Green Line Laser Alignment with 110 Degree Glass Lens

High uniformity beam 635nm red line laser module(2023年)

lasermodule — 2023-04-14T21:01:58+0900

When users are trying to make extremely clear and fine line alignment, it might not be easy to reach with any manual line drawing or printing work, but making even more efficient job with a high purity light emitting device of 635nm red line laser module. In various industrial precise line measuring work fields, being made with an import 635nm red laser diode and qualified separate crystal lens with wide fan angles, it is always working well with high uniformity and high straightness red line projection. Only if it gets proper installation and adjustment to correct position, without any relying on any manual labor force input, it makes sure of high level of accuracy and high efficiency line generation for a lot of application fields.https://www.berlinlasers.com/635nm-red-line-laser-module-non-gaussian-distribution
The usual use of non Gaussian beam 635nm red line laser module is in need to work for quite long time, and also having to maintain highly stable and reliable performance in continuous use. It is applying an import 635nm red laser diode and metal heat sink cooling system. It always enables at least 40% improvement of laser beam stability and highly reliable red line projection within long lasting work time of 8 to 10 hours. In addition, when it gets wide range output power of 5mW to 100mW, configured with different dimension of 16mm and 26mm diameter tube design, it just leaves enough space for tube cooling down, and achieves high level of accuracy red line generation onto various working surfaces.https://www.berlinlasers.com/oem-lab-lasers/laser-line-generator
On occasion that it applies qualified separate crystal lens, after a series of beam stability and aging preventing test up to 24 hours and special use of a glass window inside metal housing tube, this 635nm red line laser module is performing well with high uniformity distribution red laser light. When it gets low laser beam divergence and special TEM00 laser beam mode, together with highly uniform red line projection up to 85%, it obtains super fine line source of only 0.3mm at 10cm, and 1mm to 2mm at 2 meters. Until the time it is making long lasting line projection within 25 meters, it still makes sure of high level of accuracy line projection for laser cutting, sand milling, lumber machine, textile garment processing and high tech work etc.
Within freely installed distance of 3 meters, whatever kind of working surface it is pointing, this 635nm non Gaussian beam red line laser module makes sure of the most convenient installation and the easiest reaching of red line projection in distance. It is making good job for high precision line measurement for both industrial and high tech work fields. On condition that users are paying high attention to powerful red laser radiation and thermal energy hurt to eyes, after correct wearing of laser safety goggles and avoiding eye exposure to beam aperture, it achieves easy and secured line alignment in distance perfectly.https://www.berlinlasers.com/

laser module(2023年)

lasermodule — 2023-03-06T16:15:39+0900

If users are looking for an easy operating and highly clear dot measurement at different work distances, it should be a quite challenge job for users to get dot aligning accuracy as expected. At the same time, after constant technical innovation of 532nm green DPSS laser system, and qualified glass coated lens, it is being made into a quite practically used device of 532nm green laser diode module. Any time it gets constant power source supply and easy mounting onto any industrial device or equipment, not any longer relying on any manual labor force input, this green dot laser always assures the lowest price and the most reliable green dot projection for all application fields.https://www.berlinlasers.com/532nm-green-laser-diode-module
No matter dot measuring work is processing at close or long distance, this 532nm green laser diode module always gets wide range output power of 5mW to 100mW. It is projecting the most visible and the brightest green laser light from a middle wavelength of 532nm green DPSS laser system. In practical dot measuring work, owing to its basic use of a metal heat sink cooling system configured with highly durable metal housing tube, whatever kind of working surface it is pointing, this 532nm green dot laser alignment is generating highly stable green laser beam, and highly clear green dot projection within the maximum work distance of 25 meters and other high lighting working occasion etc.https://www.berlinlasers.com/oem-lab-lasers/laser-diode-modules
After easy connects with an AC/DC adapter, not spending extra time on battery change, 532nm green laser diode module is keeping work with constant green laser beam emission. It is operating easy and quick, which also getting no control or limitation of long distance, high height and other complex working environments etc. In special need of clear and accurate dot measurement onto multiple working surfaces, it is a necessity to make basic measurement and experiment of line length, line fineness and work distance.
When green laser diode module gets correct use of output power and freely adjusted laser beam focus, within freely installed distance of 3 meters, it makes sure of easy reaching, long lasting dot projection in distance. It also allows freely adjusted laser beam focus and dot emitting direction within three dimensions. Under operation of a high power green dot laser up to 30mW to 100mW, it is also a necessity to wear correct laser safety goggles, after high attention to powerful green laser radiation and thermal energy hurt to human eyes, it always assures the most secured and the most precise dot generation for both industrial and high tech work fields effectively.https://www.berlinlasers.com/

adjustable focus infrared dot laser(2022年)

lasermodule — 2022-07-27T20:08:26+0900

What is the best solution for users to make clear and accurate enough dot alignment for all night version illumination fields? It is not easy to reach with those of visible laser device or other manual dot projecting tool. At the same time, laser tech engineer is also making continuous technical innovation of 808nm infrared laser diode tech and qualified glass coated lens, it is being made into a quite practically used device of 808nm infrared laser diode module. In occasion that compact structure made infrared dot laser makes proper installation and adjustment to correct position, it always makes good direction and quick indicating IR dot emission onto various working surfaces.https://www.berlinlasers.com/808nm-infrared-laser-diode-module
The usual use of a 808nm infrared laser diode module is continuing for quite long time. For the most important of all, it should be designed with good thermal emitting. The adoption of import 808nm infrared laser diode is cooperating with a metal heat sink cooling system. When it gets even better thermal emitting than formal IR laser pointer, in process of long lasting IR dot aligning work within 8 to 10 hours, it is able to work with superior nice laser light cycling use, and no decay light infrared reference dot projection for a lot of night version application fields, including infrared laser sight, military targeting, night hunting, surveillance, intelligence system and lab experiment etc.https://www.berlinlasers.com/oem-lab-lasers/laser-diode-modules
According to the use of an external AC/DC adapter, without spending extra time on alkaline battery power source, this 808nm infrared laser diode module is keeping work with continuous infrared laser beam and infrared reference dot projection from beam aperture. It is getting special use of extending electric wires for both infrared dot laser and DC power supply. Within the maximum installed distance of 3 meters, it always makes easy and quick infrared reference dot projection, but also getting no barrier of long distance, high height and other hard reaching places etc.
For the most important of all, once there is increasing temperature and serious electric current impact, once 808nm 100mW infrared laser diode module is working within the maximum work time of 8 to10 hours per day, it is working well with superior nice laser light cycling use, and highly clear and no decay light IR dot indication in long time use. According to correct use of output power and proper adjustment of both laser beam focus and IR dot emitting direction within three dimensions, 808nm infrared alignment laser gets the most concentrated infrared laser light, and increasing accuracy infrared reference dot projection in distance. When users are paying high attention to laser safety issue and wearing proper infrared laser safety goggles, without any eye exposure to laser beam aperture, it just makes easy and high security dot measurement constantly.https://www.berlinlasers.com/

high precision infrared line alignment(2022年)

lasermodule — 2022-03-08T16:45:18+0900

In order to make precise and fine enough line generation under all kinds of night version fields, not the same as any manual line drawing or printing device, it would be much more efficient work for user to apply a long wavelength made device of 980nm infrared line laser module. Not the same as any visible laser device, when it is projecting invisible infrared laser beam and IR reference line, it should only be operating as an accessory part. When compact size tube made infrared laser line generator gets proper installation and adjustment to correct position, not limited by manual labor force input, it always makes sure of increasing accuracy and fineness IR line alignment constantly.https://www.berlinlasers.com/uniform-980nm-infrared-line-laser-module
The advanced use of AC/DC adapter has just supported 980nm infrared line laser module with continuous infrared laser beam and infrared reference line projection from beam aperture. It is accepting wide range electric current of 100V to 240V. In occasion that it makes correct use of operating voltage of 5V, 9V 1000mW DC power supply, it is easily getting highly intense infrared laser beam emission at quite long work distance. It is not only making clear IR line alignment at close distance, high power IR laser line generator up to 300mW to 500mW also makes clear and fine infrared line projection at long work distance of 100 to 1000 meters.https://www.berlinlasers.com/oem-lab-lasers/laser-line-generator
According to special use of a separate crystal lens within 10 to 93 degree, whatever kind of working surface it is pointing, this 980nm infrared line laser module is performing well with non Gaussian distribution infrared laser beam emission. It is performing well with the same line brightness from middle part towards both ends. In a large variety o night version IR line projecting work fields, only after its correct use of output power and optic lens degree, this infrared laser line generator just makes high precision IR line alignment for military targeting, intelligence system, laser medical therapy, and scientific research work etc.
Whatever kind of working surface it is pointing, with the assistance of laser alignment mounting bracket and special use of extending electric wires, this 980nm infrared line laser module always allows freely installed distance of 3 meters, and the most convenient IR line generation onto any vertical or horizontal surface. When this infrared alignment laser gets proper adjustment of both laser beam focus and IR line projecting direction within three dimensions, only after its correct wearing of laser safety goggles and avoiding eye exposure to beam aperture, it always makes highly secured and fine line alignment at various work distances perfectly.https://www.berlinlasers.com/

alignment(2021年)

lasermodule — 2021-12-13T16:40:19+0900

What is an easy job to make highly clear cross line measurement in long time use? It is not easy to reach with a simple manual or mechanical cross line measuring device, but making good job after the use of a high intensity beam emitting tool of economy red cross laser alignment. It is projecting intense red laser light directly from an inner 650nm red laser diode. On basis of the best use of qualified glass coated lens and cooling system, after configuring with durable metal housing tube, this compact structure made red laser module always assures the most intense red laser light, and the most complex two perpendicular red cross line source emission at various work distances.https://www.berlinlasers.com/economy-red-cross-projecting-laser-alignment
Owing to the use of an external AC/DC adapter, without spending extra time on alkaline battery power source change, this economy red cross laser alignment is leaving enough space for tube cooling down, but also achieving continuous red laser beam and red cross line source emission from beam aperture. It is maintaining highly stable red cross line source emission within 8 to 10 hours. In addition, under operation with extending electric wires for both 650nm red laser module and DC power supply, it enables freely installed distance of 3 meters and highly stable and clear red vertical and horizontal lines generation in continuous use.https://www.berlinlasers.com/alignment-laser
According to the use of high quality glass coated lens, this economy red cross laser alignment emits the most complex two perpendicular red lines with accurate 90 degrees. It is also performing with highly clear and stable cross line source, without laser light decay or blur in long time use. In front of beam aperture part, owing to its special use of glass window, the tube of 650nm red laser module gets perfect protection from any harsh working occasion of moisture or dust. When it makes constant red cross line projection by skilled users or professionals, it is always performing with highly clear red cross line source projection for a lot of application fields, including laser alignment for screen printing system, heat transfer machine, military targeting and other high tech work fields etc.
No matter what output power it is selecting, economy red cross laser alignment gets wide range output power of 5mW to 10mW. It gets perfect protection of itself from any increasing temperature and serious electric current impact. When it makes constant red cross line projection, within continuous work time of 8 to 10 hours, this red alignment laser gets good laser tube cooling down and up to 85% laser beam stability in continuous use. According to high attention to thermal energy hurt to human eyes and proper wearing of 650nm wavelength preventing laser safety goggles, without any eye exposure to beam aperture, high power red cross laser makes sure of no danger and no mistake measurement in all occasions perfectly.https://www.berlinlasers.com/

Good Sale 980nm Glass Coated Lens Infrared Laser Line Generator(2021年)

lasermodule — 2021-10-15T20:36:23+0900

Whenever line measuring work is processing under all night version fields, it is not easy to reach with any visible laser line module or mechanical line aligning tool. Nothing can be visible to human eyes, the genuine use of 980nm infrared laser line generator always makes sure of easy and clear IR line indication onto any raw material surface. Being made with qualified glass coated lens with different fan angles and good use of electric power source, this 980n infrared laser module always makes easy installation, and continuous IR reference line projection onto various working surfaces.http://www.berlinlasers.com/980nm-glass-lens-infrared-laser-line-generator
After the use of an external AC/DC adapter, 980nm infrared laser line generator within 100mW to 500mW just makes sure of constant infrared laser beam and infrared reference line projection from beam aperture. Being made with extending electric wires for both 980nm infrared laser module and DC power supply, within the maximum installed distance of 3 meters, it just makes sure of the most convenient installation, and easy IR line indication onto any raw material surface. When there is increasing temperature and serious electric current impact in continuous IR line alignment work, this 980nm infrared laser module still gets perfect protection of itself, and still makes sure of highly stable and reliable IR line alignment in long time use.http://www.berlinlasers.com/oem-lab-lasers/laser-line-generator
Being made with a qualified glass coated lens with different fan angles, 980nm infrared laser line generator is not only projecting high transmittance infrared laser light emission, but also generating high linear quality infrared reference line from beam aperture. It is passing through up to 24 hours aging preventing test and beam stability tests. The genuine IR laser line alignment allows constant work within 8 to 10 hours, after proper use by skilled users or professionals, this infrared line laser just achieves good performance.
In a lot of night version precise line aligning work fields, after basic measurement and experiment of technical data, 980nm glass coated lens infrared laser line generator enables correct use of optic lens degree, and assures highly clear and fine IR line alignment at great distance of more than 50 meters. When it gets easy mounting onto other night version device, after proper adjustment of both laser line fineness and line projecting direction within three dimensions, this infrared alignment laser gets the most concentrated IR laser light and the finest IR line alignment. Only if users are paying high attention to laser safety issue and wearing correct laser safety goggles, it brings users no barrier and no mistake line alignment perfectly. http://www.berlinlasers.com/

green line laser alignment(2021年)

lasermodule — 2021-06-18T17:05:09+0900

Have you ever tried an easy operating and quick positioning line measuring tool? It is not able to rely on simple manual line printing or line drawing works, but making easy job after the use of a 532nm green line laser alignment. When it is trying to make continuous line projection, it just gets constant power source from DC power supply and makes good use of thermal emitting system. In various industrial and high tech line positioning work fields, only if it makes correct use of optic lens degree and output power, after its proper installation and adjustment, this green laser line generator just makes easy and highly fine green reference line projection at various work distances.http://www.berlinlasers.com/532nm-green-line-projecting-laser-alignment
The usual line measuring work with 532nm green line laser alignment should be working onto various working surface, and projecting various line lengths and line finenesses. The special use of glass coated lens and separate crystal lens are getting better performance than formal plastic coated lens. Either it is pointing at great distance or long distance, it just keeps work with highly clear line indication, without any appearance of laser light decay or blur in continuous use. According to basic measurement and experiment of technical data, after correct use of output power and optic lens, this green laser line generator makes highly clear and fine line generation at various work distances effectively.http://www.berlinlasers.com/alignment-laser
After the use of the most durable aircraft used aluminum alloy housing tube, even though green line laser alignment is pointing under other harsh working occasion, such as mechanical moving or shocking, it is still not be effecting at all. Under quite low or high temperature, it is always performing with highly clear and bright green laser beam emission, and clear green reference line projection. This compact size and durable structure made 532nm green laser module just makes quite satisfied line positioning results for laser cutting, sand milling, textile garment processing, and other high tech line positioning works etc.
Whatever kind of working surface it is pointing, without any barrier caused by long distance, high height and other complex working environments, 532nm green line laser alignment just makes easy and no barrier line indication onto any vertical or horizontal surface. Only if it makes proper installation and adjustment of laser beam focus, this industrial alignment laser just enables the finest green reference line projection. When it gets high power up to 50mW to 100mW, besides its operation at great distance, it is also a key issue to wear proper laser safety glasses until achieving safe and clear line measurement constantly.http://www.berlinlasers.com/

forest green cross laser alignment(2021年)

lasermodule — 2021-04-23T12:40:57+0900

If users are not able to make immediate and clear enough cross line measurement, no matter it is pointing at close distance or long distance, it is not easy to work with simple manual cross line drawing works. After constant technical innovation of 515nm green laser diode tech and qualified glass coated lens with different fan angles, it is being made into a quite practically used device of 515nm forest green cross laser alignment. When it gets constant power source from DC power supply, after correct use of glass coated lens degree and proper installation, it just makes sure of highly clear and accurate green cross line laser source emission at various work distances.http://www.berlinlasers.com/alignment-laser
The usual cross line measurement with 515nm forest green cross laser alignment is processing in various working environments. It applies import 515nm green laser diode as beam emitting source. It gets a bit less brightness green laser light than 532nm green DPSS laser system. However, under operation with the same configured metal heat sink cooling system inside durable aircraft used aluminum alloy housing tube, this green laser line generator gets increasing laser beam stability, and no decay light forest green cross line source emission in continuous use.http://www.berlinlasers.com/515nm-green-cross-line-laser-module
Owing to the use of qualified glass coated lens with different fan angles, after special use of glass window in front of laser beam aperture, this 515nm forest green cross laser alignment is keeping work with high transmittance forest green laser light emission. In addition, after its operation with different fan angles of 10, 15 and 110 degree, this cross line laser module is projecting various cross line lengths and finenesses. It is a necessity to make basic measurement and experiment of technical data, after correct selection of output power and optic lens degree, it just makes the most precise two perpendicular lines with accurate 90 degrees at long distance.http://www.berlinlasers.com/
According to the use of 16mm and 26mm diameter aluminum alloy housing tube, and extending electric wires for both 515nm forest green cross laser alignment and DC power supply, it enables the maximum installed distance of 3 meters, and convenient forest green cross line source onto various working surfaces. This industrial alignment laser allows quite easy screw of adjustable focus optic lens, within the maximum installed distance of 25 meters, it makes sure of precise and fine enough green cross line source in use. Under high attention to potential thermal energy hurt to eyes and correct wearing of laser safety glasses, it makes sure of highly secured and quick cross line generation in all occasions effectively.http://www.berlinlasers.com/515nm-forest-green-cross-laser-alignment

making high precision dot alignment(2021年)

lasermodule — 2021-03-21T22:00:34+0900

In various types of clear and accurate enough dot alignment, either close distance or long distance, it is never a hard job after the selection of a quite practically used device, such as the sue of a 50mW 650nm red laser diode module. It is just performing with the same brightness red laser beam emission from inner laser diode as a red laser pointer. However, this red dot laser gets advanced equipment with cooling system inside durable metal housing tube, it just achieves superior nice thermal emitting and extremely stable and clear red dot alignment in long time use.http://www.berlinlasers.com/650nm-red-laser-diode-module
When dot alignment is processing at various working occasions, even though it is not easy to reach with a simple laser pointer, however, it would be much better solution to make use of a 50mW 605nm red laser diode module. It gets formal brightness red laser light emission directly from 650nm red laser diode. Although it is not as bright as 635nm red laser, however, owing to mass production of 650nm red laser diode and long developing history, this dot laser alignment is not only assuring highly stable performance, but also getting quite low production cost for all precise device manufacturing works.http://www.berlinlasers.com/oem-lab-lasers/laser-diode-modules
Under the use of a qualified glass coated lens, owing to its strict laser beam stability tests up to 24 hours, this 50mW 650nm red laser diode module is just achieving superior nice laser light cycling use, and extremely clear red dot indication in continuous use. When it gets quite special use of glass window, even though it is pointing under moisture or dust, this rd dot laser alignment is still maintaining good performance, and no decay light dot measurement for both long distance and long time use. It should also avoid work under sunlight, thus it makes quite satisfied dot measurement within quite long distance of 25 meters and other formal lighting occasions.http://www.berlinlasers.com/alignment-laser
Whatever kind of working surface it is pointing, always without any limitation of long distance, high height and other complex working environments, 50mW 650nm red laser diode module makes easy and quick dot indication. It generates noncontact and no track red reference dot, thus providing the best red dot aligning source for various industrial and high tech dot measuring works. According to quite easy screw of adjustable focus optic lens and proper installation onto other machine or device, only if users are wearing correct laser safety goggles, high power red dot laser makes sure of highly secured and quick dot alignment constantly.http://www.berlinlasers.com/