Shenzhen TitanFlying Technology Co., Ltd

T1-10L Naza Agriculture Drone For Spraying Fertilizer And Pesticides (2017)(2021年)

szttfuav — 2021-12-01T11:25:06+0900

http://www.szttfuav.com/professional-drone/agriculture-spraying-drone-t1-10l-naza.html

The powerful propulsion system of T1-10L Naza Agriculture Drone allows the aircraft to carry up to 10L of liquid payload, including pesticides and fertilizers, and can precisely adjust the amount of pesticides or fertilizers to avoid pollution and save operating costs.
Agriculture Drone Spraying T1-10L Naza

T1 series multispectral drone, specially designed for agricultural pesticide drone spraying, integrated advanced depth customization flight controller, efficient spray system, portable folding fuselage and simple professional remote control to provide users with efficient, safe and convenient plant protection service with low drone fertilizer sprayer cost.

T1-10L Naza is one of our T1 pesticides spraying drones. This agriculture quadcopter not only has all advantages of T1 series, but also is more convenient. With pluggable design of water tank and battery, operators can change the tank in 3 seconds and the battery in 5 seconds. Operation efficiency can be improved by 40 percent.

Design Concept: not only to ensure the quality and reliability of the drone for fertilizer spraying, but also to ensure the effect of spraying and flight endurance.
Feature of Pesticide Sprayer Drone
1. Imported nozzle from US, to ensure the atomization effect.
2. Foldable arm, more stable and more convenient to transport.
3. High-effective motors, low sound, low heat, fast response.
4. Imported Carbon fiber from Toray JP, with high intensity. Propeller made of Nylon carbon, which is more durable than traditional material.
5. The pesticide fertilizer spraying drone can be connected to Smartphone ground station. Real time broadcast, route planning, UAV data remind.
6. Varieties of operating modes, to adapt all kinds of terrain.
7. The uniting of the speed and flow makes spraying more accurate

Function of Agriculture Pesticide Spray Drone
1. Foldable structure
2. High efficient spraying system
3. Regional-planning mode
4. Break point continue to spray
5. Dose monitor
6. Blank box

Aircraft Frame
Dimension1300*1300*540 mm（arm unfolded, without propellers）
880*7600 mm（arm folded, without propellers）
Diagonal Wheelbase1300 mm
Flight Parameters
Total Weight10.5 kg（without battery） 23.5 kg（with battery, Full Loaded）
Standard Take-off Weight23.5 kg
Max Take-off Weight25 kg
Hovering Time10 min （23.5kg take-off weight）*
23 min （13.5kg take-off weight） *
Max Operating Speed8 m/s *
Max Flying Speed10 m/s *
Recommended Operating Temperature-10℃~40℃
Spray System
Liquid Tank Volume10 L
Number of Nozzle4
Spraying Span3.5-4m
Theoretical Operating Efficiency200,000㎡/day (8hs, 6 sets of batteries)
Max Spraying Speed1.6L / min
Ground Controller
Max Transmission Range1000 m (Unobstructed, Free of Interference)**

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing. We provide drone spraying pesticide, drone sprayer, etc.

Agriculture Drone(2021年)

szttfuav — 2021-12-01T11:24:46+0900

http://www.szttfuav.com/professional-drone/agriculture-drone/

UAV use in agriculture have functions such as pollination, spraying, identification, and monitoring. Compared with traditional artificial plant protection operations, best drones for agriculture have the advantages of high efficiency and low cost, which are conducive to standardized agricultural production and are important for promoting agricultural development.

Types of UAV Agriculture Drones For Sale
T1-10L Black Hawk Drone UAV
T1-10L Nova Agriculture Drone Spraying
Hybrid Drone TP416
T1-10L Naza Agriculture Drone For Spraying Fertilizer And Pesticides (2017)
T1-10L Naza Multispectral Camera Agriculture Drone (2018)
T1-16L UAV Farming AG Drone
T1-24L Precision Agriculture Drones
UAV Use in Agriculture
Using agriculture quadcopter for agriculture is a hot topic these days, and for good reason. These unmanned aerial vehicles (UAVs), as they are sometimes called, are rapidly becoming a core tool in a farmer's precision equipment mix.

Today's farmers have to deal with increasingly complex concerns. Issues such as water – both quality and quantity, climate change, glyphosate-resistant weeds, soil quality, uncertain commodity prices, and increasing input prices to name a few.

Growers are turning to high-tech tools, precision agriculture is a farming management concept that uses drones for agriculture to measure, observe, and respond to variability found in crops.

Often under the banner of precision agriculture, to respond to and mitigate these and other concerns. Precision agriculture divides a field into zones that can be individually managed with a range of GPS-equipped precision machinery such as spray drone for sale. Technology enables farmers to collect, store, combine and analyze the layers of data that drive precision nutrient and irrigation management.

There are a variety of sources a farmer can use to build these data layers. Yield monitors, soil sample results, moisture and nutrient sensors, and weather feeds are all useful data sources. In addition to these historical data sets, new technologies, like drones, can provide a view of the current condition of the in-field crop.

T1 agricultural drones for sale have been changing the face of farming and cultivation heavily the past 3-5 years, and completely changing the way that many farmers and other entities go about their business.

As weather conditions become more intense, hurricanes do damage, and other very important elements such as drought and pesticide use require farmers to make very important decisions, T1 for sale are so powerful and innovative that they can ease the burden a bit.

T1 ag drones for sale rely on its ability to actually affect the crops by applying fertilizer, pesticides or herbicides from the air with robotic perfection.
FAQ of Agricultural UAV
What Applications are the Ag Drones for Sale Mainly Used For?
Plant protection operations, forestry monitoring, crop pollination, and herd positioning.
What is the Power System of UAV Use in Agriculture?
What are the Advantages and Characteristics of UAV Application in Agriculture？
Is TTF Agricultural Drone Spraying Easy to Operate?
How to Properly Maintain Battery Life of Agriculture Spraying Drone?

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing.

Racing Drone Parts Overview(2021年)

szttfuav — 2021-12-01T11:24:03+0900

http://www.szttfuav.com/news/racing-drone-parts-overview.html

RC fpv kit are critical to the smooth and safe flight of drones. Knowing the knowledge of racing drone parts will not only enhance your confidence in drone flight, but also will make it easier to replace and upgrade your racing drone parts while regularly checking your racing drone parts.

Racing drone parts - Quick Overview
1. Propeller
Generally speaking, most of the drones on the market have their propellers on the top. The propellers push the air downwards like a propeller to generate lift through the characteristics of the reaction force. Although it seems not much difference from the angle of up and down, there are still pros and cons.
Most propellers on the market choose plastic products, or higher quality carbon fiber propellers. For safety reasons, you can also add some drone blade protection measures(such as external protective covers, etc.), especially when flying indoors or in the vicinity of someone.
2. Brushless Motor
At present, almost all new UAV drones for sale on the market have used external-turning brushless motors, which are safer, more efficient and less noisy than brushed motors. The design of the motor is equally important, as more efficient motors can save battery life and increase drone flight time, which is what every user expects.
3. Receiver
Usually it is a radio receiving component, which the minimum channel required for control is 4, but 5 are recommended. If you need to DIY a drone yourself, there are many receiver manufacturers on the market for you to choose today.
4. Antenna
Depending on your receiver, it could be an iron cylinder antenna or a rubber antenna.
5. Battery
The best battery on the market is a lithium polymer battery that has the best combination of power, energy and life.
6. Battery Housekeeper
A monitoring of your battery is critical to flight safety. If the drone is flying too far, it will either rush to land or crash directly after running out of power.
7. Yuntai
It is a drone component, which the Inspire 1 Zenmuse X5R PTZ is rotatably mounted to provide a stable working environment for cameras or other sensors.
8. Sensor
Modern drones are not just aerial photography and photography. Lidars, thermal energy and other types of sensors are also installed on drones and used in different fields.
The camera installed with the GPS can be used to accurately create 3D measurement images, and the 3D measurement images are formed by stitching the images through the flight path and regular photographs every second.
9. Anti-collision Sensor
Modern drones also include anti-collision sensors based on vision, ultrasound (sounding), infrared, and laser radar.
10. Landing gear
If the drone needs to rise and fall in an irregular ground or complex environment, the landing gear needs to be installed. Of course, if the ground conditions are good and there are no other pods and mounting equipment, you can choose not to install the landing gear.
Today, most drones are equipped with fixed landing gear. However, more flexible landing gear, such as those that require 360-degree aerial photography, can fold the tripod telescopically without obscuring the lens line of sight.
10. Landing Gear
If the drone needs to rise and fall in an irregular ground or complex environment, the landing gear needs to be installed. Of course, if the ground conditions are good and there are no other pods and mounting equipment, you can choose not to install the landing gear.
Today, most drones are equipped with fixed landing gear. However, more flexible landing gear, such as those that require 360-degree aerial photography, can fold the tripod telescopically without obscuring the lens line of sight.
11. Rack
In general, short racks can increase the mobility of the drone, while long-range drones are more stable. The rack is the main part of the drone, but it is easily damaged by impact, so fly as far away from the ground as possible.
12. Drone Board
This is the central hub of the drone, starting to radiate like a spoke of a wheel, with batteries, flight controls, ESCs, cameras, receivers, etc.
13. Electronic Speed Controller (ESC)
Commonly known as "electrical adjustment", it is an electronic circuit designed to change the speed and direction of the motor, as well as the brakes. It converts DC power into three-phase AC to drive the motor.
ESC is one of the important components of the modern professional race drone, which provide high-power, high-frequency, high-resolution three-phase AC power to the motor.
14. GPS Module
The GPS module is typically a combination of a receiver and a geomagnetic instrument that provides latitude, longitude, altitude and heading. GPS is an important condition for waypoint navigation and autonomous flight. The use of GPS without drone is very limited. GPS can navigate a long distance relative to in-line, and can use 3D images with lidar and photogrammetric sensors.
GPS stands for Global Positioning System, and as long as there are at least four or more US satellites nearby, it can provide the system with a standard location time and weather conditions in the area.

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing.

Multispectral Camera Drone Sprinkler Head Cleaning(2021年)

szttfuav — 2021-12-01T11:23:40+0900

http://www.szttfuav.com/news/multispectral-camera-drone-sprinkler-head-cleaning.html

Liquid has impurities and lack of regular cleaning are the causes of blockage of the sprinkler head of the multispectral camera drone. So what should we do when we're stuck with a blockage of multispectral camera drone sprinkler head?

Cleaning Misunderstanding
Some drone pilots like to use metal tools (needle, blade) to clean the sprinkler head. Although the metal tool is easier to remove the blockage, it is due to the high hardness of the metal tool, which may cause damage to the sprinkler head, resulting in inaccurate flow or reduced atomization. This results in a situation that affects spraying effectiveness.

So Can We Use a Softer Piece of Paper?
When the multispectral commercial UAV camera drone sprinkler head is cleaned, the sprinkler head is generally wet. Although the paper sheet can be well embedded in the metal gap of the sprinkler head, when the tissue sheet is swollen and swelled, it is easy to get stuck in the metal gap, and the cleaning work will become more troublesome.

Correct Cleaning Method
After eliminating these two wrong choices, it is recommended to use a toothbrush for sprinkler head cleaning. The toothbrush bristles is capillary, brushed back and forth along the metal gap, and can easily extend into the gap of the sprinkler head to clean the drugs or impurities remaining in it. Moreover, the bristles are soft and won't damage the metal part of the sprinkler head.

We should use a soft-bristled toothbrush and clean the UAV drones for sale after normal use for reuse. When you work outside the hotel, you can take the hotel's disposable toothbrush. Although this toothbrush has a short service life, it can still meet the requirements of sprinkler head cleaning.
It should be noted that the sprinkler head should be removed from the aircraft before cleaning. Keep the sprinkler head moist when cleaning and use moderate force to clean. After cleaning, you can check the light source to confirm that the sprinkler head blockage has been completely cleaned.

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing.

Racing Motor Series(2021年)

szttfuav — 2021-12-01T11:23:18+0900

http://www.szttfuav.com/diy-components/racing-motor-series.html

Quality high-temp motor windings
7075 Aluminum alloy
Eight-bladed cooling fan
Great power
FPV Racing Motors
FPV fpv drone motors are designed with one thing in mind - maximizing Multi-rotor performance! The best drone racing motors are the new standard performance. These motors are built for a specific type/application allowing for further refinement and efficiency/power to be optimized.

Built by the highest quality components from Japan bearings, N45SH magnets, 0.2mm laminations, 180deg oxygen free copper wire, 0.005g balancing, perfect wind laid down and 100% QC, and then the design of racing quad motors are also evaluated for their type application and everything from their mounting, to the prop type adapters are taken into consideration. These motors are truly works of art.

Features of Quad Brushless Motors :
• 7075 Aluminum alloy
• High-strength
• Quality high-temp motor windings
• Japanese bearings
• N54 super magnets
• Eight-bladed cooling fan
• Anti-skid teeth to lock your propeller in place
• Great power
• Perfect for X frame racing drones
These motors are unmatched in quality and value, and the performance speaks for its self.
The R1306-2300kv multirotor motor is ideal for small 180~220mm multirotor and 4~5-inch props.

The R1806 Motor will have your 150 ~ 200mm multirotor performing better than imagined.

The R2205 are perfect for 150 ~ 290mm size quads. They come with a larger 3mm shaft and bigger bearings for motors of this size. R2205 have far less sync errors than other motors making them more responsive to pilot input. They are an excellent companion for 4-6” propellers.
Racing motor R1306

ModelVolts(V)PropAmps(A)Thrust(gf)Watts(W)Efficiency(G/W)Temperature
R1306-3100kv7.4V/2S50301.47010.46.834℃
3.314024.45.7
5.722042.25.2
11.1V/3S5*32.110023.34.345℃
Racing motor R1806

ModelVolts(V)propAmps(A)Thrust(gf)Watts(W)Efficiency(G/W)Temperature
R1806-2380kv11.1V/3S4*4.51.910021.14.737℃
4.220046.64.3
934099.93.4
5*4*31.310014.46.9
3.420037.75.3
10.5460116.63.9
14.8V/4S4*4.52.515037.04.155℃
6.330093.23.2
13.2500195.42.6
5*4*31.715025.26.0
6.540096.24.2
15.0700222.03.2
R
ModelVolts(V)PropAmps(A)Thrust(gf)Watts(W)Efficiency(G/W)Temperature
R2205-2550kv11.1V/3S5*4.52.820031.16.437℃
5.840064.46.2
13.2570146.53.9
6*4.53.120034.45.840℃
7.640084.44.7
19.17502123.5
14.8V/4S5*4.54.530066.64.560℃
11.9600176.13.4
19.1840282.73.0
6*4.54.1430060.74.9
11.0600162.83.7
26.21020387.82.6
acing Drone 2205

ModelVolts(V)PropAmps(A)Thrust(gf)Watts(W)Efficiency(G/W)Temperature
R2205-2550kv11.1V/3S5*4.52.820031.16.437℃
5.840064.46.2
13.2570146.53.9
6*4.53.120034.45.840℃
7.640084.44.7
19.17502123.5
14.8V/4S5*4.54.530066.64.560℃
11.9600176.13.4
19.1840282.73.0
6*4.54.1430060.74.9
11.0600162.83.7
26.21020387.82.6

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing.

Racing Drone FPV Frame 195(2021年)

szttfuav — 2021-12-01T11:22:53+0900

http://www.szttfuav.com/diy-components/racing-drone-fpv-frame-195.html

Quality pure carbon fiber drone frame
More simple operation settings
Real-time image transmission
Long distance remote control
Stable performance

Features of fpv racing frame:
Full Carbon Fiber frame kit, which is ultralight and great intensity.
Support for HD camera, image transmission and other replacement components, you can DIY to change it easily as you wish.
Ultra-fast flight speed, easily manipulated.
Long distance remote control of x frame quadcopter in high sensitivity.
A very popular Mini Drone with a strong rack, beautiful appearance, and a stable structure for smooth flight--the best choice for fly and FPV.

ItemFPV frame F195
Wing Length126mm
Fuselage Wheelbase195mm
Body Size178*178
Weight60g
Recommended Parts (not included ):
Brushless motor2204 / 2205 / 2206 / 2207 / 2305 / 2306 / 2308
Propeller:5 inches
CameraRunCam Swift / FOXEER FPV cameras with 2.1mm / 2.5mm / 2.8mm wide-angle lens and so on
VTX:600mW 48CH transmitter
Battery4 - 6S 1300 - 1500mAh LiPo

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing.

Racing Drone FPV Frame 140(2021年)

szttfuav — 2021-12-01T11:22:31+0900

http://www.szttfuav.com/diy-components/racing-drone--fpv-frame-140.html

Robust 3K carbon fiber true X frame
Specially designed mount
Super bright LED taillights
Full 3K high strength carbon board
egree scale facilitates

Description:
F140 racing drone complete kit, small as a sparrow, it is nonetheless equipped with everything for professional FPV racing. With 7075 aviation-grade aluminum fuselages, your racing drone is capable of dealing with considerable impact in case of a crash. In addition, the degree scale on the fuselage is laser cut, which makes mini fpv drone kit convenient for players to adjust the angle of the camera by themselves. There are also two kinds of mounting holes - 20 x 20mm and 30.5 x 30.5mm for installing different flight controllers.

Main Features of Complete FPV Drone Kit:
● Robust 3K carbon fiber true X frame and 7075 aviation-grade aluminum fuselage
● Specially designed mount for GoPro Session, RunCam Swift Mini / Micro Swift
● Degree scale facilitates adjusting the angle of the camera
● 20 x 20mm and 30.5 x 30.5mm mounting holes for different flight controllers
● Comes with super bright LED taillights for flying at night
ItemFPV frame F140
Wheelbase139mm
Dimension120 x 120mm
Main board3mm thick
Weight32g
Recommended Parts (not included):
Flight controllerF3 / F4 / Naze32 / CC3D
Motors1306 / 1406 / 1407 / 1408
ESC15 - 20A
Propeller3 inches
Battery3 - 4S 550 - 850mAh

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing.

Racing Drone Flight Controller OMNIBUS F4 OSD(2021年)

szttfuav — 2021-12-01T11:22:10+0900

http://www.szttfuav.com/diy-components/racing-drone-flight-controller-omnibus-f4-osd.html

Current and voltage sensors
Super-Fast Operating Speed
Built-in BEC & OSD
Full carbon fiber made
Small(er) Size

F4 Flight Controller
This version of the Flip32 AIO uses improved components and design that will properly limit the voltage to the Mini OSD preventing voltage spike and damage to the OSD.

Features of Racing Drone Flight Controller :
• STM103 MCU runs Cleanflight firmware
• 8PWM output, supports Octocopter
• MS5611 Barometer
• Only 35x35mm, mount holes 30x30mm
• Onboard USB (for config the OSD and FC)
• 5V 3A UBEC (2-6S)
• OSD hardware, Compatible with MinimOSD/MWOSD/CC3D OSD
• Small PDB
• Current and voltage sensors
• Better OSD Chip used with less power consumption
• 2x Software serial, 2x Hardware serial ports

Small(er) Size
With the incredibly small size, it can be mounted onto the
more mini-sized airframe (i.e. 130mm or below) and also
features all the functions that regular FC for FPV(s) has.
DShot 150/300/600/1200

Modes Supported
Besides the regular PWM mode,
Oneshot125/Oneshot42/Multishot modes,
the latest DShot150/300/600 modes are
also supported.

Super-Fast Operating Speed
The STM32F405 MCU which features the powerful
computing capacity and super-fast operating speed can
support the PID controller with higher cyclic frequency &
the gyro with higher refresh rate.
Built-in BEC & OSD
The built-in BEC (5V/1.5A) can provide
power for various electronic devices;
the internal OSD allows users to adjust
or set all OSD parameters via the
Betaflight/Cleanflight software easily.
Betaflight/Cleanflight Firmware Supported
The flight controller supports the Betaflight/Cleanflight firmware and allows users
to adjust or set various parameters via the Betaflight/Cleanflight software easily.
It's more applicable to the FPV flight & racing.
Compatible with 4in1 ESC
When pairing the Nano F4 flight controller with the 4in1 ESC,
the wiring & installation can be very simple and easy.
Basic Features
Compatible with (Multirotors)Hexacopters
Multi-rotor TypeQuadcopters
FC ProgrammingSupported
Compatible with (Modes)PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300,
Dshot600, Dshot1200, Proshot1000
Compatible with (Transmitters)PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
OSDBuilt-in
Voltage MonitoringSupported
Current MonitoringSupported
External BuzzerSupported
LED ControlSupported
BEC
5V @ 1.5A
USB PortMicroUSB
Size27x27mm
Weight3.3g
Applications130&below FPVs

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing.

How to Choose the Right Plant Protection Drone? (5)(2021年)

szttfuav — 2021-08-20T12:31:28+0900

http://www.szttfuav.com/diy-components/flight-controller/

There are not many plant protection drones on the market that can operate at night. If you want to know whether the drone has this mode, you only need to test it at night. Through visual inspection, laser, flashlight, etc., you can intuitively see whether the flight route is straight and accurate, whether it is accurate, and avoid obstacles in time.

Can the operation progress be monitored?

From the perspective of farmers and plant protection team managers, it is necessary to avoid cutting corners and materials by operators because it may bring harmful effects such as pesticide damage, pesticide waste, and ineffectiveness.

In the past, people usually stayed on site to monitor the progress of operations. But if the selected plant protection drone has a good monitoring system, such as real-time monitoring, knowing how many devices are in which plots and how to set up a certain route, and the progress of the operation, then we can spend more time in valuable place and can ensure the progress and effect of the operation from a long distance. Therefore, when choosing a plant protection drone, we should not only look at the aircraft itself, but also pay attention to other systems and equipment in its entire solution.

To sum up, when choosing a plant protection drone product, the operation effect is one of the key indicators that need to be considered the most. Specifically, it can be investigated from several aspects such as whether it can be sprayed accurately and evenly without heavy spraying and leaking, whether it can work at night and adapt to a variety of terrain, and whether it can be remotely monitored.

Shenzhen TitanFlying Technology Co., Ltd is a professional drone motor manufacturers, we provide high speed motor for drone, diy drone flight controller and etc. Want to know more? Please contact us.

How to Choose the Right Plant Protection Drone? (4)(2021年)

szttfuav — 2021-08-20T12:30:53+0900

https://www.szttfuav.com/professional-drone/agriculture-drone/

Can it adapt to different working hours and various terrains?

In order to achieve good operational results, the adaptability of plant protection drones under various conditions is very important. For example, can plant protection drones adapt to the operation of tall crops? Can plant protection drones operate in areas with large undulations? Can plant protection drones operate at night? This is something we can consider when choosing.

For crops of different heights and uneven terrain, in order to ensure the spraying effect, it is necessary to maintain a relatively constant distance between the plant protection drone and the crop canopy. Currently, plant protection drones can achieve this through ground-like flight technology. When drones that cannot perform ground-like flight work on uneven crop canopy, short-crown crops may be far away from the drone and have poor drug application effects. The changes in the terrain, especially the elevation, may cause the drone to collide and break.

Ground-like flight is generally achieved through equipment such as ultrasound, radar, and ground vision system. When choosing a plant protection drone, try to choose a agricultural uav with a good ground-like flight effect, and the pros and cons of ground-like flight technology can be intuitively understood by observing the flight status of a slope.

Many pests appear day and night, and the effect of spraying drugs during the day is poor. Especially in summer, when the temperature is very high at noon, spraying medicine is easy to volatilize and affect the effect of medicine. This requires spraying medicine at night.

For plant protection drones, flying at night in farmland is not an easy task. First of all, we need drones to fly as accurately as we expected, and to automatically bypass obstacles when they are invisible to the eyes. This has higher requirements on the course planning system and obstacle avoidance system. This is very difficult for a purely manually controlled drone. This requires UAVs to achieve highly autonomous flight and fully automatic operations.

Shenzhen TitanFlying Technology Co., Ltd is a professional drone motor manufacturers, we provide high speed motor for drone, diy drone flight controller and etc. Want to know more? Please contact us.

How to Choose the Right Plant Protection Drone? (3)(2021年)

szttfuav — 2021-08-20T12:30:15+0900

https://www.szttfuav.com/professional-drone/agriculture-drone/

Will there be re-spray and leaked spray?

Part of the prevention and control requires higher chemical spraying. Especially for chemical control agents such as herbicides, spraying too much can easily cause phytotoxicity, and spraying less will not be effective. Whether to avoid re-spraying and leaking sprays is an important aspect of considering the effect of plant protection drones.

This is actually related to the AG drones' flight accuracy, which is mainly determined by the drone's positioning and navigation system. At present, the positioning and flying technologies of plant protection UAVs on the market mainly include pure manual, GPS navigation, and RTK navigation. The pure manual mode relies on human vision to operate the flight. It has high requirements on the pilot and the human influence is too large. It is relatively easy to cause heavy spray and leaking, and it is not conducive to the large-scale application of plant protection drones. We will not introduce too much manual operation here. We will focus on GPS technology and RTK technology.

At present, GPS technology has been widely used, and the most common one is mobile phone map navigation. But GPS positioning has certain errors. The positioning accuracy of ordinary GPS is greater than or equal to 1 meter, and the signal error has a 50% probability of reaching more than 2 meters. It can't support precise height setting, and the error can be as high as ten meters.

This may not matter much for looking at the map, but when spraying medicine in the ground, it may cause serious consequences. For UAVs using GPS navigation, it is difficult to avoid the interference of the environment and cause positioning errors, and the flight path may have a large deviation, which may cause re-spray and missed spray.

In the past two years, plant protection drones using RTK positioning technology have emerged on the market, and more and more drone manufacturers are following up on this technology. This is because RTK technology can control the positioning accuracy error within 10 cm, allowing the plant protection drone to fly and spray more accurately and effectively avoiding heavy spraying and leaking spray.

Therefore, when choosing a plant protection drone, you can find out whether the positioning technology adopted by the drone is the most advanced, whether it can achieve precise flight and precise spraying, and whether it can effectively avoid respray and leak spray.

Shenzhen TitanFlying Technology Co., Ltd is a professional drone motor manufacturers, we provide high speed motor for drone, diy drone flight controller and etc. Want to know more? Please contact us.

How to Choose the Right Plant Protection Drone? (2)(2021年)

szttfuav — 2021-08-20T12:29:43+0900

https://www.szttfuav.com/professional-drone/agriculture-drone/

How to ensure that the pesticides are attached to the leaves of the crop? This depends on the atomization effect sprayed by the drone. The smaller the atomized particles are, the more medicine and water are saved, and the more uniform adhesion is. It is not easy to gather into water droplets and then drip to waste. Generally speaking, the atomized particles below 250 microns can achieve a better spraying effect. Large particles of liquid medicine are easy to gather and drop. Only when the atomized particles are small can they be uniformly attached to the surface of the insects to achieve the effect of contact to kill and prevention..

Currently, the plant protection drones on the market mainly use pressure nozzles and centrifugal nozzles. Generally speaking, the atomized particles of the centrifugal nozzle are smaller and the its size can be adjusted. The centrifugal nozzle technology whose atomized particle size can be adjusted below 250 microns is the best choice. These data can generally be seen in commodity parameters, so you can pay attention when choosing products.

Can it be sprayed evenly to make the target area be filled with medicine evenly?

At present, there are two main spraying techniques for plant protection machines on the market. One is constant spraying technology, and the other is variable spraying technology.

In AG drone spraying, UAVs need to turn when flying in a field, and turning is generally accompanied by deceleration. If it is a constant spraying technique, the flow rate will not automatically adjust as the flight speed drops, which may cause excessive drug loading on crops at the turning position of the ground edge, and result in phytotoxicity and waste of pesticides. With variable spraying technology, the flow rate can be reduced as the flight speed decreases, so as to ensure the equal dosage of each inch of farmland and good spraying effects.

Therefore, when choosing a plant protection machine, it is recommended to choose one with variable spraying technology. Generally speaking, you can judge from the parameter setting interface of the product. Manual drones generally do not use this technology. If the interface displays the set flow rate, there is generally no variable spray technology. Plant protection drones with variable spraying technology can generally be set the spraying amount per mu.

Shenzhen TitanFlying Technology Co., Ltd is a professional drone motor manufacturers, we provide high speed motor for drone, diy drone flight controller and etc. Want to know more? Please contact us.

How to Choose the Right Plant Protection Drone? (1)(2021年)

szttfuav — 2021-08-20T12:29:07+0900

http://www.szttfuav.com/diy-components/ag-drone-motor-series.html

At present, there are many plant protection drone manufacturers in the market, and TTF today talks about how to choose plant protection drones from a relatively micro perspective.

There are of course many factors to consider. Generally speaking, the most noteworthy are the following issues:

a. Is this plant protection drone effective for spraying drugs?

b. Is the spraying efficiency high? Can it be finished within the required time?

c. How much money, time, and labor costs can be saved by using this plant protection drone to spray drugs?

As for operating efficiency and actual costs, before purchasing drones, it is best for you to have a chat with people who have already entered the flying defense and plant protection industry, carefully look at the data, make comparisons, and settle accounts. Now TTF only analyzes the effects of drones.

Whether the effect of plant protection drones is good or not can be judged from the following five aspects:

Can the pesticide be sprayed accurately to put the pesticide in place?

The most important thing for plant protection drones is to put the medicine in place. What is hitting in place? It is in the process of plant protection that pesticides must be sprayed on the front and back of crop leaves, and the drugs should be attached to the leaves to help the crop absorb them evenly, thereby effectively killing pests.

Traditional plant protection methods often fail to allow the medicine to hit the back of the leaves, and the spraying effect is compromised. The UAV has a strong downward pressure wind field when it flies, which can effectively help the pesticides adhere to the front and back of the crop. But sometimes the wind field is too big to cause drug waste and crop damage. If the nozzle of the plant protection drone is connected in series under the drone with a crossbar, turbulence will occur. The air flow generated by the propeller rolls up the liquid medicine and may adhere to the fuselage, causing waste. But if the nozzle is installed directly under the propeller motor, there is no turbulence in its wind field, the medicine will not pollute the aircraft itself, and it will not easily damage the crops.

Shenzhen TitanFlying Technology Co., Ltd is a professional drone motor manufacturers, we provide baby selfie drone, mini flyer drone, largest drone motors and etc. Want to know more? Please contact us.

Reasons for the Rapid Development of Plant Protection Drone Industry(2021年)

szttfuav — 2021-08-20T12:28:33+0900

https://www.szttfuav.com/professional-drone/agriculture-drone/

There are three main reasons why plant protection drones have developed rapidly:

1. Strong market demand

There are several realities in current agricultural activities:

(1) There is a shortage of rural labor, and young people are unwilling to engage in agricultural production, especially plant protection operations;

(2) Plant protection has always been the link with the lowest degree of automation of "cultivation, planting, plant protection, and harvest" in the agricultural industry chain;

(3) The current increase in the mechanization of agricultural production, the expansion of planting scale, and frequent outbreaks of diseases and insect pests, all put forward requirements for the efficiency and effectiveness of plant protection operations. Therefore, ag drones surely have a bright future.

2. In line with the development direction of the national agricultural policy

With the continuous support of policies, it is hoped that there will be a better plant protection method to improve the efficiency of plant protection operations and the use rate of pesticides, and plant protection drones can meet these two requirements.

3. The gradual maturity of drone technology

Especially the vigorous development of electric multi-rotor UAV technology is a necessary condition for the rapid maturity of the plant protection UAV industry. Only plant protection drones with low operating thresholds, purchase thresholds, and good stability can bring direct benefits to users, otherwise the scale effect cannot be produced. More mature products can bring sustained market growth.

In recent years, the main change in the plant protection drone market is that many domestic and foreign brands have gradually entered the international market, which has changed the phenomenon that local brands dominate the market; at the same time, the models on the market have also evolved from purely oil-powered helicopter products to multi-rotor plant protection drone.

Shenzhen TitanFlying Technology Co., Ltd is a professional drone motor manufacturers, we provide high speed motor for drone, diy drone flight controller and etc. Want to know more? Please contact us.

Plant Protection Drones Become the "New Favorite" of Farmland(2021年)

szttfuav — 2021-08-20T12:27:42+0900

https://www.szttfuav.com/professional-drone/agriculture-drone/

The plant protection drone has high operating efficiency. Compared with traditional manual spraying, the work efficiency of each plant protection drone is equivalent to 60 labors, which can greatly save rural labor. Plant protection drones spraying pesticides can save 30% of pesticides and 90% of water resources.

In recent years, the agricultural uav used for crop protection has developed rapidly. New models and technologies are widely used in the prevention and control of various crop diseases and insect pests such as rice, wheat, corn, sugar cane, fruit trees, and cotton. Agricultural production needs and farmers' welcome are one of the main reasons for the rapid development of plant protection aircraft, especially plant protection drones.

In places where the level of agricultural plant protection mechanization is low and pesticide application technology is backward, more than 70% of them use manual knapsack spraying machinery or motorized spraying machinery, and high-temperature weather is prone to accidents of operator poisoning, casualties. The popularization and use of plant protection drones can not only effectively reduce pesticide poisoning, casualties, but also have significant advantages such as saving water and drugs, not harming crops, convenient and efficient, convenient dispatching and transfer, and wide adaptability to environmental conditions.

The country's strong support is a strong driving force for the development of the plant protection drone market. National policy support can promote the explosive growth of the plant protection drone industry. Plant protection drones have changed the traditional methods of artificial pesticide spraying and plant protection. The market prospect is broad and the potential is huge.

Although plant protection drones have broad development prospects, there are also many disadvantages. At present, the various elements of the plant protection UAV market are not perfect, and the market ecology is still far away from maturity. The popularization of plant protection knowledge, the construction of sales and service channels, and the establishment of a plant protection team business model all require a large amount of investment and long-term operations. But TTF believes that professional and dedicated companies will always make the plant protection drone industry shine.

Shenzhen TitanFlying Technology Co., Ltd is a professional drone motor manufacturers, we provide high speed motor for drone, diy drone flight controller and etc. Want to know more? Please contact us.

Response to the New Situation of Plant Protection Drones(2021年)

szttfuav — 2021-08-20T12:26:57+0900

https://www.szttfuav.com/professional-drone/agriculture-drone/
These is no doubt that the plant protection drone industry is generally positive. However, how to protect their own profits and survival during the development of the industry has become a topic of great concern to every flying defense practitioner. Agricultural resources merchants have advantages in customer resources and product channels.

Combined with plant protection drone (one of the ag drones) services, they can better grasp customers and increase sales. However, agricultural resources merchants are often older and do not have redundant labor to form plant protection teams. Traditional plant protection teams often have good operational skills, but they also lack agricultural knowledge and agricultural resources. They often do not have a price advantage in the competition with agricultural suppliers.

Here are some tips for the majority of plant protection drone practitioners:

1. Establish a correct sense of service

For plant protection operations, the effect is first. We can't just calculate how much work we can do in a day and then make a quotation. We also need to consider whether the quotation is within a reasonable range and whether this quotation can achieve basic profitability while ensuring the effectiveness of the operation.

2. Increase income sources in the agricultural sector

The development of the market shows that pure flying prevention and plant protection cannot bring more in line with the expected income and stable customers. The follow-up service is not only a comparison of simple service prices, but also a comparison of who can bring more convenient production methods to farmers and higher production income. Only by truly grasping the hearts of farmers can we truly stabilize our orders.

3. Risk awareness

You must be aware of risks and have a deep understanding of the characteristics of plant protection drones and pharmaceuticals. Only a good safety awareness can avoid common operational risks. Continuous learning is needed here.

TTF is honored to witness the rapid rise of the emerging industry of plant protection drones, and it is also honored to be able to participate in this industry that benefits the people. We will follow the pace of development of the entire industry, continue to improve ourselves, and contribute to the growth of the plant protection drone industry.

Shenzhen TitanFlying Technology Co., Ltd is a professional drone motor manufacturers, we provide high speed motor for drone, diy drone flight controller and etc. Want to know more? Please contact us.

FARM FOCUS: How AG Drones Boost Agricultural Production(2021年)

szttfuav — 2021-05-25T12:56:36+0900

https://www.szttfuav.com/products/t1-24l-precision-agriculture-drones.html

Shenzhen TitanFlying Technology Co., Ltd is not an easy task to order or purchase from distant supplier, especially in international trade. This is especially the case with China, due to different barriers in both culture and language. Finding the right cheap UAV drone supplier will greatly reduce the purchasing cost of UAV drones for sale, guarantee product quality and shorten procurement cycles.

Brief Introduction of Agriculture Drones
Drones have become popular for several years, and different kinds of drones for various industries have been like mushrooms after rain. As one of the unmanned aerial vehicles, agriculture drone has been created and developed to facilitate the farm operations, boost the crop production, and gather the data of crop growth. With the help of the agriculture drones, farmers can have a relatively thorough view of the whole crop land, which make it easy for farmers to master the information from the Ag drones. And with the data, to take related measures and make the problems and hidden risks in a controllable condition will surely be easier and more clear.

Agricultural drones can provide an aerial perspective to farmers. This is a bird's-eye view that can make many problems clear at a glance, such as irrigation problems, soil changes, and pests and fungal infestations. Through agricultural drones, people can obtain multispectral images showing near-infrared view and visible spectrum view. From this combination, farmers can see the difference between healthy and unhealthy crops. Usually, the difference between these crops is not always clearly visible through the naked eye. Therefore, the information and data obtained by these agricultural drones can help evaluate the growth and yield of crops.

In addition, farmers can use agricultural drones to conduct regular surveys of crops according to their needs and preferences like every week, every day, or even every hour. The graph can show the change of the crop over time, thus showing possible problems. After identifying these problems, farmers can try corresponding methods to improve crop management and yield.

Application of Different Kinds of Agriculture Drones
If you are not very clear about the various agriculture drones, you can now take a look at the information given by TitanFlying, which may relieve your doubts.

Monitoring by Multispectral Camera Drone
Multispectral camera drones have multispectral imaging camera sensors, allowing farmers to more effectively monitor the growth of crops and manage their soil, irrigation, and health. Multispectral camera remote sensing imaging technology uses green, red, red edges and near infrared bands to capture visible and invisible images of crops.

Multispectral images combine professional agricultural software and equipment to output information as meaningful data, which cannot be obtained quickly and accurately by human power.

Through this land remote measurement method, farmers can more effectively monitor, plan and manage farm soil and crop data, thereby saving manpower and financial resources, and can reduce the use of pesticides, because problems will be discovered when they first appear.

T1-10L Naza Multispectral Camera Agriculture Drone is able to investigate the storm damage, monitor crop growth, and keep the health of the crops and livelihoods.

Spraying by Agriculture Spraying Drones
As early as more than ten years ago, drone spraying has been used in agriculture in many Southeast Asian countries, such as China, Japan and South Korea. Especially in Japan, its use of this type of spraying can be traced back to the 90s. Currently, we find that these countries are increasingly using agricultural drones. Mainly in rice production, because the rice field is a paddy field and the water flows over the ground, motor vehicles cannot enter the field, so drones are very suitable. Therefore, agriculture drone spraying is considered to be the most effective and safest method for processing crops grown on steep hillsides or in paddy fields.

Agricultural drone spraying can be carried out automatically, which is its uniqueness. Agricultural drone sprayers are equipped with almost all parts of other sprayers, including a water tank, a pump that pushes liquid through a hose to a nozzle, a filter and a pressure gauge.

Here are 3 types of quality AG drones for spraying

Agricultural spraying drone T1-10L Nova T1 series of agricultural spraying drones can perform well in spraying, since it is equipped with advanced flight controller, efficient and mature system, portable and foldable body, and easy-mastered professional remote control.

The T1-10L Black Hawk UAV is specially designed for agricultural spraying. With its high efficiency spraying system and advanced devices, it is very popular among farmers and in many countries.

T1-16L UAV Farming AG Drone spraying system equips a 10L capacity of a wave-proof tank, an efficient water pump, four nozzles. The wind-resistant nozzle can decrease pesticides float in the air and economize spraying operations.

Besides,T1-24L Precision Agriculture Drones spraying systeme quipped with a 24L capacity of wave-proof tank, advanced spraying system, and a high efficiency system is also a good choice.
Precision Agriculture Drone
Agricultural drones have changed the face of agriculture and plantation to a large extent in the last 4 to 6 years. The way many farmers and other entities conduct business has also changed significantly. This unmanned aircraft can detect the destructive power of bad weather, monitor the growth of crops and help the health of crops and herds. Agricultural drones are often used to spray fertilizers and pesticides.

Agricultural drones are used for agricultural measurement, which is an important part of precision agriculture to observe and respond to the variation in crops.

When you implement agricultural drone operations, you can save a lot of other costs and improve operational efficiency to ensure that the farm's output is maximized.
For best results, use agricultural drones to geotagged images of the field and receive real-time feedback and logs. At the same time, use these crop yields and other data to make positive changes to ensure the health of the farm.
We hope to share the relevant knowledge of agricultural drones with farmer readers, and hope that a better harvest will fall on the shoulders of every hard-working farmer in the world.
Mapping by AG Drones
Natural disasters such as floods, droughts, fires, pests or diseases often destroy agricultural profits. At this time, a drone flight can quickly and accurately assess insurance adjustment procedures and compensation.

It is difficult to assess and adjust crop losses using traditional methods, or the results obtained are not accurate. The usual approach is to manually measure damage to specific crops after an insurable event (such as a storm). First, the insurance loss adjuster must first determine all the damaged areas in the scene. Then, to measure the area, use traditional tools to estimate the affected area. Finally, the damage to the area is evaluated to calculate the economic loss.

In fact, unless the area is small, it is basically impossible to see all damaged areas. In order to assess the degree of damage as accurately as possible, the surveyor must walk and measure the site as time permits. Obtaining manual measurements is a daunting challenge. In many cases, it is necessary to walk through tall cornfields on a very hot day, or through huge muddy fields in hip water.

However, these efforts often result in guesswork or inaccurate reports. And then there are over or underpayments, valuation differences, shelving and other complicated issues.
Benefits of AG Drones
UAVs in the agricultural industry have their very suitable specialized and precise uses, so they are becoming more and more popular and needed. Equipped with near-infrared sensors, these drones can quickly and easily collect data about plant health and land management. With these data, it is easier for farmers to detect and manage water, fertilizers and pesticides, and time and cost are also saved. Agricultural drones can even assist crop spraying and risk monitoring. Benefits can be easily seen by improving efficiency and productivity, thereby increasing yield. The surveying and mapping capabilities of some agricultural drones with specialized software and equipment can also help farmers in long-term crop planning and management.

Multispectral cameras can be said to be farmers’ best friends. Let's take a look: these sensors can detect up to five discrete spectral bands (near infrared, red edge, red, green, blue) reflected from vegetation. The difference between healthy vegetation and unhealthy vegetation: healthy preparation reflects more specific light. These data and generated maps can help farmers identify nutritional deficiencies in crops, especially those diseases that are invisible to the naked eye, and can be detected before they occur. Farmers can use the data collected by agricultural drones in other ways such as phenotyping, water stress analysis, disease identification, fertilizer control, crop health maps, and other surveys. With the information provided by these drones, farmers can make informed decisions regarding the levels and types of fertilizers and pesticides. Formally because of this, this application method called precision agriculture can increase yield, reduce investment, save resources, reduce the impact of bad environmental conditions, and improve sustainable development.

With thermal imaging technology, it is easy to find irrigation problems such as water harvesting or dry areas. Farmers can get information in time to correct problems before they affect crop yields. The graphs generated by the data collected by drones are also important for land planning and management, because it allows farmers to make long-term plans based on the ground. Plant health and crop management are not the only uses of agricultural drones. Agricultural drones also play an important role in risk, livestock monitoring and management. Image functions including zoom functions can be used to spot injured animals, and farmers can find animals in need of help faster. UAVs can even be used to assist grazing: they can directly guide animals or alert people who are not grazing.
The Prospect of AG Drones
Agricultural applications will no longer require people to be on duty, and the agricultural application industry will undergo profound changes. Early adopters will simply convert traditional agricultural dust collectors into agricultural drones, and benefit from more precise spray patterns and longer service life. In fact, there are more traditional tools that can be replaced by agricultural drones. . True innovators may design drones suitable for more agricultural application scenarios in the future, so that they can be operated remotely from anywhere.

As drone technology matures, overspraying in agriculture will become a thing of the past. Agricultural drone spraying can be precisely controlled, and the cost of pesticides can be saved accordingly, and it will be more convenient, thus saving time and energy; spraying the same area of crops requires less cost. Drones can transport agricultural chemicals within a range of one to two feet above the crops at a precisely set speed without strenuous takeoff and preparation work, and no runway, so that farmers can use drones for planting single plant.
In the past, farmers could use large sprayer vehicles to do this (of course only limited to dry land), but when drones deal with plant diseases, they are many times faster and cheaper. At the same time, there is no need to compact the soil, and the drone will not touch the contaminated soil.

One day, agricultural sensor drones and agricultural sprinkler drones will directly meet in the air, talk, and after docking, they will jointly solve and deal with the detected problems. Perhaps one day, there will be a formation of agricultural spraying drones that will fly over an area to spray various kinds of medicines. The scene is very spectacular. In addition, there may be professional insecticide drones waiting in different places in an area, ready to attack pests to protect crops.

With more applications of agricultural drones, software programs for analyzing and correcting crop yields are correspondingly more accurate in the agricultural market. The agricultural drone flies over the crop area, accurately discovers the problems and hidden dangers that occur, and provides data to enable farmers to take necessary measures to solve the problems and prevent them before they happen. In this way, farmers can save time to focus on the overall situation of production instead of spending a lot of time investigating the health of their crops as in the past. The application in animal husbandry is also a valuable development field for agriculture drones, and more applications will be tried and improved in the future.
TitanFlying Technology will always provide advanced and quality AG drones for farmers all over the world to create more value.

Maintenance of Quadcopter Drone Battery(2021年)

szttfuav — 2021-05-25T12:55:59+0900

https://www.szttfuav.com/products/agriculture-drone/

At present, due to the weather, the use of agriculture spraying drone and accessories for agriculture protection services is increasing. As the leading role of agriculture protection, the quadcopter drone battery accessories of the agriculture spraying drone are particularly important. Therefore, when the agriculture spraying drone users come in the busy season, they should not only do a good job in the daily detection and maintenance of agriculture quadcopter, but also should prepare enough circulating batteries.

So how to properly maintain the quadcopter drone battery?

1. Please make sure to use a dedicated lithium battery charger for charging, and the charging current should not exceed 1C.

2. Lithium battery should not be fully charged for a long time storage, because it is easy to produce inflation, affecting the discharge performance. The best storage voltage is about 3.8v per chip, which should be fully filled before use to effectively avoid the phenomenon of flatness of battery.

3. In case of gas expansion, do not use sharp metal objects to penetrate the air release, which will cause a short circuit in the battery and cause the battery to explode or burn.

4. In the cold weather -10 ~ 5 ° C environment, the discharge efficiency of the lithium battery is about 80% of the normal temperature state, which will affect the aircraft's flight time, so it must pay attention when operation.

5.The battery of the cheap UAV drone should be transported in a state of 10%~50%. If the transport cycle is longer than one week, the battery should be charged to 3.8V~3.85V, and the power plug should be made of waterproof and short-circuit protection.

6. It is forbidden to store in humid environment.

7. It is forbidden to store at high temperature.

8. It is forbidden to store in direct sunlight.

What are the Core Hardware Technologies of Drones?(2021年)

szttfuav — 2021-05-25T12:55:28+0900

https://www.szttfuav.com/consumer-drone/

The power system of the drone usually has two types: electric motors and internal combustion engines, among which electric motors are mainly used. The electric power system mainly includes the motor, flight controller ESC (control motor speed), propeller and quadcopter drone battery. Whether the various parts of the power system match, whether the power system matches the whole machine, directly affects the efficiency and stability of the whole machine, so the power system is crucial.
1. Motor. The motor of the UAV drones for sale is mainly a brushless motor, with one end is fixed to the motor seat of the frame arm, and one fixed the propeller, generating downward thrust by rotation. Different sizes and loads of racks need to be matched with motors of different specifications and powers. The motor is not said to be bigger, the better, the efficiency is the key.
2. Flight Controller ESC. A separate motor does not work and requires an flight controller ESC, which is used to control the speed of the motor. Like the motor, the power system with different loads needs to match the flight controller ESC of different specifications. Although the flight controller ESC is too large, there is not much image. But when the flight controller ESC is large, naturally it is heavy, and the efficiency will not improve naturally.
3. Propeller. The propeller is a component that directly generates thrust, and the first purpose is to pursue efficiency. Matching motors, flight controller ESCs and propellers can use less power at the same thrust, which extends the drone's battery life. Have you found that the propeller in the above picture has both positive and negative directions? Because the motor drives the propeller to rotate, it will generate an anti-torque force, which will cause the frame to rotate in the opposite direction. By rotating a motor forward and rotating a motor in reverse, the counter-torque can be offset by each other, and the direction of the corresponding propeller is reversed.
4. Quadcopter Drone Battery. At present, the quadcopter drone batteries of top consumer drones are mainly lithium polymer batteries, which are characterized by high energy density, light weight, high current resistance, etc. These characteristics are more suitable for drones. Some mobile phones also use lithium polymer batteries, but the charging and discharging capabilities are far less than those of the drones (the theoretical value of single-cell battery discharge capacity exceeds 400 amps). Since these batteries are used in the power system of the drone, they are also called "power batteries."

The Maintenance Tips of Lipo Drone Battery(2021年)

szttfuav — 2021-05-25T12:54:56+0900

https://www.szttfuav.com/professional-drone/

Of all the devices in a drone, the one that consumes the most is the battery. When using the lipo drone battery, it should try to avoid overcharging or overdischarging. Try not to exhaust the lipo drone battery during flight, and keep at least 10% of the power when returning to land, and should fly at a constant speed.
1. Before the battery of the UAV drones for sale is exhausted, try to fly for one minute as much as possible, and the life will fly one more cycle. It is better to buy two more batteries, and don't fly the battery beyond the capacity limit every time.
2. The charging battery and charger must be placed in a safe place when charging. During charging, try to keep the charging point to a minimum and avoid overcharging when leaving for a long time.
3. A fully charged battery of professional grade drones should be used as soon as possible within three days. It is because after a week, the battery will swell and bulge. The battery should be stored in a cool environment. When storing the battery for a long time, it should be placed in a sealed bag or sealed explosion-proof box.
4. Extreme temperature environment can cause great damage to the battery, especially in the case of over-cooling in winter or overheating in summer. When the battery is used in the low-temperature environment, it should do "warm up" and "warm up" work to reduce the rapid increase of voltage. Flight times should be minimized at high temperatures.

Racing Drone Parts Overview(2021年)

szttfuav — 2021-05-25T12:53:54+0900

https://www.szttfuav.com/products/racing-drone/

Racing drone parts are critical to the smooth and safe flight of drones. Knowing the knowledge of racing drone parts will not only enhance your confidence in drone flight, but also will make it easier to replace and upgrade your racing drone parts while regularly checking your racing drone parts.

Prominent Advantages of Carbon Fiber Composites in Unmanned Aerial Vehicle Fittings(2021年)

szttfuav — 2021-05-25T12:53:22+0900

https://www.szttfuav.com/products/aerial-drone-for-photography-and-video/
Shenzhen TitanFlying Technology Co., Ltd is not an easy task to order or purchase from distant supplier, especially in international trade. This is especially the case with China, due to different barriers in both culture and language. Finding the right cheap UAV drone supplier will greatly reduce the purchasing cost of UAV drones for sale, guarantee product quality and shorten procurement cycles.

The fuselage of unmanned aerial vehicle is the main component of unmanned aerial vehicle and the flight carrier of the whole flight system. Usually, materials with high strength and light weight are used. At present, the main materials are ABS/modified PC and its alloys, carbon fiber materials, aviation aluminium materials, advanced composite materials and so on.

Among these common materials, carbon fiber composites show a prominent advantage. Carbon fibers are made of chemical fibers and petroleum fibers by special processes. Apart from high temperature resistance, friction resistance, conductivity, heat conductivity ,which is same to the common carbon materials, carbon fibers have higher strength, lighter weight and more corrosion resistance. Its density is less than one fourth of that of steel, but its tensile strength is 7-9 times than that of steel, and its tensile elasticity is also higher than that of steel. It is the only material whose strength does not decrease in high temperature inert environment above 2000℃. It is insoluble and bloated in organic solvents, acids and bases, and its corrosion resistance is outstanding. And it has a soft shape and can be processed into various fabrics. From the point of using, carbon fibers do not corrode and rust, so they are more durable than ordinary metals. Under extreme weather conditions, the properties of carbon fibers hardly change. The application in aerial UAV fuselage can improve the overall performance. At the same time, the use of integrated manufacturing technology can produce unmanned aerial vehicle parts, reduce the structural weight and reduce the production cost.

Composite material of carbon fiber unmanned aerial vehicle is a trend of development at present and in the future. The composite materials of low cost, light weight and high strength are widely used in the structure of unmanned aerial vehicle's airframe abroad. Rapid development and improvement have been made in material, integral design of the airframe structure, analysis and manufacturing technology, which has greatly changed the structure design and manufacturing technology of UAV drones for sale. This advanced integral structure has many advantages over conventional riveting structure.

1. Aerodynamic performance: smooth surface, accurate shape and good symmetry;
2. Structural strength: good overall and local rigidity, high strength, fatigue resistance, durability, fatigue damage resistance and high reliability of the body;
3. Weight: reduce the weight of the body structure by about 15%~20%, increase the effective load;
4. Technology and economy: simplify unmanned aerial vehicle technology and equipment, reduce assembly workload, shorten manufacturing cycle, and reduce the whole life cycle cost.

Development Trend of Unmanned Aerial Vehicle(2021年)

szttfuav — 2021-05-25T12:52:36+0900

https://www.szttfuav.com/consumer-drone/

Brief Introduction
Generally speaking, unmanned aerial vehicle can be divided into two categories: consumer level and industrial level. The former is mainly used in entertainment scenes, such as aerial photography, tracking and so on, while the latter is used in agriculture, forestry, plant protection, logistics, security patrol, oil and gas exploitation and other industries. Technically, the threshold for consumer UAV for sale is not high. Some industry insiders say that the open source program can support takeoff and landing. Therefore, a large amount of money has poured into the field of consumer unmanned aerial vehicle in recent years, resulting in the competition in this market showing the situation of the red sea.

Developing trend
Consumer unmanned aerial vehicle will present three major trends: first, enterprises that can develop special application scenarios will be further favored by the market, such as meeting the needs of elderly outdoor walking unmanned aerial vehicle; second, the intelligent upgrade of unmanned aerial vehicle functions and the formation of effective consumer experience will win the recognition of consumers, such as many novice control of unmanned aerial vehicle automatic return function and mileage function；third, enterprises from the consumer level to the industrial level, such as Dajiang, leading enterprises, are also positively positioned in the field of agricultural plant protection.

Unlike the product standardization and application homogenization of consumer drones for sale, industrial unmanned aerial vehicle users pay more attention to the accuracy of unmanned aerial vehicle data acquisition, and the value of resource analysis and utilization based on it. Therefore, the understanding ability of unmanned aerial vehicle enterprises is the core competitiveness of unmanned aerial vehicle enterprises. Unmanned aerial vehicle enterprises can find their own market positioning and vane only if they really understand the development needs of users and even better design related technical solutions. On this basis, industrial unmanned aerial vehicle not only needs to develop their own strong professional capabilities, but also need to effectively use artificial intelligence and big data technology to expand unique application scenarios and accurate service products.

Shenzhen TitanFlying Technology Co., Ltd produces consumer unmanned aerial vehicle with high quality. Welcome to consult.

Four Major Differences between Consumer and Military Unmanned Aerial Vehicle(2021年)

szttfuav — 2021-05-25T12:52:08+0900

https://www.szttfuav.com/consumer-drone/

Distinction one, electromagnetic evaporation
Because unmanned aerial vehicle transmits commands mainly by radio, the commands of consumer unmanned aerial vehicle can be easily detected by nearby enemy electronic systems when they transmit them, "it is equivalent to that the unmanned aerial vehicle just take off or arrive over the target, and the opponent immediately knows, so it loses the significance of covert contact of the unmanned aerial vehicle with the enemy."

Distinction three, load capacity
The most important application area of unmanned aerial vehicle is reconnaissance and monitoring. Whether it is equipped with photoelectric or infrared equipment, the weight of this kind of electronic pod is usually over several kilograms, far exceeding the effective carrying capacity of consumer unmanned aerial vehicle.

Distinguishing four, the problem of secret communication
In order to prevent the communication link from being truncated or monitored with the rear, military unmanned aerial vehicles need to equip encrypted radio, which has considerable size, power consumption and weight. In the execution of attack tasks, it is more necessary to maintain continuous communication with the rear. In this area, consumer unmanned aerial vehicles are even less qualified to install such equipment. Most importantly, in the modern combat system, unmanned aerial vehicle is no longer a single flight platform, and it needs to be embedded in the whole combat system to undertake the corresponding tasks, and you need to be carefully considered at the beginning of the design.

The use of the top consumer drones are currently more focused on personal entertainment. It not only lacks the ability to perform special tasks such as military and police ability, but also fails to carry out civilian tasks such as patrol, mapping or disaster surveillance. Unmanned aerial vehicles (UAVs) play a broader role in the civil field than the military field, such as using UAVs to monitor fires in remote forest areas, or dispatching multiple UAVs to patrol along highways to detect and evaluate accidents as soon as possible. Therefore, the general unmanned aerial vehicle technology is transformed into civilian products, and it should have a greater use.

Shenzhen TitanFlying Technology Co., Ltd produces consumer unmanned aerial vehicles with high quality. Welcome to consult.

Advantages and Characteristics of UAV Application in Agricultural Plant Protection Industry(2021年)

szttfuav — 2021-05-25T12:51:36+0900

https://www.szttfuav.com/consumer-drone/

For now, UAV(Unmanned Aerial Vehicles) has become an important equipment in the process of agricultural production, which is mainly because that the plant protection UAV has a very wide range of applications and great advantages in the agricultural production industry,such as pest prevention, crop growth monitor. Thus I will explain the applications and advantages of UAV in agricultural plant protection industry.

1. Improve spraying efficiency and reduce environmental pollution
At present,spraying pesticides for pest prevention in many places in China still relies on manual spraying, so the pesticide utilization rate is only 20%. Most of them are waste in the local environment, which not only causes environmental pollution, but also causes waste of resources. So many places are beginning to use drones to spray pesticides, which is mainly because using UAV spraying can timely and effectively control the occurrence of diseases and insect pests in large areas, and compared with the traditional manual spraying, UAV spraying has the advantages like high efficiency, and not being limited by terrain factors, good penetration and so on. The UAV use in agriculture can reduce the influence of pesticides on people, and downward swirling air flow generated by the aircraft can effectively reduce the chemical drift on the environment.

2. High spraying efficiency not affected by terrain
Traditional manual spraying of pesticides is inefficient and tiring. However, use air drone for pesticide spraying is not only highly efficient, but also not influenced by the complex terrain and the diversification of planting mode, which is very convenient for the agricultural industry to popularize, and it is good for application in large tracts of land. In addition, UAV is generally composed by flight platform, navigation flight control and spraying mechanism in the process of plant protection. Spraying operation is achieved by ground remote control or navigation flight control. It can spray medicament, seeds, powders, etc.

3. Monitor crop growth and decrease loss from risk
Except spraying pesticides, UAV can also carry high-definition digital camera, spectrum analyzer, thermal infrared sensor and other devices to fly on the farmland, and accurately monitor the growth of crops, and the data collected by the UAV can be used to assess the risk of crops. And according to the pest control work and actual effect in rice, wheat, corn, cotton and sugarcane, it can be proved that using UAV to monitor the normal growth of crops can help farmers to carry out targeted measures, and reduce risks and losses.

All in all, the application of UAV in agricultural plant protection industry has the advantages of high efficiency, low cost and environmental protection and so on. These advantages make UAV widely used in agricultural plant protection industry, which makes many people switch to agricultural plant protection industry and become a professional plant protection pilot.

Maintenance of Quadcopter Drone Battery(2020年)

szttfuav — 2020-09-27T18:43:21+0900

https://www.szttfuav.com/products/agriculture-drone/
https://www.szttfuav.com/

So how to properly maintain the quadcopter drone battery?

1. Please make sure to use a dedicated lithium battery charger for charging, and the charging current should not exceed 1C.

3. In case of gas expansion, do not use sharp metal objects to penetrate the air release, which will cause a short circuit in the battery and cause the battery to explode or burn.

6. It is forbidden to store in humid environment.

7. It is forbidden to store at high temperature.

8.It is forbidden to store in direct sunlight.

Shenzhen TitanFlying Technology Co., Ltd will give you the best service,contact us now.

What are the Core Hardware Technologies of Drones?(2020年)

szttfuav — 2020-09-27T18:42:57+0900

https://www.szttfuav.com/
https://www.szttfuav.com/consumer-drone/

1. Motor. The motor of the UAV drones for sale is mainly a brushless motor, with one end is fixed to the motor seat of the frame arm, and one fixed the propeller, generating downward thrust by rotation. Different sizes and loads of racks need to be matched with motors of different specifications and powers. The motor is not said to be bigger, the better, the efficiency is the key.

2. Flight Controller ESC. A separate motor does not work and requires an flight controller ESC, which is used to control the speed of the motor. Like the motor, the power system with different loads needs to match the flight controller ESC of different specifications. Although the flight controller ESC is too large, there is not much image. But when the flight controller ESC is large, naturally it is heavy, and the efficiency will not improve naturally.

3. Propeller. The propeller is a component that directly generates thrust, and the first purpose is to pursue efficiency. Matching motors, flight controller ESCs and propellers can use less power at the same thrust, which extends the drone's battery life. Have you found that the propeller in the above picture has both positive and negative directions? Because the motor drives the propeller to rotate, it will generate an anti-torque force, which will cause the frame to rotate in the opposite direction. By rotating a motor forward and rotating a motor in reverse, the counter-torque can be offset by each other, and the direction of the corresponding propeller is reversed.

4.Quadcopter Drone Battery. At present, the quadcopter drone batteries of top consumer drones are mainly lithium polymer batteries, which are characterized by high energy density, light weight, high current resistance, etc. These characteristics are more suitable for drones. Some mobile phones also use lithium polymer batteries, but the charging and discharging capabilities are far less than those of the drones (the theoretical value of single-cell battery discharge capacity exceeds 400 amps). Since these batteries are used in the power system of the drone, they are also called "power batteries."

Shenzhen TitanFlying Technology Co., Ltd will give you the best service,contact us now.

The Maintenance Tips of Lipo Drone Battery(2020年)

szttfuav — 2020-09-27T18:42:29+0900

https://www.szttfuav.com/
https://www.szttfuav.com/professional-drone/

1. Before the battery of the UAV drones for sale is exhausted, try to fly for one minute as much as possible, and the life will fly one more cycle. It is better to buy two more batteries, and don't fly the battery beyond the capacity limit every time.

2. The charging battery and charger must be placed in a safe place when charging. During charging, try to keep the charging point to a minimum and avoid overcharging when leaving for a long time.

3. A fully charged battery of professional grade drones should be used as soon as possible within three days. It is because after a week, the battery will swell and bulge. The battery should be stored in a cool environment. When storing the battery for a long time, it should be placed in a sealed bag or sealed explosion-proof box.

4.Extreme temperature environment can cause great damage to the battery, especially in the case of over-cooling in winter or overheating in summer. When the battery is used in the low-temperature environment, it should do "warm up" and "warm up" work to reduce the rapid increase of voltage. Flight times should be minimized at high temperatures.

Shenzhen TitanFlying Technology Co., Ltd will give you the best service,contact us now.

Racing Drone Parts Overview(2020年)

szttfuav — 2020-09-27T18:41:57+0900

https://www.szttfuav.com/
https://www.szttfuav.com/products/racing-drone/

Shenzhen TitanFlying Technology Co., Ltd will give you the best service,contact us now.

Prominent Advantages of Carbon Fiber Composites in Unmanned Aerial Vehicle Fittings(2020年)

szttfuav — 2020-09-27T18:41:20+0900

https://www.szttfuav.com/products/aerial-drone-for-photography-and-video/
https://www.szttfuav.com/

Shenzhen TitanFlying Technology Co., Ltd will give you the best service,contact us now.

Development Trend of Unmanned Aerial Vehicle(2020年)

szttfuav — 2020-09-27T18:40:36+0900

https://www.szttfuav.com/
https://www.szttfuav.com/consumer-drone/

Shenzhen TitanFlying Technology Co., Ltd produces consumer unmanned aerial vehicle with high quality. Welcome to consult.
Shenzhen TitanFlying Technology Co., Ltd will give you the best service,contact us now.

Four Major Differences between Consumer and Military Unmanned Aerial Vehicle(2020年)

szttfuav — 2020-09-27T18:40:12+0900

https://www.szttfuav.com/
https://www.szttfuav.com/consumer-drone/

Distinction two, there is a gap between voyage and effective idle time
Considering the distance of reconnaissance area, even small military UAV for sale must last for more than several hours. Otherwise, the reconnaissance time over the target will be very limited after deducting the time spent on the route. Therefore, the flight time of ordinary consumer unmanned aerial vehicle from tens of minutes to one or two hours is not of great practical significance.
Distinction three, load capacity
The most important application area of unmanned aerial vehicle is reconnaissance and monitoring. Whether it is equipped with photoelectric or infrared equipment, the weight of this kind of electronic pod is usually over several kilograms, far exceeding the effective carrying capacity of consumer unmanned aerial vehicle.

Shenzhen TitanFlying Technology Co., Ltd produces consumer unmanned aerial vehicles with high quality. Welcome to consult.

Shenzhen TitanFlying Technology Co., Ltd will give you the best service,contact us now.

Advantages and Characteristics of UAV Application in Agricultural Plant Protection Industry(2020年)

szttfuav — 2020-09-27T18:39:32+0900

https://www.szttfuav.com/
https://www.szttfuav.com/consumer-drone/

Shenzhen TitanFlying Technology Co., Ltd will give you the best service,contact us now.

VTOL Fixed Wing Drone T20(2020年03月25日)

szttfuav — 2020-03-18T18:19:12+0900

http://www.szttfuav.com/professional-drone/vtol-fixed-wing-drone-t20.html

Long-distance and high-speed cruise
More simple operation settings
Powerful oil movement support
Simple Operation
High Precision

T20 commercial quadcopter is a VTOL fixed wing UAV, which adopts hybrid configuration of fixed wing and quadrotor. Based on this special airframe design, vtol fixed wing drone can vertically takeoff and land and have no need for runway, takeoff and land airspace nor catapult. It has the ability of long-distance and high-speed cruise.

The industrial flight control and navigation system, which is specially designed for T20 series UAV, ensure the UAV can realize fully-autonomous flight, switch of flight mode and vertically takeoff and land, etc. No need for runway, takeoff and land airspace nor catapult let T20 can operate in complex terrain like mountains, hills and forest, and dense region of buildings, etc. These characteristics enlarge the application of T20 which is an ideal choice of industrial UAV.

More simple operation settings
Longer flight time
More secure detail protection
More professional air frame design
More powerful oil movement support
More advanced integrated configuration
Long Voyage: Single-flight 4- 6h, greater than 144km/h
Simple Operation: fully auto- magically intelligent section box to adjust the route fixed-point landing, survey data will be safely returned.
High Precision: upgrade based on the flight experience in different types of terrain. The final aerial survey data was field verified by Wuhan University professor and the horizontal accuracy was 1: 500.

Features of Long Range Fixed Wing Drone
Simple configuration design: Easy to assembly in short time
VTOL: No requirement for runway, takeoff and land airspace nor catapult, high efficiency
RTK: High positioning accuracy
Full automatic operation: Full-automatically controlled by GCS, easy to use
High security level: Perfect system monitoring and emergency management

Applications of Fixed Wing Survey Drone
Heavy task in areas where multi-rotors drones cannot quickly cover
Fire inspection tour in jungle area, animal/plant resources survey
Complicated environment where fixed wing UAV cannot find a place to take off and landing
City emergency surveillance, rapid transit
Aerial photography in hilly areas
Surface ship pre-warning

TTF Technology is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Just contact us!

T1-10L Black Hawk(2020年03月24日)

szttfuav — 2020-03-18T18:18:40+0900

http://www.szttfuav.com/professional-drone/t1-10l-black-hawk.html

Break Point Continue To Spray
High efficient spraying system
Regional-planning mode
Foldable Structure
Dose Monitor

Agriculture Hawk Drone T1-10L
T1 hawk quadcopter drone, specially designed for agricultural spraying, integrated advanced depth customization flight controller, efficient spray system, portable folding fuselage and simple professional remote control to provide users with efficient, safe and convenient plant protection service.

Foldable Structure
Black hawk drone is easy fold-up design is convenient for delivery, assembling and transportation, without weakening the original structural strength. The fold-up design can decrease 80% of the using space. We have a lot of different frames for your options. And we can also provide customize service to design new frames.

High efficient spraying system
T1 drone black hawk spraying system equips a 10L capacity of wave-proof tank, efficient brushless pump, two quick-release sprays and four nozzles. Based on the actual tests, spray width is 4m and operating efficiency is 1.6L/min. The wind-resistant nozzle can decrease pesticides float in the air and economize spraying operations.

Regional-planning mode
User can select the operation area on APP, and set operation distance, flight speed, altitude and other information. T1 will automatically fly back and forth according to the specified distance and traverse the entire area to complete the work, and the land operation is more convenient.

Break Point Continue To Spray
When detect the following signals such like the secondary battery alarm, low dose alarm, losing ground control signal, one key to return, T1 will automatically shut off the water pump, and make the current point as the continued point to spray. By the function of 'one key to return', UAV can fly to the continued point to restart operation, which ensures the continuous operation of plant protection.

Dose Monitor
When the dosage is lower than the warning value, the led indicator will flash. It will shut off the pump and record this point as the continued spraying point.

Blank Box
T1 provides a black box function, which can record the flight data completely. T1 data recording module can support 100,000 times cycle read and write. The maximum cumulative 32-hour flight data can be recorded.

TTF Technology is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Just contact us!

Commercial Drone(2020年03月23日)

szttfuav — 2020-03-18T18:18:07+0900

http://www.szttfuav.com/professional-drone/commercial-drone/

We have commercial uav for sale!
Commercial Delivery Drones Use
Architecture and construction

Architectural firms and construction contractors are also benefitting from the use of best drone for 4k video. Much like professionals in real estate, architects can use images and footage of a property to create 3D renderings of the structures they aim to build.

By cheaply and quickly creating aerial shots on which to place an architectural rendering, architects can create real-world concepts of their projects. This ability is indispensable to creating accurate designs and understanding how they fit within properties.

Access to these plans during the construction project is also useful to the people actually bringing the design to life.

Delivery--Commercial uavs Drones
Drone-based delivery services probably constitute one of the most obvious applications.

But the promise of goods delivered direct to your door by drone will only become more real as the technology continues to evolve and its capabilities expand.

This is especially true for areas where traveling by road is difficult or treacherous.

Emergency Services
Using professional 4k drone for emergency response services, particularly when it comes to medical needs, presents new opportunities for life-saving measures. Using drones to get eyes on a difficult situation, or to deliver medical supplies to stranded victims, could enhance the ability of emergency response physicians to offer care in difficult situations.

Engineering
Engineering firms are also utilizing drones on in-depth projects like oil pipelines, transmission cables and maintenance inspections.

Environmental monitoring and conservation
Much like how farmers use commercial grade drones to monitor crops and animals, the technology can be utilized to keep tabs on ecological environments. UAVs are discrete and can monitor animal populations without disturbing them. This type of monitoring offers important insights into conservation efforts, migration tracking, habitat management and flood assessment, which is particularly useful on the coasts.

Drones also provide data on the health of vegetative and animal populations, and the technology offers a unique ability to identify species in hard to reach places.

Media
Another obvious use for drones is in media coverage. Previously, aerial shots were available only to large news corporations that could afford a news helicopter. Now, local journalists and small-scale media outlets can easily capture aerial footage for news coverage.

In addition, drones can get into tighter areas, lower to the ground than a news helicopter could ever hope to travel. Even simple tasks, like recording a face-to-face interview, can easily be made more dynamic and engaging with a camera-equipped drone hovering nearby.

TTF Technology is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Just contact us!

Agriculture Drone(2020年03月22日)

szttfuav — 2020-03-18T18:17:26+0900

http://www.szttfuav.com/professional-drone/agriculture-drone/

Using agriculture quadcopter for agriculture is a hot topic these days, and for good reason. These unmanned aerial vehicles (UAVs), as they are sometimes called, are rapidly becoming a core tool in a farmer's precision equipment mix.

Growers are turning to high-tech tools, precision agriculture is a farming management concept that uses drones for agriculture to measure, observe, and respond to variability found in crops.

Often under the banner of precision agriculture, to respond to and mitigate these and other concerns. Precision agriculture divides a field into zones that can be individually managed with a range of GPS-equipped precision machinery. Technology enables farmers to collect, store, combine and analyze the layers of data that drive precision nutrient and irrigation management.

Agricultural sprayers T1 have been changing the face of farming and cultivation heavily the past 3-5 years, and completely changing the way that many farmers and other entities go about their business.

T1 ag drones rely on it's ability to actually affect the crops by applying fertilizer, pesticides or herbicides from the air with robotic perfection.

TTF Technology is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Just contact us!

Racing Drone Flight Controller OMNIBUS F4 OSD(2020年03月21日)

szttfuav — 2020-03-18T18:16:50+0900

http://www.szttfuav.com/diy-components/racing-drone-flight-controller-omnibus-f4-osd.html

Current and voltage sensors
Super-Fast Operating Speed
Built-in BEC & OSD
Full carbon fiber made
Small(er) Size

Best f4 flight controller
This version of the Flip32 AIO uses improved components and design that will properly limit the voltage to the Mini OSD preventing voltage spike and damage to the OSD.

Modes Supported
Besides the regular PWM mode,
Oneshot125/Oneshot42/Multishot modes,
the latest DShot150/300/600 modes are
also supported.

TTF Technology is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Just contact us!

FPV Drone Battery(2020年03月20日)

szttfuav — 2020-03-18T18:16:06+0900

http://www.szttfuav.com/diy-components/fpv-drone-battery.html

RoHS and CE quality testing standards
fueled by LiPo battery
worry-free of safety

Best 4s lipo battery
For most drone newbies, racing drone battery is very important to know how to choose a Lipo battery for your drone, multi-rotors are fueled by LiPo battery, they are able to store and deliver large amount of power.

Since they're made of individual cells, the battery you buy ends up having the voltage of all the cells combined. So, if you get 3S batteries, they will be 12.6v charged, and 11.1v discharged. 4S will be 16.8v charged and 14.8v discharged. If it's not clearly labelled, you will be looking for the label "11.1v" or "14.8v" on a battery to determine if it's a 3S or 4S. You never ever never want to fly a battery down to 0v. This is why you use certain gear to monitor battery voltage while flying.

Commonly for 5-inch mini-quads, 1300mAh to 1800mAh are the most popular batteries, although the sweet spot is usually 1300mAh or 1500mAh. Smaller capacity batteries work fairly well for lightweight builds because they weigh less, so the drone needs less power when flying, but they do reduce flight time. Higher capacity batteries increase flight time, but make the quad heavier, meaning it needs more juice to stay in the air anyway. This is why 1300 or 1500 mAh is the sweet spot. They have enough capacity to have good flight times and are also light enough to not put the capacity to waste on heavy lifting.

We always be strict of product quality, all of the rc drone battery complies with RoHS and CE quality testing standards, worry-free of safety.

Please Attention:

► For the RC UAV battery, only if the voltage and the plug match, then it will fit.

► Please stop charging immediately when the cell voltage been charged to 4.2v (Normal cell voltage is between 3.7v~4.2v).

► To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.

► If the new fpv drone battery won’t hold a full charge or loss the charge very quickly in short time, please use Balance Charger to charge and recycle several times first.

TTF Technology is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Just contact us!

Flight Controller(2020年03月19日)

szttfuav — 2020-03-18T18:15:15+0900

http://www.szttfuav.com/diy-components/flight-controller/

Are you looking for the best f3 flight controller? Now that you have chosen or designed a UAV frame, chosen the appropriate motors, propellers, ESCs and battery, you can start looking into choosing a flight controllers. A rc flight controller for a multi-rotor UAV is an integrated circuit normally made up of a microprocessor, sensors and input/output pins. Out of the box, a quadcopter controller does not magically know your specific UAV type or configuration, so you need to set certain parameters in a software program, and once complete, that configuration is then uploaded to board.

What is a diy quadcopter flight controller?
A flight controller (a.k.a FC) is the brain of the aircraft, which is basically a circuit board that has built-in sensors that detect orientation changes. It also receives user commands and controls the motors in order to keep the quadcopter in the air.

Nearly all diy drone flight controller has basic sensors such as Gyro (Gyroscopes) and Acc (Accelerometer). Some FC might include more advanced sensors such as Barometer (barometric pressure sensors) and magnetometer (compass).

Mini f3 flight controller is also a hub for many other peripherals, such as GPS, LED, Sonar sensor etc.

F3/F4 fpv drone controller is a flight controller for racing drone.
T1 flight controller is a mature flight controller for agricultural UAV. It provides rich and practical function that can meet the multiple requirements of the current agricultural UAV. By the integration of high precision sensor, the application of advanced industrial precision calibration algorithm as well as reasonable intelligent operation mode, the more efficient, accurate and convenient way of plant protection work can be realized.
T2 flight controller is specially designed for unmanned aerial vehicles, with highly reliable and remarkable flight performances. Providing multi-platform SDK, T2 quad flight controller is helpful for users to develop personalized unmanned aerial vehicles and tap into potentials of unmanned aerial vehicles.

TTF Technology is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Just contact us!

Brushless Motor(2020年03月18日)

szttfuav — 2020-03-18T18:14:33+0900

http://www.szttfuav.com/diy-components/drone-motor/

Brushless DC electric motor (BLDC motors, BL motors) also known as electronically commutated motors (ECMs, EC motors), or synchronous DC motors, are sensored brushless motor powered by DC electricity via an inverter or switching power supply which produces an AC electric current to drive each phase of the motor via a closed loop controller. The controller provides pulses of current to the motor windings that control the speed and torque of the motor.

Powerful brushless motor exhibit reduced energy use, long life, low noise, compact size and light weight characteristics.

Choosing a good high speed motor for drone can be easy and difficult at the same time. There's a few things to take in consideration when choosing one high speed brushless motor for your plane:

1- Prop size; Do you want the plane to be fast or slow? How much clearance do you have?
2- Amps; How many amps does the motor pull? More means more power
3- Voltage; 2s or 3s lipo? 2s would be better for smaller, lightweight planes.
4- kv; kv determines how fast the motor spins. Generally the higher the kv, the smaller the prop
Keep all of those in mind and you will be able to find the PERFECT motor for your plane.
5- Thrust; How heavy will the plane be? Heavier = need for more thrust to stay airborne

Your entire plane is built around your powerful rc motor and this is what you must choose first. When considering RC brushless motors there are several pieces of information you must take into account. The first is your drone parts motor KV. The KV of your motor is the number of revolutions per minute it will spin per volt. The lower the KV, the stronger the motor and as a result, you will want a larger propeller for maximum thrust. Often slower motors will also result in slower flying planes, a big plus for your first hobby grade RC drone. If you select a rc drone motor with a higher KV and a smaller propeller the speed of the thrust will be higher, and as a result your drone will fly faster.

TTF Technology is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Just contact us!