficient cooling: It is necessary to increase the water inlet of the sizing sleeve or increase the spacing between the die and the sizing sleeve.

PET PLA Sheet Extrusion Line(2023年)

jwell2023 — 2023-03-29T17:17:18+0900

https://www.jwellextruderglobal.com/products/pet-pla-sheet-extrusion-line/

We are professional at manufacturing complete pla sheet extrusion line and china pet sheet extrusion line with over 25 years' rich experience, highly improving production efficiency and extrusion technology. The whole sheet production line adopts good quality computer operation system, special designed screw produced by our own company, high precision mold and professional pressure and temperature control system.

Twin Screw Dryer-free Vented China PET Sheet Extrusion Machine

The twin-screw non drying exhaust type PET sheet production line developed by our company is characterized by low energy consumption, simple operation and convenient maintenance. Its unique screw combination structure effectively reduces the viscosity of PET resin. The specially designed roller structure improves the cooling efficiency and improves the productivity and sheet quality. The multi-component feeding device can effectively control the proportion of new materials, recycled materials and color masterbatch. The produced sheets can be used in the fields of printing, food packaging and medical packaging, etc.

PLA Sheet Extrusion Machine

PLA is a polymer material prepared by polymerization of lactic acid or lactide, a dimer of lactic acid. Lactic acid is usually fermented from corn starch or sugarcane. At present, there are also some studies trying to prepare lactic acid from cheap cash crops such as cassava and sugar beet.

PLA sheet is biodegradable, with high surface gloss, high transparency, comfortable tactile sensation, bacteria resistance, flame retardancy and UV resistance. PLA sheet can be used for hard packaging of fruits, vegetables and food, and also for packaging of other living goods. After thermoforming, PLA extruded sheet has been applied in packaging of fresh food, salad, food and so on. At present, it has occupied a certain market share in Europe, Japan and China.

PET, PLA Foam Sheet Extrusion Line

PET, PLA sheet foam production line, widely used in building insulation, sandwich structure material core material, sports instruments, fan blades, ships, aerospace, plastic, printing, packaging and other fields. PET foam molding has the following advantages: good barrier properties to oxygen, carbon dioxide and water vapor, excellent wear resistance and surface retardation; good thermal stability, its maximum working temperature is about 200 degrees.

PP foam sheet is mainly used in folders in the field of stationery, partitions in the field of packaging, etc., as well as shading panels, sound insulation panels, luggage racks, interior trim parts, covers, boxes, etc. in the field of automotive interiors.

Small Lab Extrusion Machine

The small testing extrusion lines provided by JWELL can meet the demands of extrusion, casting, sheet production, stretching and composite processing test. These production lines are used by a lot of Chemical Colleges and Plastics Research Institutes to process and test the performance of the polymer material. It is also for developing new products or making samples and other application in plastic factory's research department. Our exclusive experimental lab extrusion machines are well recognized by domestic and overseas customers.

PET, PLA, PP Sheet Production Process

Feeding System:

The raw materials, formula materials, etc. can be accurately measured by the weighing system and then enter the extruder. The degree of automation is high, and the stability of product quality is improved.

Extrusion System:

The use of energy-saving motors and ultra-high torque gearboxes, combined with the "Jinhailuo" high-efficiency screw designed by Jwell's independent patent, significantly improves the energy efficiency ratio of the extruder. Large filter area, hydraulic screen change without stopping. The die opening and flow rate are adjustable, and the die width can also be adjusted online.

Foaming Device:

Using carbon dioxide physical gas injection, environmental protection and no harm to the human body.

Calender Roller:

Helical and horizontal three-roller calender, easy to operate. The mirror surface roller, with special internal spiral cross-flow channel design, has good heat exchange efficiency, and the temperature difference of the roller surface is ≤±1℃, which provides stable shaping and cooling capacity for large output extrusion.

Auto Winder:

The automatic integration of winding and cutting transverse tension control, with high precision pulse meter.

Electrical Control System:

The whole line is controlled by PLC system, which can monitor and record the operation of the equipment in real time, diagnose and debug programs remotely, and connect to the MES system.

The Application of PET PLA Sheet Extrusion Line
The PET sheet can be used in medical packaging fields, such as clinical surgical equipment packaging, pharmaceutical packaging, turnover tray, orthopaedic and ophthalmic equipment packaging. PLA degradable sheet is mainly used in food packaging.

As a pet sheet extrusion line factory, we will do our best to meet all the needs of customers.

More kinds of plastic extruder machine china, please visit our website.