Suzhou TECON Construction Technology Co., Ltd

Modular Formwork(2024年03月26日)

teconform — 2024-03-20T13:01:23+0900

https://www.teconform.com/products/modular-formwork/

Modular Formwork
TECON Modular Formwork mainly consists of AluLITE Formwork, Steel LITE Formwork and Plastic Formwork TP60+.

For any villa project, a low-cost housing project, especially with hundreds of or thousands of houses at the same plan and size, modular formwork can maximize site productivity and greatly save labour costs.

On some occasions, even with conventional building methods such as bricks and concrete hollow blocks and others., build with rebar and concrete via modular formwork will still benefit you from lead time and total cost per house though the initial investment seems higher than traditional bricks and timbers.

Modular formwork for concrete can build wall and slab separately and build wall and slab together in one time pour with customized formwork planning and fabrication. Very timber and even no skilled workers are needed due to their easy to learn assembly sequence.

Advantages of Modular Formwork/Modular Shuttering
The modular formwork system is designed with standardized panels and components to reduce or limit cutting materials on site. This speeds up the entire process and therefore reduces on-site labour. They can also be interchanged with conventional methods. Commercial, civil, and industrial contractors can replace the traditional methods of cast-in-place concrete engineering by using modular formwork systems and quickly achieve one-time casting, thereby minimizing the financial expenditure of labour and materials. By choosing to lease, contractors can gain more benefits in reducing the costs associated with regular procurement. Once the work is completed, this also eliminates the need to recover the purchase cost by reselling the materials.

Types of Modular Formwork
Plastic Formwork TP60
TECON Plastic Formwork TP60 is recognized as the lightest formwork system due to its medium panel design and the application of ABS (Acrylonitrile Butadiene Styrene). It is mainly consisted of ABS plastic panel, erection handle, alignment waler, flex beam and shoring prop. Walls, columns, slabs can be quickly and efficiently formed even by unskilled workers.

As one of concrete formwork suppliers, we will do our best to meet all the needs of customers.

Heavy Duty Steel Prop(2024年03月25日)

teconform — 2024-03-20T13:00:43+0900

https://www.teconform.com/products/heavy-duty-steel-prop.html

TECON Heavy duty prop is the most robust and compatible steel props with high bearing capacity. It comply with EN1065 standards in two series, TEP-D and TEP-E. They have the additional benefit of requiring less because of their high load capacity.

Feature of Heavy Duty Steel Props Formwork

Robust and long service life

High bearing capacity following EN 1065 standard

Cast steel nut

Safe zone prevent hand from harzad Electro galvanization, powder coated and hot-dip galvanization finishing for option

Specification of Heavy Duty Steel Prop

Shoring heights: 2.5/3.0/3.5/4.0/4.5/5.0/5.5 m

1.7 times safety factor within work load

The work load of TEP-D is 20 kN

The work load of TEP-E is 30 kN

Outer Dimension: 76.1/ 63.5 mm

High tensile steel tube Q355

Heavy Duty Prop-D

DescriptionUnitQTYUnit Price
USDTotal Price USDUnit Weight
（KG）Total Weight
（KG）Remarks
Heavy Duty Prop TEP-D 25pcs00015.90Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop TEP-D 30pcs000180Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop TEP-D 35pcs00020.220Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop TEP-D 40pcs00023.430Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop TEP-D 45pcs00027.660Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop TEP-D 50pcs00033.060Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop TEP-D 55pcs00038.70Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop-E
DescriptionUnitQTYUnit Price
USDTotal Price USDUnit Weight
（KG）Total Weight
（KG）Remarks
Heavy Duty Prop TEP-E 25pcs00017.140Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop TEP-E 30pcs00019.350Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop TEP-E 35pcs00021.970Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop TEP-E 40pcs00029.760Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:
Heavy Duty Prop TEP-E 45pcs00032.350Powder Coated;
S355 Inner tube;
Refer to EN1065 norms:

Application of Heavy Duty Steel Prop
Applied as shoring support in various slab formwork system with high standard

TECON company offers concrete formwork scaffolding engineering for projects worldwide with many years of experience in dealing with contractors, builders & architects. We are one of the leading formwork manufacturers and suppliers of concrete shuttering formwork scaffolding engineering from China.

Girder(2024年03月24日)

teconform — 2024-03-20T12:59:53+0900

https://www.teconform.com/products/girder/

Girder
We have two types of formwork girder for DIY or tailed formwork planning use. One is a conventional H20 timber beam, while another is an Aluminium I beam made from aluminium alloy.

We have several models with different sections and heights regarding aluminium beam, which maintaining various bearing capacities for the optimal choice.

Types of Girder

H20 Timber Beam
TECON H20 Timber Beam is made from spruce imported from Northern Europe which ensures its high bearing capacity. H20 timber beam is widely used in girder-based formwork systems, such as shear wall formwork, slab formwork, column formwork and others.

Aluminium I Beam
TECON Aluminium i Beam is developed in eight types of H beam, which can be used as primary and secondary beams during construction. Its high strength and lightweight makes the aluminium i beam increasingly popular for multiple projects.

TECON company offers concrete formwork shuttering and scaffolding for projects worldwide with many years of experience in dealing with contractors, builders & architects. We are one of the leading formwork manufacturers and suppliers of concrete shuttering formwork scaffolding engineering from China.

Formwork Accessories(2024年03月23日)

teconform — 2024-03-20T12:58:49+0900

https://www.teconform.com/products/formwork-accessories/

Formwork Accessories
TECON's shuttering components and formwork components include aluminium TMP prop, heavy-duty steel prop (EN1065), TECON-Form plywood (film faced plywood with different grade and even imported quality), wall tie system, H20 timber beam, aluminium beam, steel waler, table head, tripod, BFD coupler, flange clamp, scaffolding couplers etc.

TECON also offers OEM fabrication service for any accessory withdrawing or samples from formwork and scaffolding shuttering companies outside China.

Girder
We have two types of formwork girder for DIY or tailed formwork planning use. One is a conventional H20 timber beam, while another is an Aluminium I beam made from aluminium alloy.

We have several models with different sections and heights regarding aluminium beam, which maintaining various bearing capacities for the optimal choice.

Shoring Props
TECON Shoring props cover the full range of props as floor support, fabricated on different load capacity, adjustable height and different raw material basis.

1/ Heavy Duty Steel Prop following EN1065 standard

2/ Acrow Prop following AS3610 standard

3/ Light Duty Prop

4/ Spanish Prop

5/ Italian Prop

We have also developed our mould and design to produce aluminium props at a maximum height of 6250mm. They are compatible with some European formwork brands, including MP prop.

If you want to know more kinds of construction formwork accessories, please visit our website.

Formwork(2024年03月22日)

teconform — 2024-03-20T12:57:07+0900

https://www.teconform.com/products/formwork/

formwork and shuttering
Different Types of Formwork Shuttering Systems
TECON offers different types of formwork systems in construction from framed panels in steel or aluminum to H20 girder and even plastic, for residential & commercial buildings, and civil engineering projects.
Formwork
TECON offers different types of concrete shuttering systems in construction, from framed panels in steel or aluminium to H20 girder and even plastic for residential & commercial buildings and civil engineering projects.

Other Construction products needed
Cost-effective frame and ringlock scaffolding systems for many applications on restoration, industrial and construction sites. They include facade protection, scaffolding and formwork accessories.

Tecon-Form covers all scaffolding and formwork and shuttering requirements. This allows us to offer a complete equipment solution for each project.

Choose Formwork By Function

Wall Formwork
TECON Wall formwork system mainly includes BASE 20 Wall Formwork, HETO Frame Wall Formwork, Alumi Frame Wall Formwork, Single Side Wall Formwork.

For the three systems in the modular formwork part, they can also fabricate walls and are even more user-friendly due to the handset function. They are portable Formwork, Plastic Formwork TP60 and Alu-lite Formwork.

Why Choose Wall Formwork
The wall formwork originally consisted of the frame and accessories. This results in a modular system with a wide range of applications and long service life, and universal and high efficiency for walls in medium to big scale projects under crane assistance.

It can be adjusted individually to adapt to complex shapes and high loads. Generally, the concrete building structure with high requirements on the surface and the anchoring pattern can be effectively realized using the frame wall formwork.
Column Formwork
TECON Column formwork system mainly includes Adjustable Steel Frame Column Formwork, Portable Column Formwork, BASE 20 Column Formwork, Plastic Round Column Formwork, and Plastic Adjustable Column Formwork.

They can fabricate different kinds of columns at different heights and diameters.

Why Choose Column Formwork
The design of the column formwork should be able to withstand the high pressure of fresh concrete because the relatively small cross-section requires rapid pouring of concrete. Therefore, it is essential to seal the joint very carefully and tightly.

The cross-section and height can be adjusted quickly and easily with minimum effort and the minimum number of system components, which is an essential criterion for determining the cost-effectiveness of the column formwork system. In addition, it is usually necessary to build many chromatographic columns with the same cross-section, so these systems need to be quickly transported to the next place of use without any assembly work. In addition, TECON has developed a system that utilizes the column formwork in china system to meet the high requirements that often occur on concrete surfaces, the uniformity of corners or sharp edges.

Beam & Slab Formwork
TECON Slab and Beam jumping formwork system mainly includes Flex 20 Slab Formwork, Slab Table Formwork, Aluflex Slab Formwork, Steel Deck Slab Formwork and Aludeck Slab Formwork.

Slab and beam fabrications are feasible with the three systems in modular formworks, among which are Portable Formwork, Plastic Formwork TP60 and Alu-lite Formwork.

Fabrications of diverse slabs and beams are feasible, as well as different storey heights, slab thicknesses and shapes, beam widths and depths etc.

Depending on different layouts and customer’s requirements, TECON engineer team will propose the optimal solutions and systems based on cost and site output.

TECON-Form Shuttering(2024年03月21日)

teconform — 2024-03-20T12:56:11+0900

https://www.teconform.com/products/film-faced-plywood/

In our wide product range of TECON-Form Shuttering, we have different grade film faced plywood, from TECON-Form Poplar, TECON-Form Hardwood to TECON-Form Birch. As one of film faced plywood suppliers, we also offer high-quality new material shuttering boards for sale such as TECON-Form Plastic Board.

The economic poplar core plywood has reuse times varying from 4 to 8 times, while high-end imported TECON-Form Birch can be used up to 30 times or even more.

TECON Plastic Board, as the replacement of the marine board, can be used anywhere and creates very smooth concrete finishing with a minimum of 30 times reuse. Even in tropical areas, no delamination will occur. Therefore it maximizes reuse times and saves cost significantly.

Types of TECON-Form Shuttering

TECON-Form Film Faced Plywood
TECON-Form film faced plywood is a series of strong, flat and waterproof panels for contrution site shuttering purpose. They has wide range from polar, hardwood to birch and birch x-life with different veneer material, film, glue and manufacturing process. TECON-Form film faced shuttering plywood is widely used in various formwork systems, from conventional formwork to H20 timber beam formwork as well as panel formwork etc..

TECON-Form Plastic Board
Tecon-Form Plastic Board offers smooth concrete surface and the most cost-saving solution for any shuttering activities, especially when you calculate the average cost into per time use. They can be applied to all wall, column and slab shuttering projects.

TECON company offers concrete formwork china (shuttering) and scaffolding for projects worldwide with many years of experience in dealing with contractors, builders & architects. We are one of the leading formwork manufacturers and suppliers of concrete shuttering formwork scaffolding engineering from China.

Facade Protection(2024年03月20日)

teconform — 2024-03-20T12:54:03+0900

https://www.teconform.com/products/facade-protection/

Tecon formwork successfully introduced four kinds of facade protection systems into site applications, following different site situations and contractors' preferences.

Three of them are Protection Screen (lifted by hydraulic cylinder), Self-Climbing Platform SCP(lifted by electrical hoist with chain block), Self-Climbing Platform SCP LITE(the aluminium version of SCP). All facade protection systems help the construction site make full closure at the slab edge and go up together with the structure without a tower crane lift. They cover height from 12 to 18m, with 1 to 5 layers work platform, thus are become more and more popular especially for high rise buildings.

Finally, the last system, the most economical handrail clamp, can be erected on the edge of the concrete slab with timber or GI pipe prepared by the site.

Protection Screen
TECON Protection Screen is a modular designed facade protection system which can climb automaticly via your high rise building by mobile hydraulic cylinder. It provides a maximum of three floors coverage with optional numbers of the platform. Therefore, it garantees a safe, efficient and weather-shielded working space for your site crews in hight position.

Self-Climbing Platform SCP
TECON Self-climbing Platform SCP is a fully sealed climbing facade operation platform which can be lifted by electric hoist. The platform provides high efficient and safe working conditions for high-rise project construction.

How to Install and Remove Your Column Formwork Correctly(2023年)

teconform — 2023-06-01T10:18:06+0900

https://www.teconform.com/products/column-formwork/

1. Installation of the column formwork
(1) Plaster the cement mortar leveling blanket according to the elevation, and position the pier according to the edge of the column formwork to ensure the accuracy of the elevation and the position of the column axis during the installation of the climbing form.

(2) Install the pre-assembled pieces of column formwork: First place the two adjacent pieces in place, and then temporarily fix them with iron wires to tie the main ribs; Use U-shaped clamps to connect and clamp the two pieces of formwork; After finishing the two pieces of formwork, install other two pieces of formwork.

(3) Install column hoops.

(4) Install tie rods or diagonal braces. Two tie rods are set on each side of the column formwork, which are fixed on the embedded steel ring of the floor, controlled by theodolite, and the verticality of the column formwork is corrected by the flower basket bolts. The angle between the tie rod and the ground should be 45°, and the distance between the embedded steel ring and the column should be 3/4 of the column height.

(5) Clean the inside of the column formwork, close the cleaning opening, and go through the pre-inspection of the column formwork.

(6) Removal of the column formwork. First remove the tie rods (or supports) of column formwork, then remove the column hoop, remove the U-shaped card connecting each column formwork, and then gently pry the formwork with a crowbar to separate the formwork from the concrete.

2. Product protection and safety precautions during installation and disassembly of the column formwork
(1) When hoisting the formwork, lift and put it lightly, and avoid colliding with the floor concrete, and prevent the formwork from deforming.

(2) The column formwork can be removed only when the strength of the column concrete can ensure that the surface and corners of the column are not damaged when the formwork is removed.

(3) Do not use a sledgehammer or pry frame to pry hard when removing the formwork, so as not to damage the concrete surface or corners of the column.

(4) The removed column formwork is cleaned and trimmed in time, painted with release agent, and stacked according to specifications.

(5) When removing the pre-assembled column formwork, hang the sling first, then remove the tie rods and the connecting parts of the two pieces of column formwork, and lift the column formwork after the formwork is separated from the concrete surface.

(6) Scaffolding should be erected for high-altitude operations, and safety belts should be worn by operators.

TECON company offers concrete formwork (shuttering) and scaffolding for projects worldwide with many years of experience in dealing with contractors, builders & architects. We are one of the leading formwork manufacturers and suppliers of concrete scaffolding shuttering engineering from China.

Selection and Installation of the Climbing Form(2023年)

teconform — 2023-06-01T10:17:41+0900

https://www.teconform.com/products/climbing-formwork/
https://www.teconform.com/formwork-positioning.html

1. Basic structure of the climbing form
Before choosing your climbing form, we must first know the basic structure of the climbing form. The structure of climbing form, or climbing shuttering, can be divided into two parts: a support frame and a lifting frame (or door frame). The lifting frame carries the form, and the enclosure and the work bench are hung on the support frame; the support frame is a simple frame inserted in the lifting frame, the lower end of which has a fastening device which can be fixed to the hardened concrete wall under the form, and the upper end of which extends out to the top of the lifting frame. Various lifting devices can be installed to transfer all the loads of the lifting frame.

The lifting frame used for the climbing form can be modified by the lifting frame of the sliding formwork, so that the supporting frame can be inserted into it. The method of climbing form's installing formwork, lifting scaffolding and work platform on the lifting frame is basically the same as that of the sliding formwork.

The height of the climbing form can be set to 150cm, and then the combined steel formwork is staggered and assembled to the required length, which has combined rigidity and can function as a plate beam. Each time it is grouted, the wall bolts are pre-embedded according to the set spacing, which can be used as a fixed support frame or as a pair of tension bolts to resist lateral pressure.

2. Selection and installation of the climbing form
The climbing frame of the climbing form can usually be arranged at equal distances of 150cm, and the lifting force required for each lifting frame will not exceed 10kN. The jacks used in the general sliding formwork can be applied to the climbing form. The weight of each support frame is less than 200kg, and it can be lifted individually, and the number of lifting is less than that of the lifting frame. For the pouring of each floor of the wall, the lifting frame needs to be lifted twice, and the support frame only needs to be lifted once, so it is also very easy to lift the support frame with inverted chains or pulleys.

The installation methods of different lifting facilities are described as follows:

(1) Rewinding chain (or hoist)

The inverted chain is hung on the top bar of the supporting frame, and the lifting frame can be raised to the required position and then fixed with the supporting frame. When the lifting frame, formwork and newly poured concrete in the formwork are combined into one body, the lifting frame can bear a certain vertical load. At this time, the connection between the supporting frame and the wall can be removed, and the inverted chain is hung on the top bar of the lifting frame. Lift the support frame to the required height, and then fix it with the wall.

(2) Electric lead screw

A screw jack is installed between the jack of the lifting frame and the jack of the supporting frame. Due to the forward or reverse rotation of the lead screw, the supporting frame or the lifting frame can be lifted respectively.

(3) Hydraulic jack

The hydraulic jack used in the sliding formwork can be slightly modified and can also be used as a lifting device for the climbing form.

As one of concrete formwork suppliers, we will provide more kinds of related products for sale, if you have needs, please contact us.

The Reason Why You Should Start Using Climbing Form(2023年)

teconform — 2023-06-01T10:17:13+0900

https://www.teconform.com/products/climbing-formwork/
https://www.teconform.com/products/climbing-formwork-cb180-240.html

1. What is the climbing form?
The climbing form is a special scaffolding concrete formwork for large vertical concrete structures. The climbing form is currently an effective solution for building seamless wall structures.

Depending on the type of building, there are several different climbing forms.

Some climbing forms can use hydraulic or electric jacks to move by themselves. Therefore, this type of form is also usually called "Climbing by itself formwork", or "self climbing formwork" for short. It can also be moved by crane and other equipment.

In addition to the self climbing formwork, there is also a construction slip and jump formwork, but it tends to move flexibly during the pouring process instead of periodically moving like the self climbing formwork. During the pouring process, the self climbing formwork can often remain in place. The slip and jump formwork picked up by the crane is usually used for buildings with five or more floors; And the self climbing formwork that is completely climbing by itself is usually used for buildings with more than 20 floors.

2. The benefits of using self climbing formwork
(1) Self climbing formwork usually does not require a crane to move them, which also reduces your general condition costs.

(2) Increase the construction speed by allowing the vertical and horizontal parts of the building to be constructed at the same time.

(3) The self climbing system minimizes labor time and has higher productivity (these systems are designed for repetitive actions) and require less manpower.

(4) Since the labor for installation and disassembly is less than that of traditional systems, safety is improved.

(5) The self climbing formwork can be used in almost all types of weather.

(6) Normally, the climbing form provides an area for scaffolding.

(7) Compared with the traditional system, the climbing form system is easy to clean and reuse, and generates very little waste.

The Beam and Wall Formwork Will Be Introduced Clearly to Everyone at One Time(2023年)

teconform — 2023-06-01T10:16:48+0900

https://www.teconform.com/products/beam-slab-formwork/
https://www.teconform.com/
https://www.teconform.com/products/tecon-single-side-wall-formwork.html

1. Beam formwork
The characteristics of beams are large span, small width and large height. Therefore, the beam formwork and beam formwork system often have the characteristics of good stability, sufficient strength and rigidity, and no distortion in excess of what is allowed in the specification is allowed.

⑴ The beam formwork should be installed after checking the elevation of beam bottom and correcting the position of the axis.

⑵ The bottom of the beam is supported by top braces (pipa braces). The spacing between the top braces depends on the cross-section of the beam, generally 0.8 to 1.2m. Between the top braces, horizontal tie rods and scissor braces should be set up so that they can be pulled together into one body. When the height of the bottom of the beam is greater than 6m from the ground, a bent frame or scaffolding should be installed; In order to ensure the solid support of the top brace, pads and wedges should be set on the tamped ground.

⑶ Clamping wood should be set under the beam side formwork to clamp the beam side formwork with the bottom formwork, and nail it to the top support. Brackets are set on the upper mouth of the beam side formwork. The brackets can be fixed by pulling up (upper mouth on the pull) or under bracing (supporting on the top brace). When the beam height is ≥700mm, additional diagonal bracing or split bolt should be added to the middle of the beam for fixation.

⑷ When the span of the beam is ≥4m, the middle span of the beam formwork shall be arched, and the arching height shall be 1 to 3% of the span of the beam.

2. Wall formwork
⑴ When the wall formwork is installed, one side formwork is usually first erected according to the side line and temporarily supported and fixed, and the other side formwork is erected after the wall reinforcement is tied up.

⑵ The split bolts of the wall formwork should be equipped with internal bracing sleeves (except for waterproof concrete). First, it can ensure the repeated use of the split bolts, and second, it can control the thickness of the wall.

⑶ Formwork reserved for door and window openings should have a taper, which should be installed firmly, not easy to deform, and easy to remove.

⑷ When the height of the wall formwork is large, one side of the formwork should be set aside for support in sections. If it cannot be supported in sections, the door panel should be set on the pouring side. The method of leaving and setting is the same as that of the column formwork. The horizontal spacing of the door panels is generally 2.5m.

⑸ The inner sleeve formwork set in the formwork which is reserved for the wall hole should be equipped with exhaust holes.

More details of formwork scaffolding engineering, please visit our website.

Basic Knowledge of the Concrete Formwork(2023年)

teconform — 2023-06-01T10:16:19+0900

https://www.teconform.com/products/formwork/
https://www.teconform.com/products/tecon-alumi-frame-wall-formwork.html

1. What is the concrete formwork?

Concrete formwork refers to a whole set of structural system of formwork formed by newly poured concrete and supporting formwork. The classification of formwork has various phased methods. According to the shape, it is divided into two types: Flat formwork and curved formwork; According to the stress conditions, it is divided into load-bearing formwork and non-load-bearing formwork.

2. Engineering quantity calculation of the concrete formwork

Unless otherwise specified, the volume of cast-in-place concrete and reinforced concrete formwork is generally calculated based on the area of the contact surface between the concrete and the formwork in square meters.

(1) The height of the formwork of cast-in-situ reinforced concrete columns, beams, slabs and walls (that is, the height between the outdoor floor to the bottom of the slab or the height between the slab surface and the bottom of the slab) shall be within 3.6m. In addition, the amount of support engineering will be increased according to the calculation of the excess.

(2) Holes in the cast-in-situ reinforced concrete walls and slabs with the single hole area of less than 0.3 square meters will not be deducted, and the side wall formwork of the hole will not increase; When the single hole area is more than 0.3 square meters, it should be deducted. The area of the hole side shear wall formwork should be incorporated into the shear wall formwork and board formwork for calculation of engineering quantities.

(3) The cast-in-situ reinforced concrete frame is calculated according to the relevant regulations of beams, slabs, columns, and walls, with wall columns attached and included into the wall for calculation of engineering quantities.

(4) If the height of the cup-shaped base cup mouth is greater than the length of the large side of the cup mouth, set the basic quota items of the tall cup.

(5) The area of the formwork shall not be calculated for the overlapping part of the connection between the column and the beam, the column and the wall, the beam and the beam, and the beam head and the slab head extending into the wall.

(6) The area of the formwork shall be calculated based on the exposed part of the exposed surface of the structural column. The area of the formwork is not calculated for the contact surface of the structural column and the wall.

(7) Cast-in-situ reinforced concrete cantilever slabs (awnings, balconies) are calculated based on the horizontal projection area of the external dimensions. The corbel beam and slab edge formwork outside the wall are not calculated separately.

(8) Cast-in-situ reinforced concrete stairs are calculated based on the horizontal projection area of the exposed surface size, without deducting the area occupied by the stairwell of less than 500mm. Side formwork such as stairs and platform beams are not calculated separately.

(9) The concrete step does not include the ladder belt, and it is calculated according to the horizontal area of the step size, and the area of the formwork is not calculated on both sides of the end of the step.

(10) The small-scale cast-in-situ concrete tank is calculated according to the external volume of the component, and the formwork inside, outside and at the bottom of the tank is not calculated separately.

If you want to know more kinds of scaffolding shuttering, please visit our website.

Safety Control and Installation Requirements of the Sliding Formwork(2023年)

teconform — 2023-06-01T10:15:50+0900

https://www.teconform.com/formwork-positioning.html

1. Safety control of the sliding tecon formwork

(1) The lifting equipment and operating platform of the sliding formwork shall be installed in accordance with the requirements of the construction design. There should be protective railings and safety nets around the platform.

(2) The operating platform should be equipped with fire-fighting, communication and pedestrian facilities, and lightning protection devices should be installed in the thunderstorm season.

(3) The construction load on the operating platform should be even and symmetrical, and overloading is strictly prohibited.

(4) The holes set on the operating platform should have a movable cover plate with obvious signs.

(5) In the construction of elevators, safety devices such as flexible safety cards and limit switches should be installed, and upper and lower contact signals should be specified.

(6) At the junction of the construction elevator and the operating platform, a safety springboard should be provided, and the springboard should be provided with handrails or railings.

(7) During the sliding process, the horizontal and vertical deviations should be checked and adjusted for every shift to prevent the platform from twisting and horizontal displacement. The sliding speed and demolding time specified in the design should be observed.

(8) The sliding formwork should be removed evenly and symmetrically, and the removed formwork and equipment should be hoisted to the designated place by ropes.

(9) The power distribution box should be located near the control console, and all electrical devices should be grounded.

(10) When steam curing is used in winter construction, the steam pipeline should be equipped with safety isolation facilities. Open flames are strictly prohibited for heating in the hothouse.

(11) If the hydraulic system leaks, it should be stopped for maintenance.

2. Safety requirements for the sliding formwork

The installation of the sliding formwork shall meet the following requirements:

(1) The installed formwork should have a small upper opening and a large lower opening. The single-sided inclination should be 0.1% to 0.3% of the height of the formwork. For cylindrical wall structures with slopes such as chimneys, the inclination of the formwork should be based on the slope of the structure. The situation is adjusted appropriately.

(2) The clear spacing at 2/3 of the height of the formwork below the top of the formwork should have the same width as the structural design section.

(3) The collecting and dividing formwork of the circular continuous variable cross-section structure must be arranged symmetrically along the circumference, and the collecting and dividing directions of each pair should be opposite, and the lap joint of the collecting and dividing formwork shall not leak the mortar.

(4) After the hydraulic system is assembled, it should be tested and inspected before inserting the support rod.

Analysis of Safety Measures for Bridge Formwork Construction(2023年)

teconform — 2023-06-01T10:15:20+0900

https://www.teconform.com/
https://www.teconform.com/products/scaffolding/

In the process of installing the bridge formwork in china, we should pay attention to the following safety measures.

1. Wear a safety helmet to check whether the tools used are firm before work. Tools such as wrenches must be hung on the body with ropes and chains to prevent them from falling and hurting people. When working, workers should concentrate and avoid nails piercing their feet and slipping in the air.

2. When installing and dismantling the bridge formwork of more than 5 meters, formwork scaffolding should be set up, and protective railings should be set up. It is forbidden to operate on the same vertical surface and it is required to fasten seat belts when working at high places.

3. Do not pile large batches of materials such as templates on the formwork scaffolding.

4. The wires and electric tools used on the bridge formwork should adopt a 36v low-voltage power supply or take other effective safety measures.

5. During ascend operations, various accessories should be placed in a tool box or tool bag, and are strictly prohibited from being placed on a template or bridge scaffolding; Various tools should be hung on the operator or placed in the tool bag and must not be dropped.

6. Operators working high above the ground are strictly forbidden to climb up and down the combined formwork or scaffolding, and are not allowed to walk on the top of the wall and the formwork at high altitude.

7. The reserved holes of the template should be covered or a protective fence should be set up with a safety net at the entrance of the hole.

8. When assembling and disassembling the steel formwork of the bridge, there should be someone coming to the operator's aid. They should help each other, and the movable parts should be fixed firmly, and it is strictly forbidden to stack or throw them on the scaffolding board.

9. When assembling and disassembling the steel formwork of the bridge, a stable climbing tool must be used. When the height exceeds 3.5 meters, scaffolding must be erected. When assembling and disassembling, no one can stand below except the operator. When working at high places, the operator should put on a safety belt.

10. The sequence and method of bridge formwork removal should be carried out in accordance with the provisions of the design of the supporting board, and operators should follow the principle of supporting first and then dismantling, and the principle of first non-load-bearing parts, then load-bearing parts and the top-down principle. It is strictly forbidden to hit or pry hard with a sledgehammer when disassembling the formwork.

Brief Analysis of the Climbing Form(2023年)

teconform — 2023-06-01T10:14:36+0900

https://www.teconform.com/formwork-positioning.html
https://www.teconform.com/products/climbing-formwork/

1. What is the climbing form?

Climbing form, also known as climbing shuttering, is a formwork china technique suitable for the construction of cast-in-place reinforced concrete vertical or inclined structures, such as walls, bridges, and tower columns. Climbing form can be divided into two types: "frame climbing form" (namely formwork climbing frame, shelf climbing form) and "non-frame climbing form" (namely formwork climbing form).

Climbing form is a formwork technique that integrates the processes and characteristics of large formwork and sliding formwork, and has the same advantages as large formwork and sliding formwork, which is especially suitable for the construction of super high-rise buildings.

Like the sliding formwork, it is attached to the vertical structure of the building during the structural construction stage, and rises layer by layer with the construction of the structure, so that the formwork does not occupy the construction site and does not use other vertical transportation equipment. In addition, it is equipped with operating scaffolding, which has reliable safety enclosure during construction, so there is no need to erect external scaffolding, which is especially suitable for constructing multi-story or high-rise buildings on a relatively narrow site.

2. The development of climbing form

Europe has already begun to develop the climbing form in the 1970s. In the process of popularizing the use of sliding formwork, people found that since the formwork slides against the concrete surface, the frictional resistance will be great, and it will crack or take away the concrete that has been poured in the formwork. Therefore, for the cylinder wall of large inclination, the method of lifting the formwork after pulling it away from the concrete surface has gradually appeared in the construction site. Or the method of sliding frame inverted form to reduce the frictional resistance during lifting can be adopted. In view of the fact that the lifting point of the sliding formwork is at the upper end of the support rod (or climbing rod), a variety of measures need to be taken to maintain stability. People found that it is better to land the lifting point on the hardened wall at the lower part of the formwork. It is easier and more stable. In view of this, in many construction sites at home and abroad, under different engineering and equipment conditions, different forms of climbing form systems have appeared. They have used winches (reverse chains) or lead screws as lifting facilities, and have achieved successful experience for high-rise buildings. During construction, it can also save materials of supporting formwork and speed up the construction progress.

Tunnel Formwork(2023年01月29日)

teconform — 2023-01-29T18:32:43+0900

https://www.teconform.com/tunnel-formwork.html

Tunnel form system is a thriving business in the globe. This development is driven by strong growth in private transport and exponential growth in the commodity and relevant industries, which hope to reach every corner of the world as soon as possible.

The Advantages of Teconform Tunnel Formwork
Here are four types of tunnel formwork construction trolley provided by TECON: Tunnel lining trolley, Waterproof board trolley, Cable trench lining formwork, Tunnel Invert Trestle.

It is not related to the construction method and can provide cross-sections of different load-bearing structures according to geological conditions and planned utilization. The simple shape of the rectangle provides the most cost-effective manufacturing option. However, a circular, elliptical section can also provide a specific advantage depending on the frame conditions.

Affordable Tunnel Shuttering Formwork Solution
The main criteria for selecting construction type and load-bearing structures are tunnel cross-section and its length. In addition, there are curves and inclinations associated with objects along the tunnel, as well as geometric shapes of clear width and height to consider. A well-prepared proposal including cost and planning will be submitted to you as soon as we get your inquiries.

If you want to know more details of tunnel form concrete building structures, please visit our website.

TECON Formwork Shuttering and Scaffolding Engineering.The leading formwork brand in China. As the specialist in formwork & scaffolding engineering area, we provide reliable products & in-time services for our customers in the construction industry worldwide.

The Concept of Building Formwork(2023年01月29日)

teconform — 2023-01-29T18:32:17+0900

https://www.teconform.com/the-concept-of-building-workform.html

The building formwork used for the construction of cast-in-place concrete structure is mainly composed of three parts: panel, supporting structure, and connecting parts. The panel is a bearing plate that directly contacts the newly poured concrete. The supporting structure is a temporary structure supporting the faceplate, concrete, and construction load, ensuring that the template structure of the building is firmly combined without deformation or destruction. The connecting parts are components that connect the panel and the supporting structure as a whole.

The building formwork is a molded shell and bracket formed by pouring concrete. According to the nature of the material, it can be divided into building formwork, building wood glue board, film board, multi-layer board, double-sided adhesive and double-sided film building formwork, etc. According to the construction process conditions, it can be divided into cast-in-place concrete formwork, pre-assembled formwork, large formwork, and zooming templates, etc.

Combined steel formwork is a new formwork that uses steel to replace wood in modern formwork technology, which has the advantages of strong versatility, easy assembly and disassembly, and high turnover. It can be used to construct cast-in-place reinforced concrete structures. When it is used for the construction of cast-in-place reinforced concrete structure, large-scale formwork of beams, columns, walls, and floor slabs can be assembled in advance according to the design requirements, hoisting the whole in place, or the bulk disassembly method can also be used. The new formwork reinforcement system has excellent characteristics such as lightweight and high load. The use of a new formwork reinforcement system not only enables the construction quality to be greatly improved but also enables developers and contractors to reduce construction costs. The products of the new lightweight formwork reinforcement system are light and durable and efficient in construction, which creates conditions for the promotion of light building structures, promotes the modernization of building formwork construction technology, accelerates the construction speed of house construction projects, and improves the quality of house construction projects.

Suzhou TECON Construction Technology Co., Ltd is a Chinese concrete formwork supplier that provides professional lightweight formwork. Welcome to purchase our products.

rchitectural projects with special requirements for customized solutions and unique designs. TECON are proud to provide Special Formwork Scaffolding Engineering and Design for valuable customers over the world.

The Best Time to Order Your Favorite Plastic Formwork TP60+ in Bulk Quantity with Discounted Price(2023年01月29日)

teconform — 2023-01-29T18:31:38+0900

https://www.teconform.com/the-best-time-to-order-your-favorite-plastic-formwork-tp60-in-bulk-quantity-with-discounted-price.html

TECON Plastic Formwork TP60+, is a new material formwork in china system made from ABS from Korea. Thanks to the light weight panels and fast lock handles, it provides project sites with the most convenient and efficient forming solution ever.

It's similar with Peri DUO and GEO-plast System, and the biggest panel 1200*600mm only weights 11kg per piece. TECON Plastic Formwork TP60+ is widely used for wall, slab, beam and column in modular houses. And we have test report of this plastic system in Germany, and have them used for the projects from different regions even under hot weather such as Philippines, Panama and Middle East etc. According to our customers’ feedback, they look pretty satisfied.

Now the plastic formwork price is affordable, if you have needs, please contact us.

Slab Flex 20 Formwork, Guatemala(2023年01月29日)

teconform — 2023-01-29T18:31:00+0900

https://www.teconform.com/slab-flex-20-formwork-guatemala.html

Slab Flex 20 Formwork, Guatemala
Country：Guatemala
Flex System Formwork：Slab Flex 20

Teconform offers concrete formwork (shuttering) and scaffolding for projects worldwide with many years of experience in dealing with contractors, builders & architects. We are one of the leading formwork manufacturers and suppliers of concrete shuttering formwork scaffolding engineering from China.

Security Measures When Using Table Formwork(2023年01月29日)

teconform — 2023-01-29T18:30:05+0900

https://www.teconform.com/security-measures-when-using-table-formwork.html

Security Measures of Using Table Formwork
(1) It is best to perform a pressure test for assembled table formwork units.

(2) After the platform mold is in place, a guardrail should be set on the outside of the platform mold. The height can be determined according to requirements, but it should not be less than 1.2m. A safety net must be installed on the outside of the platform and the guardrail on the floor must be installed at the same time.

(3) Before concrete pouring, all props should be supported and the concrete pouring must be strictly controlled. Pouring should not be too much or too concentrated, and accounting should be made when necessary.

(4) When raising and lowering the table formwork, unified command should be adopted, the steps should be consistent, and the signal should be clear. It is best to use a walkie-talkie to communicate. All operators must be specially trained to operate.

(5) The division of work between upper and lower signals should be clear. The signalman below can be responsible for signals such as the launch of the table formwork china, control of the ground rollers, hanging safety ropes and hooks, removal of the safety rope and lifting; the signalman above can be responsible for the adjustment of the balance spreader, the signal of the table formwork in place and hook removal.

(6) When the table formwork uses the ground roller to exit, the front roller should be 1 ~ 2cm higher than the rear roller to prevent the table die from sliding outward. The method of plotting the center of gravity of the table formwork beside the table formwork may be adopted. It is strictly forbidden to tilt the table formwork outwards before the outer hanging points are hooked.

(7) When the table formwork is extrapolated, the safety rope must be hung and controlled by a special person. The safety rope should be loosened slowly, and one end of it should be fixed to a reliable part of the building.

(8) Hook workers must fasten their seat belts and hang them on the embedded parts of the upper layer when operating on the table formwork. When hooking workers, do not wear plastic shoes or hard-soled shoes to prevent falls and fall injuries.

(9) No one is allowed to stand on the table formwork when it is being lifted. Personnel operating electric balance spreaders should also stand on the floor. To wait for the table formwork to be fully balanced before lifting, the tower crane’s boom must be slow, and tilting of the formwork is not allowed.

(10) When there is a strong wind or rain over fifth grade, the lifting work of the table formwork should be stopped.

(11) When lifting the formwork, a safety snap ring must be used, and no hook is allowed. When lifting, all the accessories of the table formwork should be fixed in advance, and no free materials should be stored on the table formwork. To prevent injuries caused by falling objects.

(12) When the table formwork is ejected, a safety net must be set in the lower layer. In particular, when using the roller to eject the formwork, care should be taken to prevent the roller from falling.

(13) When using electric welding on the surface of plywood, the asbestos cloth should be placed around the welding point, and the fire extinguishing type should be eliminated after welding.

(14) After a certain stage of construction, the formwork should be carefully checked for damage to all parts, and all fasteners should be reinforced at the same time.

Hope these tips will help a little bit when your site using table formwork system, usually we TEOCN will send our engineers to the site to help our customers assemble formwork systems and teach the workers how to work safely in each process if you like to order from TECON, no worry for the site use.

Any questions please feel free to contact us, we will always right here waiting for you.

Residential & Commercial Formwork(2023年01月29日)

teconform — 2023-01-29T18:29:27+0900

https://www.teconform.com/residential-commercial-formwork.html

For multi-storey buildings both residential and commercial, reasonable design and cost savings are crucial factors. For each building, we provide the most suitable formwork solution. You could ask us about the solution to your next project. Most functional high-rise or low-rise buildings have regular shapes and repetitive geometric figures. The short cycle construction is feasible because of the selected correct types of formwork systems and the obtained optimum on-site support, including ceiling formwork, concrete floor formwork, etc.

The Advantages of TECON Residential & Commercial Formwork
TECON residential formwork and commercial formwork solutions are always oriented to the interests of customers, and build all the structures that customers need on the basis of safety, speed, and economy. We always adhere to three principles: Solid solutions for a solid base, flexible solutions for varying room heights, and using efficient solutions to gain height faster. Whether you are looking for lightweight or crane-assist formwork, we can satisfy you with different cost ranges.

Affordable & High Residential & Commercial Formwork Solution
TECON formwork is firmly committed to providing you with real added value when developing the formwork concept that best suits your situation. These added values will be reflected in the optimal construction process, cost control, and high level of site safety.

What Should Be Paid Attention to In The Process of Demolding of Common Building Formworks?(2022年12月29日)

teconform — 2022-12-29T12:45:28+0900

https://www.teconform.com/products/formwork/

What Should Be Paid Attention to In The Process of Demolding of Common Building Formworks?
As we all know, building formwork plays a pivotal role in the process of engineering construction, because it can effectively ensure the safety of construction, so what should we pay attention to in the process of demolding of building formwork?

1 Building formwork demolding time
The demolition of the building formwork shall be based on the compressive strength report of the concrete test block under the same conditions, and then the application form for demolition shall be filled in, signed by the professional foreman and the project technical person, and submitted to the supervisor for approval before it becomes effective.

Side form: The side form can be removed only after the concrete strength can ensure that the surface edges and corners are not damaged due to the removal of the building formwork.

Bottom form: The bottom form can only be removed after the concrete strength of the component with a span greater than 8m reaches 100% of the design strength. The bottom form can be removed only after the strength of the concrete with a span of less than 8m reaches 75% of the design strength. The dismantling of the pre-stressed part is to be demolished after the concrete strength and pre-stress required by the design are reached.

2 Dismantling order of building formwork
The order of dismantling the building formwork is opposite to the order of installation. The order of installation is to support first and then to dismantle, and the order of formwork removal is to dismantle after support. That is, the non-load-bearing building formwork is removed first, and the load-bearing building formwork is removed later. The vertical wall construction formwork is removed first, and the horizontal wall construction formwork is removed later. The outer wall construction formwork is removed first, and the inner wall construction formwork is removed later.

3 Building formwork demolding construction
（1）Removal of beam slab: first loosen the upper adjustable support of the support to separate the keel from the building formwork, and lower the keel to the horizontal tie rod, and then remove all the attachments of the building formwork on the side. Then use the iron drill to move the building formwork, so that the building formwork is lowered and supported by the keel, and the building formwork and the keel are removed.

（2）The beam and column molds can be removed only when the surface is not damaged. First, remove the diagonal brace, then remove the building formwork and the opposite bolts and accessories, and then gently pry the building formwork with a crowbar to separate it from the concrete.

（3）When removing the building formwork, clean up the adhesive in time, apply the release agent, and stack it neatly. The dismantled components shall be managed in a centralized and unified manner in time, and corresponding protective treatment shall be applied.

（4） When removing the building formwork, the operator should stand in a safe place. When removing the lower support of the beam with a larger span, start from the middle of the span and remove it to both ends.

4 Notes for removing the support system
(1) Before dismantling, check whether the fastener connections of the support system and the support system meet the safety requirements.

(2) Remove the debris and obstacles on the ground before removing the support.

(3) Demolition should be carried out layer by layer from top to bottom, and simultaneous top and bottom operations are strictly prohibited. The horizontal rod should be removed layer by layer following the vertical rod.

5 Management measures
(1) Before installing the roof frame and building formwork, the team should make a comprehensive technical safety report, and make a detailed technical report on the installation method, installation sequence, technical standards, quality and safety requirements, etc.

(2) During the installation of the roof, temporary measures to prevent overturning should be provided, and it should be fixed after installation and verification of correctness.

If you want to know more details of steel shuttering for sale, please contact us.

Steel Formwork VS Wooden Formwork(2022年12月29日)

teconform — 2022-12-29T12:44:49+0900

https://www.teconform.com/products/steel-formwork/

Steel Formwork VS Wooden Formwork
Some building formworks are often used in some large-scale projects, and these building formworks can often play a good supporting and fixing role. There are many types of formwork materials on the market, and companies often need to compare different formworks to make a better choice. Next, let's take a look at the difference between steel formwork and wooden formwork.

1. What is steel formwork? And what is wooden formwork?
From the material point of view, the steel formwork is made of steel and the wood formwork is made of wood. Steel formwork for concrete is generally made according to the modulus size. After the concrete is demolished, the concrete surface is still relatively smooth and beautiful. The steel formwork can be placed before or after the installation of the reinforcement. The steel formwork is placed before the steel bars are installed, which is convenient and easy to place and install. It can visually monitor the concrete pouring process, thereby reducing the risk of pores and honeycomb structures. The commonly used wooden formwork is nine plywood, mirror panel, and bamboo plywood. It is more convenient to use, and it is generally used on some special-shaped concrete components because it is easier to cut and make.

2. Advantages of steel formwork and wooden formwork
Due to the difference in nature, metal shuttering for concrete and wooden formwork have different advantages.

(1) Steel formwork

a. The formwork has low adsorption force and easy demolding.

b. Partially damaged surfaces are repaired on-site, and the surface can be turned over for use after one side is worn.

c. There are many turnover times, generally 50 times or more.

d. Easy to do thermal insulation treatment, which is beneficial to the thermal insulation of concrete in winter.

(2) Wooden formwork

a. Easy to process and can be processed and shaped at will according to the specific geometry of the component.

b. Easy to purchase which is a small one-time investment.

c. It is relatively light, and construction is convenient. It also has the lowest cost.

If you have needs to buy any slab shuttering material, please leave us a message.

Comparison and Analysis of Common Formwork Types in Construction Engineering(2022年12月29日)

teconform — 2022-12-29T12:44:19+0900

https://www.teconform.com/products/plastic-formwork/

Comparison and Analysis of Common Formwork Types in Construction Engineering
In recent years, the construction industry has developed rapidly, which has brought a larger and more diversified use of building formworks. Nowadays, building formworks can be divided into the following formwork types.

1. Steel formwork
Steel formwork can be divided into small steel formwork and large steel formwork. The average weight of the small steel mold is about 50-60kg/m2, and mechanical equipment must be used for hoisting. There are also more seams when used, so the frequency of use in existing projects has decreased. The average weight of the large steel mold can reach more than 100kg/m2, and it is completely dependent on mechanical hoisting in use. The advantage is that there are fewer splicing joints and the overall flatness of the concrete is high. The steel formwork needs to be actively maintained during on-site use, or the surface quality of the concrete will be greatly affected. Large steel molds have good applicability in large-format projects with good hoisting conditions at the construction site, such as subway side walls, bridge piers and other structures.

2. Aluminum alloy formwork
The average weight of the aluminum alloy formwork is about 25kg/m2, which can be handled manually. The formwork is characterized by good processing performance and a complete construction system. In the construction of high-rise buildings, the early demolition process effectively speeds up the turnover efficiency of the roof formwork and reduces the input amount of the roof formwork. After the aluminum alloy formwork is processed by the surface treatment process, the oxidation reaction with the concrete is isolated, and a better concrete forming effect can be achieved. However, its disadvantage is that due to the price of raw materials, the unit price of the product is much higher than other formworks, so this formwork is only suitable for construction projects with a large number of turnovers, simple structure and less variable cross-section. It is especially suitable for high-rise residential formwork projects with simple facades, no changes/fewer changes between floors, and high turnover. For projects such as pipe corridors and underpass tunnels with simple structures, although the proportion of standard slabs is high, the construction period is much longer than that of housing construction projects. Therefore, it will greatly extend the payment cycle of the formwork, so it should be carefully selected.

3. Plastic formwork
Plastic formwork is a series of plastic plates with thermoplastic rigid plastic as the main base material, which can be divided into hollow plastic formwork, sandwich plastic formwork and ribbed plastic formwork. The advantages of the hollow plastic formwork are easy to use and good on-site processing performance. But its disadvantage is that the thermal deformation is large, and it is prone to warping and deformation in high-temperature weather. Plastic ribbed formwork is a new type of reinforced plastic formwork that has emerged in recent years. When making the formwork, the back rib design improves the stress structure of the formwork and improves the overall performance of the formwork.

As one of formwork accessories suppliers, we have types of formwork for sale, if you have needs, please contact us.

Causes of Deformation of Building Formwork and Remedial Measures(2022年12月29日)

teconform — 2022-12-29T12:43:47+0900

https://www.teconform.com/products/beam-slab-formwork/

Causes of Deformation of Building Formwork and Remedial Measures
1. Causes of deformation of building formwork are as follows:
(1) The support spacing between building formworks is too large, and the rigidity of the steel plate is poor;

(2) When assembling small steel formwork, it is not set and operated according to regulations, resulting in the poor overall performance of the building;

(3) The speed of pouring wall and column concrete is too fast, the height of one-time pouring is too high, and the vibration is excessive;

(4) The foundation on which the building formwork is placed is not firm, resulting in the formwork not being laid flat and poor waterproof measures. So it caused the foundation to sink;

(5) The construction site adopts a wooden building formwork or plywood construction, and the concrete is not poured in time after passing the experience. Long-term sun and rain cause varying degrees of deformation of the building formwork surface;

(6) The construction personnel did not operate properly when assembling the formwork.

2. The main remedial measures for buliding formwork are as follows:
(1) When assembling the small metal formwork, the connecting parts should be placed and operated according to the regulations, and the spacing and specifications of the purlin and the tension bolts should be set according to the design requirements.

(2) When using wooden building formworks and plywood building formworks, the concrete should be poured in time after the acceptance is passed to prevent the wooden building formworks from being deformed by long-term exposure to the sun and rain.

(3) For cast-in-place reinforced concrete slab and beam formwork with a span of not less than 4 meters, the construction formwork should be arched according to the design requirements. When the design has no specific requirements, the arching height should be one-thousandth to five-thousandths of the span.

(4) In the design of building formwork and support system, full consideration should be given to its own weight, construction load, and the self-sufficiency of concrete and the lateral pressure generated during pouring to ensure that the building modular slab formwork and support have sufficient bearing capacity, stiffness, and stability.

(5) The spacing between the beam bottom supports should be able to ensure that no deformation occurs under the action of the concrete weight and construction load. If the bottom of the support is a mud foundation, it should be tamped carefully, set up a drainage ditch, and lay long skids or section steel to ensure that the support does not sink.

Usage and Maintenance of Building Formwork(2022年12月29日)

teconform — 2022-12-29T12:42:57+0900

https://www.teconform.com/high-rise-formwork.html

Usage and Maintenance of Building Formwork
Appropriate maintenance and correct use of building formworks can not only extend the life span but also reduce a lot of unnecessary troubles for the construction project. So how can we extend the service life of building formworks?

Ⅰ. The formwork must be covered during transportation.
When transporting the building aluminium column formwork, it should be noted that a transport tool with a better shielding effect should be selected. Or it can be covered with plastic cloth or thin felt to avoid the sun and rain during transportation and prevent the building formwork from being severely deformed in a short time due to the natural environment.

Ⅱ. Place the building formwork neatly after unloaded to prevent sun and rain.
After unloading the truck, the formwork should be neatly stacked on the flat ground. It should be noted that the board surface should not be in direct contact with the ground, and wood should be used to separate it layer by layer to keep the formwork ventilated. At the same time, pay attention to a shelter to prevent sun and rain. In addition, to prevent the aging of the film on the surface of the building formwork, it is necessary to avoid exposure to sunlight. If the storage environment is humid, remove the outer packaging and packing belt of the formwork to avoid deformation. During the second handling, repack and bundle to avoid losses and accidents caused by slipping.

Ⅲ. Matters needing attention in building formwork cutting, sawing, nailing, and punching.
When using a building formwork for the first time, an alloy saw blade with more than 100 teeth and a sawing machine with track should be used when the formwork is cut. If you need building formworks of different shapes and sizes, use a portable electric saw for cutting. In addition, when nailing or drilling holes in the formwork, a wooden square must be placed under the formwork to prevent splitting on the back of the formwork due to suspension. The edges of all factory formworks are sealed with edge-sealing paint to reduce water penetration. After cutting and perforating on-site, all cutting edges and the edges of holes should be coated with suitable waterproof paint to prevent the formwork from deforming and cracking due to water absorption.

Ⅳ. The life of the building formwork is related to the quality of the formwork itself and the quality of the operators.
80% of the damage to the building formwork occurred during the demolding process. Therefore, you should confirm the time for demolding. It is strictly forbidden to dismantle it brutally. Try to catch the demolished formwork by hand to avoid a single corner landing.

Advantages of Building Formwork.(2022年12月29日)

teconform — 2022-12-29T12:42:22+0900

https://www.teconform.com/

Advantages of Building Formwork.
Ⅰ. What is a building formwork
Building formworks have a wide range of applications in people's daily lives and can be seen everywhere. The building formwork is a temporary supporting structure. It is made according to the design requirements so that the concrete structure and components are formed according to the specified position and geometric size, maintain their correct position, and bear the weight of the building formwork and the external load acting on it. The purpose of building formwork projects is often to ensure the quality and safety of concrete projects, speed up construction progress and reduce project costs.

Ⅱ. Eight advantages of building formwork
As a widely used building material, building formwork has eight irreplaceable advantages.

(1) Smooth and clean. The formwork is tightly spliced and smooth, and the surface and smoothness of the concrete structure after demolding exceed the technical requirements of the existing clear water formwork. No need for secondary plastering, saving labor and materials.

(2) Lightweight and easy to install. Lightweight and strong process adaptability. It can be sawed, planed, drilled, nailed, and can be formed into any geometric shape at will to meet the needs of various shapes of building support.

(3) Easy demolding. The concrete does not stick to the board surface. No need for a release agent, easy demolding, and easy dust removal.

(4) Stable and weather resistant. High mechanical strength, no shrinkage, no swelling, no cracking, no deformation, no deformation, size stability, alkali and corrosion resistance, flame retardant and waterproof, resistant to rodents and insects under the temperature conditions of -20℃ to +60℃.

(5) Conducive to maintenance. The formwork does not absorb water and does not require special maintenance or storage.

(6) Strong variability. Types, shapes, and specifications can be customized according to the requirements of construction projects.

(7) Reduce costs. There are many turnover times, the turnover of the plane mold is not less than 30 times, and the column beam mold is not less than 40 times, so the use cost is low.

(8) Energy-saving and environmentally-friendly. All scraps and used formworks can be recycled, with zero waste discharge.

Suzhou TECON Construction Technology Co., Ltd is a professional exporter of building formwork & scaffolding. Relying on the team's many years of industry experience, and strict selection and management of suppliers, we have been committed to providing customers with more efficient program design, more reliable product quality, and more professional and timely pre-sales and after-sales services. I believe that in our company you can find the most suitable building formwork for your needs.

If you want to know more materials of shuttering in civil engineering, please visit our website.

Assembly And Disassembly of Bridge Formwork(2022年12月29日)

teconform — 2022-12-29T12:41:45+0900

https://www.teconform.com/products/steel-formwork/

Assembly And Disassembly of Bridge Formwork
Ⅰ. Assembly of bridge formwork
When assembling the bridge formwork, especially when shaping the bridge steel formwork, we need to pay attention to the following issues:

(1) All components of the table formwork construction system are complete and firmly connected. The assembled formwork should be placed neatly according to its structural characteristics to ensure stability.

(2) Professional technicians must be arranged for technical guidance on the assembly site.

(3) Before assembling the formwork, check the components of the formwork system and inspect the appearance. Components with serious defects, bumps, deformation, etc. shall not be used.

(4) Steel bridge formwork is used for concrete pouring and molding. Metal formwork is widely used in construction projects due to its multiple-use and beautiful appearance of concrete pouring. During the installation and use of bridge steel formwork, we must assemble in accordance with regulations to ensure effective work.

Ⅱ. Disassembly of bridge formwork
When disassembling the bridge formwork, we should pay attention to the following items:

(1) The internal mold with reserved holes (that is, the drawing pipe) should be removed when the concrete strength can ensure that the surface does not collapse or crack. The pull-out time should be determined through experiments, and the compressive strength of concrete should reach 0.8MP.

(2) When the box girder is removed from the outer mold and the inner end, it must wait for the strength of the beam body to reach 60% of the design strength, that is, 30Mpa, before the mold removal operation can be carried out. In addition, the temperature difference between the surface concrete and the environment is not more than 15°C.

(3) Regarding the time for demolding of concrete, in addition to the strength of concrete when demolding, the temperature of concrete should also be considered. The temperature (caused by the heat of hydration of the cement) should not be too high, so as to prevent the concrete from falling too fast and cracking when it contacts the air, and it is not allowed to pour cold water for curing at this time. Before the temperature inside the concrete starts to cool down and when the temperature inside the concrete is high, the mold shall not be removed.

(4) The dismantling of the form shall be carried out in the reverse direction of the erecting form, and shall not damage the concrete so as to reduce the damage of the formwork. After the formwork is separated from the concrete, the formwork can be disassembled and lifted.

(5) The demolition of the bridge formwork should be carried out in the order of design, and it is strictly forbidden to throw away the formwork during demolition.

(6) After the formwork is removed, it should be repaired and sorted, and stored properly.

What Should Be Paid Attention to In The Process of Demolding of Common Building Formworks?(2022年09月26日)

teconform — 2022-09-26T16:09:05+0900

https://www.teconform.com/what-should-be-paid-attention-to-in-the-process-of-demolding-of-common-building-formworks.html

Side form: The side form can be removed only after the concrete strength can ensure that the surface edges and corners are not damaged due to the removal of the building formwork.

4 Notes for removing the support system
(1) Before dismantling, check whether the fastener connections of the support system and the support system meet the safety requirements.

(2) Remove the debris and obstacles on the ground before removing the support.

(2) During the installation of the roof, temporary measures to prevent overturning should be provided, and it should be fixed after installation and verification of correctness.

If you want to know more details of steel shuttering for sale, please contact us.

Steel Formwork VS Wooden Formwork(2022年09月26日)

teconform — 2022-09-26T16:08:23+0900

https://www.teconform.com/steel-formwork-vs-wooden-formwork.html

2. Advantages of steel formwork and wooden formwork
Due to the difference in nature, metal shuttering for concrete and wooden formwork have different advantages.

(1) Steel formwork

a. The formwork has low adsorption force and easy demolding.

b. Partially damaged surfaces are repaired on-site, and the surface can be turned over for use after one side is worn.

c. There are many turnover times, generally 50 times or more.

d. Easy to do thermal insulation treatment, which is beneficial to the thermal insulation of concrete in winter.

(2) Wooden formwork

a. Easy to process and can be processed and shaped at will according to the specific geometry of the component.

b. Easy to purchase which is a small one-time investment.

c. It is relatively light, and construction is convenient. It also has the lowest cost.

If you have needs to buy any slab shuttering material, please leave us a message.

Comparison and Analysis of Common Formwork Types in Construction Engineering(2022年09月26日)

teconform — 2022-09-26T16:07:41+0900

https://www.teconform.com/comparison-and-analysis-of-common-formwork-types-in-construction-engineering.html

As one of formwork accessories suppliers, we have types of formwork for sale, if you have needs, please contact us.

Causes of Deformation of Building Formwork and Remedial Measures(2022年09月26日)

teconform — 2022-09-26T16:07:01+0900

https://www.teconform.com/causes-of-deformation-of-building-formwork-and-remedial-measures.html

(2) When assembling small steel formwork, it is not set and operated according to regulations, resulting in the poor overall performance of the building;

(3) The speed of pouring wall and column concrete is too fast, the height of one-time pouring is too high, and the vibration is excessive;

(4) The foundation on which the building formwork is placed is not firm, resulting in the formwork not being laid flat and poor waterproof measures. So it caused the foundation to sink;

(6) The construction personnel did not operate properly when assembling the formwork.

Usage and Maintenance of Building Formwork(2022年09月26日)

teconform — 2022-09-26T16:06:26+0900

https://www.teconform.com/usage-and-maintenance-of-building-formwork.html

Advantages of Building Formwork.(2022年09月26日)

teconform — 2022-09-26T15:54:37+0900

https://www.teconform.com/advantages-of-building-formwork.html

Ⅱ. Eight advantages of building formwork
As a widely used building material, building formwork has eight irreplaceable advantages.

(3) Easy demolding. The concrete does not stick to the board surface. No need for a release agent, easy demolding, and easy dust removal.

(5) Conducive to maintenance. The formwork does not absorb water and does not require special maintenance or storage.

(6) Strong variability. Types, shapes, and specifications can be customized according to the requirements of construction projects.

(7) Reduce costs. There are many turnover times, the turnover of the plane mold is not less than 30 times, and the column beam mold is not less than 40 times, so the use cost is low.

(8) Energy-saving and environmentally-friendly. All scraps and used formworks can be recycled, with zero waste discharge.

If you want to know more materials of shuttering in civil engineering, please visit our website.

Assembly And Disassembly of Bridge Formwork(2022年09月26日)

teconform — 2022-09-26T15:53:54+0900

https://www.teconform.com/assembly-and-disassembly-of-bridge-formwork.html

(2) Professional technicians must be arranged for technical guidance on the assembly site.

(3) Before assembling the formwork, check the components of the formwork system and inspect the appearance. Components with serious defects, bumps, deformation, etc. shall not be used.

Ⅱ. Disassembly of bridge formwork
When disassembling the bridge formwork, we should pay attention to the following items:

(5) The demolition of the bridge formwork should be carried out in the order of design, and it is strictly forbidden to throw away the formwork during demolition.

(6) After the formwork is removed, it should be repaired and sorted, and stored properly.

Tunnel Formwork(2022年05月26日)

teconform — 2022-05-26T13:49:13+0900

https://www.teconform.com/tunnel-formwork.html

Tunnel Formwork
Tunnel formwork is a thriving business in the globe. This development is driven by strong growth in private transport and exponential growth in the commodity and relevant industries, which hope to reach every corner of the world as soon as possible.

Affordable Tunnel Formwork Solution
The main criteria for selecting construction type and load-bearing structures are tunnel shuttering and its length. In addition, there are curves and inclinations associated with objects along the tunnel, as well as geometric shapes of clear width and height to consider. A well-prepared proposal including cost and planning will be submitted to you as soon as we get your inquiries.

Tunnel Formwork
Tunnel form concrete building structures system is a thriving business in the globe. This development is driven by strong growth in private transport and exponential growth in the commodity and relevant industries, which hope to reach every corner of the world as soon as possible.

The Advantages of Teconform Tunnel Formwork
Here are four types of tunnel slab formwork construction trolley provided by TECON: Tunnel lining trolley, Waterproof board trolley, Cable trench lining formwork, Tunnel Invert Trestle.

Complete Your Construction with TECON Formwork & Scaffolding Solutions

TECON Single Side Wall Formwork
TECON single side formwork or SSF is a standard formwork supporting bracket system.

Shoring Tower TST60
TECON Shoring Tower TST60 is the fast assembly and cost-effective supporting frame system ...

The Concept of Building Formwork(2022年05月26日)

teconform — 2022-05-26T13:48:43+0900

https://www.teconform.com/the-concept-of-building-workform.html

The Concept of Building Formwork
The building formwork used for the construction of cast-in-place concrete structure is mainly composed of three parts: panel, supporting structure, and connecting parts. The panel is a bearing plate that directly contacts the newly poured concrete. The supporting structure is a temporary structure supporting the faceplate, concrete, and construction load, ensuring that the template structure of the building is firmly combined without deformation or destruction. The connecting parts are components that connect the panel and the supporting structure as a whole.

Suzhou TECON Construction Technology Co., Ltd is a Chinese concrete formwork supplier that provides professional lightweight formwork. Welcome to purchase our products.

If you want to know more about shuttering work for slab, please leave us a message.

The Best Time to Order Your Favorite Plastic Formwork TP60+ in Bulk Quantity with Discounted Price(2022年05月26日)

teconform — 2022-05-26T13:48:16+0900

https://www.teconform.com/the-best-time-to-order-your-favorite-plastic-formwork-tp60-in-bulk-quantity-with-discounted-price.html

The Best Time to Order Your Favorite Plastic Formwork TP60+ in Bulk Quantity with Discounted Price
TECON Plastic Formwork TP60+, is a new material formwork system made from ABS from Korea. Thanks to the light weight panels and fast lock handles, it provides project sites with the most convenient and efficient forming solution ever.

Now the plastic formwork price is affordable,anything you need, please contact us.

As one of the leading specialists in formwork civil engineering and scaffolding engineering, our wide range of off-the-shelf and customized products ensure that we can provide solutions for your construction projects, regardless of size or location.

Slab Flex 20 Formwork, Guatemala(2022年05月26日)

teconform — 2022-05-26T13:47:40+0900

https://www.teconform.com/slab-flex-20-formwork-guatemala.html

Slab Flex 20 Formwork, Guatemala

Country：Guatemala

System formwork：Slab Flex 20

Slab Flex 20
Complete Your Construction with TECON Formwork & Scaffolding Solutions
Slab Flex 20 Formwork
TECON Slab Flex System Formwork is the most flexible slab formwork. It's highly optimum for mu...

If you want to know more details of house slab formwork, please visit our website.

Security Measures When Using Table Formwork(2022年05月26日)

teconform — 2022-05-26T13:47:11+0900

https://www.teconform.com/security-measures-when-using-table-formwork.html

Security Measures When Using Table Formwork
Security Measures of Using Table Formwork
(1) It is best to perform a pressure test for assembled table formwork units.

(4) When raising and lowering the table formwork system, unified command should be adopted, the steps should be consistent, and the signal should be clear. It is best to use a walkie-talkie to communicate. All operators must be specially trained to operate.

(5) The division of work between upper and lower signals should be clear. The signalman below can be responsible for signals such as the launch of the table formwork, control of the ground rollers, hanging safety ropes and hooks, removal of the safety rope and lifting; the signalman above can be responsible for the adjustment of the balance spreader, the signal of the table formwork in place and hook removal.

(10) When there is a strong wind or rain over fifth grade, the lifting work of the table formwork should be stopped.

(13) When using electric welding on the surface of plywood, the asbestos cloth should be placed around the welding point, and the fire extinguishing type should be eliminated after welding.

(14) After a certain stage of construction, the formwork should be carefully checked for damage to all parts, and all fasteners should be reinforced at the same time.

Any questions please feel free to contact us, we will always right here waiting for you.

Residential & Commercial Formwork(2022年05月26日)

teconform — 2022-05-26T13:46:37+0900

https://www.teconform.com/residential-commercial-formwork.html

Residential & Commercial Formwork
For multi-storey buildings both residential and commercial, reasonable design and cost savings are crucial factors. For each building, we provide the most suitable residential formwork solution. You could ask us about the solution to your next project. Most functional high-rise or low-rise buildings have regular shapes and repetitive geometric figures. The short cycle construction is feasible because of the selected correct types of formwork systems and the obtained optimum on-site support, including ceiling formwork, concrete floor formwork, etc.

The Advantages of TECON Residential & Commercial Formwork
TECON residential and commercial formwork solutions are always oriented to the interests of customers, and build all the structures that customers need on the basis of safety, speed, and economy. We always adhere to three principles: Solid solutions for a solid base, flexible solutions for varying room heights, and using efficient solutions to gain height faster. Whether you are looking for lightweight or crane-assist formwork, we can satisfy you with different cost ranges.

Affordable & High Residential & Commercial Formwork Solution
TECON is firmly committed to providing you with real added value when developing the formwork concept that best suits your situation. These added values will be reflected in the optimal construction process, cost control, and high level of site safety.

Complete Your Construction with TECON Formwork & Scaffolding Solutions

TECON BASE 20 Wall Formwork
TECON BASE 20 is a universal wall formwork consisted by H20 timber beam, TECON-Form plywoo...

Slab Table Formwork
TECON Slab table formwork is one of the most efficient slab shuttering solution, especiall...

TECON HETO Frame Wall Formwork
TECON HETO frame is a steel frame panel system lined with 12mm film-faced-plywood.

TECON Alu Flex Formwork
TECON Aluflex formwork is a very high efficient and light weight slab formwork which saves...

Protection Screen
TECON Protection Screen is a modular designed facade protection system, automatic climbing...

If you want to know more types of slab shuttering work, please contact us.

What is Scaffolding and Types of Scaffolding(2021年)

teconform — 2021-11-18T18:57:11+0900

https://www.teconform.com/products/scaffolding/

We are one of the leading formwork accessories suppliers of concrete formwork scaffolding engineering from China. Our experienced technical team can tailor different engineered solutions according to your structural drawings, from typical residential & commercial formwork to various civil engineering projects such as dams, bridge pylon and tunnels and more.

On-site scaffolding has brought a lot of convenience to the construction. It is generally used in the decoration of external walls or interiors or in places with higher floors that cannot be directly constructed. Scaffolding is built on the periphery of the building on the construction site, which is not hard to see. Scaffolding is not only a built-in shelf, but also serves to facilitate workers to work up and down or to protect the external safety net and high-altitude installation of components and so on. Here are some types of scaffolding.

What is scaffolding and types of scaffolding
1. Fastener scaffolding: it is easy to dismantle and assemble, flexible to set up, mainly with large bearing capacity, which is economical and practical.

2. Portal steel-tube scaffolding: its size is relatively standardized in geometry, with good mechanical performance and high bearing capacity. It also has the characteristics of easy assembly and disassembly, time and labor-saving, safety and reliability, etc.

3. Bowl-buckling scaffolding: it has the advantages of multi-function, high efficiency, strong versatility, safety and reliability, and easy management. It is a construction tool with the widest scope.

4. Buckle scaffolding: it is easy to operate, flexible, safe, and reliable. The most important thing is that it is more convenient to transport and takes up less space.

5.Aluminum alloy scaffolding: Aluminum alloy scaffolding solves the problems of working at height for enterprises, it can be lapped according to the actually required height, with three height specifications. There are two kinds of width specifications, wide and narrow. The narrow scaffolding can be overlapped on a narrow ground, which is convenient and flexible. It is a good helper for working at heights, which can meet the requirements of working at heights in narrow spaces such as wall corners and stairs. In addition, it is easy and quick to install, equipped with high-strength casters, making it removable. The overall structure adopts the "building block" combination design, without any installation tools.

Requirements for Scaffolding Application(2021年)

teconform — 2021-11-18T18:56:40+0900

https://www.teconform.com/products/scaffolding/

Special requirements for scaffolding application in building construction

1. When it comes to construction scaffolding, the materials used in the construction of high-level scaffolding must meet the quality requirements.

2. The foundation of high-level scaffolding must be firm. It shall be calculated to meet the load requirements before erection, and be erected according to the construction specifications, and drainage measures shall be taken.

3. The technical requirements for scaffolding shall comply with relevant regulations.

4. Structural measures must be highly valued. Scissors braces and tie points should be set as required.

5. Horizontal closure: from the first step, every other step or two steps should be fully covered with the scaffold board or the scaffold fence. The scaffold board should be paved along the long direction, and the joints should be placed on the small crossbars overlapped. and the short board is strictly prohibited. The safety bottom fence shall be laid every four steps between the inner pole and the wall.

6. Vertical closure: from the second step to the fifth step, each step needs to set a 1.00m high protective railing and foot guard or protective net on the inside of the outer row of vertical poles. The protective rod (net) should be fastened with the upright rod. After the fifth step, all safety fences or safety nets shall be installed except for protective barriers. In the streets of densely populated areas, all safety fences or safety nets shall be set up from the second step.

7. The scaffolding shall be installed higher than the top of the building or the operating surface by more than 1.5m and shall be enclosed.

8. The steel pipes, fasteners, scaffold boards, and connection points on the scaffolding that have been erected cannot be removed at will. When it is necessary to be removed during construction, it must be approved by the person in charge of the construction site and effective measures must be taken. After the process is completed, it should be restored immediately.

9.Before using the construction scaffolding, the person in charge of the construction site shall organize the inspection and acceptance, pass the acceptance, and fill in the inspection form. During the construction process, there should be professional management, inspection, and warranty, and regular settlement observations should be taken. If abnormalities are found, reinforcement measures should be taken in time.

Application and Characteristics of Scaffolding(2021年)

teconform — 2021-11-18T18:56:03+0900

https://www.teconform.com/products/scaffolding/https://www.teconform.com/products/formwork/

Scaffolding refers to the various supports erected on the construction site to facilitate workers to operate and solve vertical and horizontal transportation. The general term for scaffolding in the construction industry refers to the supports erected on the construction site for external walls, interior decoration or places with high floor heights that cannot be directly constructed in order to facilitate the workers to work up and down or peripheral safety nets and high-altitude installation components. The materials for scaffolding are usually bamboo, wood, steel pipes, or synthetic materials. Some projects also use scaffolding as a template. In addition, they are also widely used in advertising, municipal administration, transportation, bridges, and mining. The application of scaffolding is different for different types of engineering construction. For example, buckle scaffolding is often used in bridge supports, and portal scaffolding is also used. Most of the floor scaffolding used in the construction of the main structure is fastener scaffolding.

Compared with the general structure, the working conditions of scaffold have the following characteristics:

1. The load variation is relatively large;

2. The fastener connection node is semi-rigid, and the size of the node rigidity is related to the fastener quality and installation quality, and the performance of the node has great variation;

3. There are initial defects in the scaffolding structure and components, such as the initial bending and corrosion of the members, the size error of the erection, the eccentricity of the load, etc;

4. The connection point with the wall is more restrictive to the scaffolding.

The research on the above problems lacks systematic accumulation and statistical data, and does not have the conditions for independent probabilistic analysis. So the value of the structural resistance multiplied by an adjustment factor of less than 1 is determined by calibration with the previously used safety factor. Therefore, the design method adopted in this code is essentially semi probabilistic and semi empirical. The basic condition of design and calculation is that the adjustable scaffolding meets the structural requirements in this specification.

Pay attention to safety during the use of scaffolding. It is strictly forbidden to play on the shelf to prevent accidents. Please keep in mind that work is important, safety and life are more important.

Suzhou TECON Construction Technology Co., Ltd is types of concrete formwork and various construction materials business, and provides professional information about what is scaffolding used for. Welcome to purchase our products.

Safety Technology of Formwork(2021年)

teconform — 2021-11-18T18:55:30+0900

https://www.teconform.com/products/steel-formwork/

TECON offers aluminium column formwork (shuttering) and scaffolding for projects worldwide with many years of experience in dealing with contractors, builders & architects.

The amount of steel, bamboo, and wood used in formwork construction in China is huge, and formwork construction is an important tool for the construction of concrete structures. Experts pointed out that in the cast-in-place concrete structure engineering, the formwork engineering generally accounts for 20%-30% of the cost of the concrete structure engineering, 30%-40% of the project labor, and about 50% of the construction period. Formwork technology directly affects the quality, cost, and benefit of engineering construction, so it is an important content to promote the progress of construction technology in China. With the development of the real estate industry and the continuous construction of various projects, the formwork industry has developed rapidly.

Precautions of Formwork Construction

① Before working, wear a safety helmet and check whether the tools used are firm. Tools such as wrenches must be hung on the body with a rope to prevent falling and hurting people. Concentrate on your work to avoid nail sticking and slipping in the air.

② For the installation and removal of formworks over 5 meters, scaffolding shall be erected, and protective railings shall be provided to prevent the operation from going up and down in the same vertical plane. Fasten the safety belt when working at heights.

③ Large quantities of formwork and other materials shall not be stacked on the scaffolding.

④ Practical safety measures shall be taken in advance for the installation and removal of formwork construction of high and complex structures. When the formwork is removed at a high place, a certain person shall be assigned to command and mark the working area below. When assembling and disassembling the combined steel formwork, the upper and lower parts shall be taken care of by people, with the assembling and disassembling. It is strictly forbidden to throw from a high place.

⑤ Supports, leading bars, etc. shall not be erected on the door and window frames and scaffolding. The diagonal brace and pull rod in the middle of the access road shall be set at the place with a height of more than 1.8 meters. In the process of formwork erection, if it is necessary to stop midway, the support, tie-in head, and column head plate shall be nailed firmly. During the interval of formwork removal, the movable formwork, traction bar, support, etc. shall be transported away or stacked properly.

⑥ A long crowbar is generally used to remove the formwork. No one is allowed to stand on the formwork being demolished. When removing the formwork, the whole formwork shall be prevented from falling to avoid personal injury.

⑦ If there is a reserved hole on the formwork, the hole shall be covered after installation. The reserved holes on the concrete slab shall be covered immediately after the formwork is removed.

⑧ Set up wires and use electric tools on the combined steel formwork, apply safety voltage below 36 volts, or take other effective safety measures.

Formwork Positioning(2021年)

teconform — 2021-11-18T18:54:52+0900

https://www.teconform.com/products/climbing-formwork/https://www.teconform.com/

TECON offers aluminium column formwork (shuttering) and scaffolding for projects worldwide with many years of experience in dealing with contractors, builders & architects.

The formwork system consists of two parts: formwork and support. A formwork is a model for forming a concrete structure or component. As a tool for forming concrete components, formwork itself should not only have the same shape and size as structural components, but also have enough strength and rigidity to bear the new concrete load and construction load. The support is a supporting formwork to ensure the shape, size and spatial position of the formwork. The supporting formwork should not only ensure that the shape, size and space position of the formwork are correct, but also bear all the loads transmitted from the formwork. The formwork system is composed of formwork, supporting parts and fasteners. It is required to ensure that the shape and size of the structure and components are accurate, with sufficient strength, rigidity and stability. It is required to be easy to install and disassemble and can be used many times. The joints are tight without leakage of grout. The commonly used formwork includes wood formwork, set combined formwork, large tool formwork, climbing formwork, sliding formwork, tunnel formwork, platform formwork (flying formwork, table formwork), and permanent formwork, etc.

When the bottom or top slab concrete has been poured and has a certain strength (≥ 1.2MPa), that is to say, if it is pressed by hand, it will not be soft and no traces, then people can start the axis line measurement. Set out the dimension line of wall column section position and the control line of formwork 500 according to the axis position, so as to facilitate the installation and correction of formwork. When the concrete is poured and the formwork is removed, start to measure the 500mm elevation control line of the floor, and direct the control line at the bottom of the slab to the top according to the 500mm line. First, introduce the control line of the main axis of the building according to the floor axis measurement hole, and take the control line as the starting point to lead out each axis. According to the axis and the construction drawing, use ink lines to pop up the inner line, side line and outer control line of the formwork. Three lines must be in place before construction. And this is what a formwork & scaffolding we need.

What is Scaffolding and Formwork(2021年)

teconform — 2021-11-18T18:54:03+0900

https://www.teconform.com/products/formwork/https://www.teconform.com/

TECON offers aluminium column formwork (shuttering) and scaffolding for projects worldwide with many years of experience in dealing with contractors, builders & architects.

Formwork is a model for the molding of newly poured concrete. The formwork system is composed of formwork, supporting parts and fasteners. The mold for the molding of concrete structure or reinforced concrete structure consists of panel and supporting system (including keel, truss, small beam, etc., as well as vertical supporting structure), connecting accessories (including bolts, connecting buckles, connecting parts and supporting members between the formwork surface and the supporting members). It is required to ensure that the shape and size of the structure and components are accurate, with sufficient strength, rigidity and know stability. It is required to be easy to install and dismantle, and it can be used many times, and the joints are tight without leakage. The formwork is divided into steel formwork, aluminum formwork, wood formwork and plastic plate according to the materials.

Scaffolding refers to all kinds of supports erected on the construction site for the operation of the workers and the solution of vertical and horizontal transportation. Scaffolding is used for construction to protect the safety of factory construction from the wall. Scaffolding is composed of steel pipes, fasteners and safety nets. It is a working platform set up to ensure the smooth construction process. According to the position of erection, it can be divided into external scaffolding and internal scaffolding. According to different materials, it can be divided into wood scaffolding, bamboo scaffolding and steel tube scaffolding. According to the structural form, it can be divided into pole scaffolding, bridge scaffolding, portal scaffolding, suspended scaffolding, hanging scaffolding, cantilever scaffolding and climbing scaffolding. You can also go to the construction site to find out that it belongs to the secondary component of the construction equipment.

Suzhou TECON Construction Technology Co., Ltd provides types of formwork for sale. If you want to know more about formwork & scaffolding, you are welcome to get more information through our website.

Tunnel Formwork(2021年10月25日)

teconform — 2021-10-20T11:40:13+0900

https://www.teconform.com/tunnel-formwork.html

Tunnel formwork system is a thriving business in the globe. This development is driven by strong growth in private transport and exponential growth in the commodity and relevant industries, which hope to reach every corner of the world as soon as possible.

The Advantages of Teconform Tunnel Formwork
Here are four types of tunnel construction formwork trolley provided by TECON: Tunnel lining trolley, Waterproof board trolley, Cable trench lining formwork, Tunnel Invert Trestle.

Affordable Tunnel Formwork Solution
The main criteria for selecting construction type and load-bearing structures are tunnel cross-section and its length. In addition, there are curves and inclinations associated with objects along the tunnel, as well as geometric shapes of clear width and height to consider. A well-prepared proposal including cost and planning will be submitted to you as soon as we get your inquiries.
If you want to know more details of tunnel form concrete building structures, please leave us a message, and let us serve you.
As a professional company,we produce various types of pvc column formwork,and we will try our best to meet your needs.

The Concept of Building Formwork(2021年10月24日)

teconform — 2021-10-20T11:39:42+0900

https://www.teconform.com/the-concept-of-building-workform.html

Suzhou TECON Construction Technology Co., Ltd is a Chinese concrete formwork supplier that provides professional lightweight formwork. Welcome to purchase our products.
If you have any doubts of our wall shuttering system,please visit ou r website and our employees with help you.

The Best Time to Order Your Favorite Plastic Formwork TP60+ in Bulk Quantity with Discounted Price(2021年10月23日)

teconform — 2021-10-20T11:39:07+0900

https://www.teconform.com/the-best-time-to-order-your-favorite-plastic-formwork-tp60-in-bulk-quantity-with-discounted-price.html

TECON Plastic Formwork TP60+, is a new material formwork system made from ABS from Korea. Thanks to the light weight panels and fast lock handles, it provides project sites with the most convenient and efficient forming solution ever.

It's similar with Peri DUO and GEO-plast System, and the biggest panel 1200*600mm only weights 11kg per piece. TECON Plastic Formwork TP60+ is widely used for wall, slab, shuttering for beam and column in modular houses. And we have test report of this plastic system in Germany, and have them used for the projects from different regions even under hot weather such as Philippines, Panama and Middle East etc. According to our customers’ feedback, they look pretty satisfied.

Contact us today for TECON's innovative, efficient, user-friendly system and its details.
Contact us for more information about plastic formwork price!