HANGZHOU METAL TECH I/E CO., LTD

Working Principle and Application of Wire Drawing Machine(2023年01月30日)

wiremachinecn — 2023-01-30T15:24:54+0900

https://www.wiremachinecn.com/working-principle-and-application-of-wire-drawing-machine.html

The overview of wire drawing plant for sale
Wire drawing machine is also known as drawing machine and wire drawer. It is a piece of common mechanical equipment in industrial application, which is widely used in machinery manufacturing, hardware processing, petrochemical industry, plastics, bamboo and wood products, wire and cable industry, and other industries. Metal Tech has been a manufacturer of wire drawing machines in china, inquiry now.

The working principle of wire drawing plant for sale
The raw wire is formed into the finished product through the fixed speed wheel group and drawing die, and then transported to the take-up wheel through the arranging guide wheel at a certain speed through the last fixed speed wheel. The wire drawing machine for sale is to ensure that there is a certain tension of the wire between the constant speed wheel and take-up wheel to complete the drawing process. The constant speed wheel set is driven by the main motor, the speed is determined by the product specification, and the linear speed is also certain. The linear speed of the take-up wheel increases with the increase of take-up reel diameter. In order to ensure a certain tension, that is, to keep the linear speed of wire feed and wire take-up consistent, it is necessary to continuously reduce the speed of the take-up wheel to ensure that the linear speed of the take-up wheel is constant. The speed regulation of the take-up wheel is realized by the speed regulating motor.

The application of drawing machine for sale
Wire drawing machine is common in industrial applications of mechanical equipment, which is widely used in machinery manufacturing, hardware processing, petrochemical, plastic, bamboo and wood products, wire and cable and other industries. Metal drawing machine is used for pre-processing of standard parts and other metal products; plastic drawing machine is a special complete set of equipment for deep processing of hollow, solid round or flat yarn with polyester, nylon, polyethylene, polypropylene and polyester chips as raw materials in plastic products industry; bamboo and wood drawing machine is special equipment for reprocessing the bamboo and wood thread in the bamboo and wood product industries such as making chopsticks, toothpicks, barbecue sticks.
Metal Tech's straight line wire drawing machine water drawing machine pointing machine for wire drawing automatic wire straightening and cutting machine are professional among many applications. Check if you have any interests.

Materials and technology of metal drawing machine
Metal Tech' s wire drawing machines for sale are available for many types of material, such as aluminium wire drawing machine, copper wire drawing machines and steel wire drawing machines. In addition, our wire drawing plant uses advanced processing technologies, bull block machine, high carbon wire drawing machine, scrubber wire drawing machine and intermediate wire drawing machine. Check more infomations via wire drawing machine pdf . Inquiry Metal Tech for wire drawing machine for sale.

As one of the wire drawing dies manufacturers, we provide barbed wire machine, drawing machine for sale, mesh wire making machine, etc. Want to know more, contact us.

Video(2023年01月30日)

wiremachinecn — 2023-01-30T15:24:25+0900

https://www.wiremachinecn.com/video/

Wheel Type Wire Drawing Machine
Wheel Type Wire Drawing Line
PVC Wire for Gabion
BRC Wire Mesh Welding Machine
Video of Barbed Wire Making Machine
Metal Tech Gabion Machine
Gabion Machine in Nepal
BRC Machine
Commissioning BRC
Working Video of Nail Making Machine-1
Working Video of Nail Making Machine 2
Wire Drawing Machine Introduction Video
BRC Machine (Wire Mesh Welding Machine)
Gabion Machine, Gabion Mesh Machine
How to Make Gabion Box

As one of the wire drawing dies manufacturers, we provide bull block wire drawing machine, drawing machine for sale, weld mesh manufacturing machine, etc. Want to know more about wire mesh machine video, contact us.

Selection Guide and Maintenance of Annealing Furnace(2023年01月30日)

wiremachinecn — 2023-01-30T15:23:23+0900

https://www.wiremachinecn.com/selection-guide-and-maintenance-of-annealing-furnace.html

Wire annealing furnace is a kind of metal heat treatment process in which the workpiece is heated to a predetermined temperature, keeps it warm for a certain period of time, and then slowly cools it down. Choose metal tech as your direct annealing furnace manufacturer.

Ⅰ. Types of annealing furnaces
According to the heat source classification, annealing furnace mainly includes electric annealing furnace , coal annealing furnace, oil annealing furnace,gas annealing furnace , coal gas annealing furnace,LPG wire annealing furnace and etc. Wire annealing furnace mainly includes trolley type annealing furnace, well type annealing furnace, box type annealing furnace, bell annealing furnace and continuous bright annealing furnace.

Ⅱ. The selection guide of annealing furnace for sale
Trolley type annealing furnace is widely used in the chemical industry, petroleum, food, metallurgy, machinery, light industry, electric power, shipping, papermaking, mining, medicine, central heating, and other industrial sectors. With the development of social productivity, its applications of in various industries are becoming more and more.

Ⅲ. The application of various wire annealing furnaces
Solution annealing furnace are as follows:
The application of well type annealing furnace: it is used for heat treatment of metal parts and rings at rated temperature.
The application of box annealing furnace: it is specially designed mainly used for quenching, normalizing, annealing and other conventional heat treatment of steel workpiece.
The bell type annealing furnace: it is mainly used for sheet annealing and normalizing of steel parts in natural atmosphere. Check for more bell annealing furnace process introductions.
The application of bright annealing furnace: it is used for continuous annealing of copper straight pipes (rods), annealing furnace steel pipes, aluminum pipes or coils of different specifications under controlled atmosphere.

Ⅳ. The maintenance of wire annealing furnace
The maintenance of a vacuum annealing furnace.
2. The user must always clean the iron oxide scraps and other stuffs in the wire annealing furnace . This work should be carried out at least once in two weeks.
3. The user should always inject the proper amount of engine oil into the rotating part of the wire annealing furnace bearing pedestal to ensure the flexible transmission of the rotating part.
4. If the heating element is used for a short time, it shall not be collided or twisted to avoid fracture.
5. After the electric annealing furnace has been used for a period of time, if the lining is slightly damaged (such as small cracks or falling off or loosening of refractory bricks), it can be repaired with mud.

As one of the wire drawing dies manufacturers, we provide bull block wire drawing machine, drawing machine for sale, weld mesh manufacturing machine, etc. Want to know more, contact us.

Wire Straightening and Cutting Machine for Sale(2023年01月30日)

wiremachinecn — 2023-01-30T15:22:32+0900

https://www.wiremachinecn.com/products/wire-straightening-and-cutting-machine/

Mesh straightening machine and cutting machine is working for a piece of straightened wire. The wire is using for the gabion net side, bordering with gabion net twists and ready for making a gabion box.
Metal Tech wire straightening machine for sale are designed with long wire track for 6 meters can match all demand of clients’ and the cost of it is very low and the lifetime usually can reach 7-8 years at least.
Get wire straightening and cutting machine price direct from wire straightening machine manufacturer, Inquiry now.

Specifications of automatic wire straightening and cutting machine
PartsWire straightening and cutting machine
Wire diameter2.2-4mm
Length cutting of wire3.5mm
Moving wire speed20m/minute
Power3KW
Size (L*W*H)5000×400×1000（mm）
Weight120kg

Advantages of Wire Straightening and Cutting Machine
Metal tech Wire straightening and cutting machine low cost, long lifetime, very easy for operating.

Advantages of Metal Tech Wire Straightening Machine Manufacturer
Metal Tech is a professional manufacture of wire straightening cutting machine, Our wire straightens and cut wire is made under strict inspection and of high quality. Wire straighten and cut wire machines adopt microcomputer control, automatic straightening, automatic cutting off. Easy to operate, simple to use. Small footprint, easy to disassemble and install. Computer storage memory, efficient and convenient. Smooth running, low failure rate, easy maintenance. The body of the comprehensive iron shell protection, the use of safer and more secure. Inquiry now, we will give you bulk wholesale wire straightening machine price.

How is Wire Straightening Cutting Machine Works?
The use of wire straightener and cutter processing cold-drawn steel wire can make the rust removal, straightening, cutting three processes completed in one go. The wire straightening machine is composed of a machine base, straightening device, traction device, cutting device, fixed-length mechanism, receiving material support and electric transmission mechanism. Its working principle is: one end of the steel wire placed on the plate frame is passed through the straightening cylinder driven by an electric motor. The cylinder is equipped with five sets of straightening blocks, of which three sets of straightening blocks have their center holes deviated from the rotation axis of the straightening cylinder. The wire is straightened by bending in different directions as it passes through the rotating barrel. The traction roller and the gear tool are driven by another motor. The traction roller pulls the wire through the slot in the gear tool. When its end touches the limit switch on the receiving bracket, the clutch circuit is turned on, so that the gear tool rotates 120 degrees down to fix the length of the steel bar, and the cut steel wire falls into the bracket.

Wire Straightener and Cutter Applications
Metal Tech wire straightening cutting machine is used to straighten and slice the metal wire such as iron wire, steel wire, aluminum wire, copper wire and other machinery and equipment of equal length. The wire straightener and cutter is composed of a straightening mechanism, feeding mechanism and wheel cutting mechanism. The machine can realize the function of no trace straightening, automatic feeding to measure the length, following the cut off, etc. Wire straightening cutting machine is widely used in hardware, machinery, electrical, instrumentation, construction and other industries. Wire straightening machine for sale, RFQ Now.

As one of the wire drawing dies manufacturers, we provide chain link fencing machine, drawing machine for sale, weld mesh manufacturing machine, etc. Want to know more, contact us.

Wire Drawing Die(2023年01月30日)

wiremachinecn — 2023-01-30T15:20:43+0900

https://www.wiremachinecn.com/products/wire-drawing-die/

Metal tech Wire drawing die (Mould) is a die for drawing metal wire. The center of the drawing die has a certain shape hole, round, square, octagonal or other special shape. When the metal is pulled through the die hole, the size becomes smaller and even the shape changes. We can configure different sizes according to customers' needs

Specifications of Wire Drawing Die
Raw Material of Drawing Die inner partTungsten alloy
Raw Material of Drawing Die outside partNormal Steel

Advantages of Wire Drawing Die
Metal Tech wire drawing die (mould) use high-quality material parts, strict quality management all these guarantee superior quality and long performance wire drawing die (mould) life.

After Sale Service of Wire Drawing Die
1.One set of every detail manual operation and maintenance
2.Installation and commissioning (point 7 in terms)
3.Training program (include training the factory operator and technical)
4.Installation and commissioning report with all the information which from the whole period

Terms of Wire Drawing Die
Delivery of Equipment: FOB China Port
Payment Terms: 40% By T/T in advance as down payment,
60% By T/T or Irrevocable Confirmed L/C at sight before Shipment
Delivery Time: Within 30-60 days after receipt of the down payment
Packing: with plastic film safety packing
Guarantee: 12 months after commissioning or 18months after shipment. Whichever first is in valid. (It is excluding wear parts. Shipping cost for parts to be replaced during warranty period has to be borne by the customer.)
Installation and Start-up: 1-2 technicians and 1 interpreter will be assigned to coordinate installation, commissioning and training, for the maximum duration of 15 working days, the buyer will supply the air return tickets, food, accommodation (hotel and one day three meals), transportation, communication, insurance, tax (if have) for the technicians and the interpreter. USD100.00/day/person working fee will be paid to them.

As one of the wire drawing dies manufacturers, we provide high speed nail making machine, drawing machine for sale, weld mesh manufacturing machine, etc. Want to know more, contact us.

Roofing Nail Making Machine(2023年01月30日)

wiremachinecn — 2023-01-30T15:20:12+0900

https://www.wiremachinecn.com/products/roofing-nail-making-machine/

Metal tech construction nail making machine can make steel wire into Roofing nails of different specifications. It has the characteristics of simple operation, high speed and low noise.

Specifications of Roofing Nail Making Machine
ModelWZ94-4C
Max. dia. of nail4.5mm
Min. dia. of nail2.8mm
Max. length of nail100mm
Min. length of nail50mm
Output220pcs/min
Power of motor380V, 3-phase,
50HZ, 4+0.75kw
Dimension200x150x200cm
Weight2600kg

Advantages of Roofing Nail Making Machine
Metal tech Roofing Nail Making Machine use high-quality material parts, strict quality management all these guarantee superior quality and long performance Roofing Nail Making Machine life.

As a steel wire drawing machine manufacturer, we provide wire nail making machines, drawing machine for sale, mesh wire making machine, etc. Want to know more, contact us.

Annealing Process of Bell type Annealing Furnace(2023年01月30日)

wiremachinecn — 2023-01-30T15:19:43+0900

https://www.wiremachinecn.com/annealing-process-of-belltype-annealing-furnace.html

Bell furnace annealing Generally Use Hydrogen Or Hydrogen-nitrogen Mixed Gas As The Protective Gas. Hydrogen Often Has Better Thermal Conductivity Than Hydrogen-nitrogen, And High-standard Hydrogen Has A Stronger Decarburization Ability Than Hydrogen-nitrogen. Also, The Surface Of The Strip Steel Treated By The Bell Type Annealing Furnace Using Hydrogen As The Protective Gas Has Less Carbon Slag Content And More Uniform Mechanical Properties. Therefore, The Use Of Full Hydrogen As A Protective Gas Has Been Commonly Used In Some Metallurgical Industries. So What Is The Bell Annealing Furnace Process? How Does A Hydrogen Annealing Furnace Complete The Annealing Treatment Of The Workpiece?

Bell Annealing Furnace Process
The Main Process Equipment Of The bell type furnace Includes The Annealing Furnace Stand With Supply Pipeline And Discharge Pipeline, Inner Cover, Heating Cover, Cooling Cover, Valve Station And So On. At The Beginning Of Annealing, The Steel Coils To Be Annealed Should Be Stacked On The Table, The Inner Cover Should Be Hoisted, And The Furnace Table, Inner Cover System And Hydrogen Inlet Valve Should Be Tested For Cold Sealing. After The Test Is Successful, A Nitrogen Purge Is Required, And The Heating Mantle Is Hoisted, And Then The Heating Mantle Is Ignited. When The Nitrogen Purge Meets The Conditions, It Is Necessary To Replace The Nitrogen In The Inner Cover With Hydrogen Purge. When The Heating Starts, The Heating Curve Should Be Selected According To Different Materials For Temperature Control Until The Temperature Of The Steel Coil Core Meets The Requirements Of The Process.

Annealing Treatment Of The Workpiece By The Bell Annealing Furnace
In The Working Process Of The Bell Type All-hydrogen Annealing Furnace, The Cooling Should Start From The Heating Mantle Still Above The Furnace Table. Firstly, The Air Is Blown Into The Heating Mantle, And Then The Heating Mantle Is Removed. Then The Cooling Cover Is Hoisted, And The Air From The Surrounding Environment Is Sucked By The Fan On The Cooling Cover To Cool The Inner Cover. When The Circulating Atmosphere Inside The Inner Cover Reaches The Set Temperature, The Cooling Cover Fan Should Stop Running. After A While, The Spray Cooling Starts. When The Temperature Of The Steel Coil Core Reaches The Set Value, The Cooling Ends, And The Cooling Cover Is Removed. Then, A Nitrogen Purge Is Performed To Replace The Hydrogen In The Inner Cover. Remove The Inner Cover, And Then Hoist The Steel Coil, So That A Bell Annealing Furnace Process.

The Metal Hydraulic Bell-type Annealing Furnace Is One Of The Heat Treatment Equipment In The Machinery Industry. That Is, The Wires Or Metal Parts Are Placed In Different Heating Furnaces, Slowly Heated To A Certain Temperature, And Maintained For A Period Of Time. Then Cool Down Them At An Appropriate Rate, Usually Is Natural Cooling, Sometimes Is Controlled Cooling. According To Different Energy Sources, Wire Annealing Furnace Nelectric Annealing Furnace, The Second Is Gas Energy Annealing Furnace And The Third Is Petroleum Energy Lpg Annealing Furnace. Users Can Choose According To Their Own Situations.

As a steel wire drawing machine manufacturer, we provide hexagonal wire mesh machine, drawing machine for sale, wire mesh manufacturing machine, etc. Want to know more details of types of annealing furnaces, contact us.

What Are the Materials of the Wire Drawing Die of the Wire Drawing Machine?(2022年10月26日)

wiremachinecn — 2022-10-26T15:41:23+0900

https://www.wiremachinecn.com/what-are-the-materials-of-the-wire-drawing-die-of-the-wire-drawing-machine.html

When using wire drawing machine to draw various metal wires, in order to ensure the quality of the drawn wires, we often need to use the tool - wire drawing die. The so-called wire drawing die is a kind of mold that a metal wire pass through and become thin, so as to become a certain size that people need. So, how much do you know about the drawing die materials of the wire drawing machine?

With the development of technology, there are several drawing dies made of different materials and more options for different users. If it is classified by materials, we can divide the wire drawing dies of the wire drawing machine into alloy steel dies, cemented carbide dies, polycrystalline diamond dies, natural diamond dies, CVD diamond dies and ceramic dies. These new materials expand the application scope of the drawing dies, and also prolong the service life of the drawing dies.

Introduction of Wire Drawing Die Materials
In order to help you better understand the wire drawing die, several wire drawing die materials will be selected for you to explain. First of all, we want to introduce the alloy steel die. This alloy steel wire drawing die appeared earlier than other kinds of materials, but due to its many shortcomings in working performance, it is not able to meet the needs of modern production, so it is gradually replaced by other wire drawing dies.

Then, let's take a look at cemented carbide drawing die that is widely used today. This kind of wire drawing die has many advantages. It not only has high wear resistance, but also has the advantages of small friction coefficient, low energy consumption and high corrosion resistance. Therefore, in comparison, the wire drawing die made of cemented carbide takes over more advantages and has excellent processing adaptability. It has gradually developed into a necessity for most industries.

In addition, there are many other wire drawing dies made of new materials. Of course, each material has its own characteristics and can meet different processing needs. For users, it is important to choose a drawing die for a drawing machine that suits their production needs. If you want to know which kinds of materials is the best for your production, never mind to contact Metal Tech to give you professional advice. As a Chinese steel wire drawing machine manufacturer, We do have quite rich experiences in choosing wire drawing die materials.

The Method of Wire Drawing Machine to Control Speed
It is difficult for a mechanical device to accurately control the speed, and it is even more difficult to ensure the smoothness of the linear speed. But for a wire drawing machine produced by Metal Tech, this is not a big problem. Because our wire drawing machine system has very high requirements for speed control. See how does it work?

The entire system of the rod drawing machine is relatively complex. The control equipment requires coordination between various motors. In order to achieve this purpose, four servo motors are used for the control to fully meet the real-time interaction between datas. In order to ensure that the track side lines according to the algorithm can be calculated quickly, there is a full use of the servo internal firmware functions. In this way, the calculation of the driver itself greatly omits the total time calculated by the line position of the traditional wire drawing machine control system. At the same time, the command can be sent to the driver to ensure the lining, tand hus greatly reducing the delay through the controller.

As a steel wire drawing machine manufacturer, we provide hexagonal wire mesh machine, drawing machine for sale, wire drawing machine for sale, etc. Want to know steel wire drawing machine price and wire drawing machine specification, contact us.

Nail Making Machine for Sale(2022年10月26日)

wiremachinecn — 2022-10-26T15:40:46+0900

https://www.wiremachinecn.com/products/nail-making-machine/

Nail making machine can make steel wire into nails of different specifications. As a professional high speed nail making machine manufacturers, Metal Tech offers fine metal nail making machine for sale to meet high standards of customers. Inquiry steel nail making machine price list directly from China factory.

Types of Metal Nail Making Machine
There are six types of steel nail making machine for sale, including high speed nail making machine, nail polishing machine, automatic nail making machine, cutting tool grinder, coil nail making machine and roofing nail making machine. Look which one is your best choice. If you need help, please feel free to contact us, Metal Tech, a specialized nail making machine manufacturer would be happy to give recommendation advices based on your needs.
Benefits of Buying Nail Making Machine From Metal Tech

Our metal nail making machines enjoy long lifetime. 10-15 years in general, Maximun more than 20 years.

Service, Service, Service. Due to the different markets, regions and countries, some of the clients will face different problems. Metal Tech cherishes every client and offers the best steel nail making machine service always.

Strict steel nail manufacturing machine quality control. Each production step has been controlled by our inspectors. And Metal Tech promise to use high-quality raw materials for all steel wire nail making machine.

Technical support. We can not only provice nail making machine design services, but also design services for client's factory, workshop, etc. for all clients.

Friendship. Besides professional construction nail making machine manufacturing service, Friendship is also the most important thing for Metal Tech, we hope we can make longtime friendship with all customers from all over the world.

Quality. Our automatic wire nail making machine ensures the characteristics of high speed, low noise and less impact.

Wide applications. Automatic nail making machine can be used to produce various specifications of ordinary steel nails, rivets, cement steel nails and other round nails, especially to produce high-quality linoleum nails and other special-shaped nails for high-speed nail welding machines and nail guns.

Innovation. Our automatic wire nail making machines have advanced design, compact structure, beautiful appearance, convenient use and safe operation.


Worker Safety. The equipment of our nail making machine factory adopts fully enclosed work, which is soundproof, dust proof, safe and integrated.

How Does Nail Making Machine Work?
The working model of the nail manufacturing machine is to use the steel wire to make nails of the required sizes. To make steel nails, the raw materials are drawn by the wire drawing machines to remove the rust at the bginning. The diameter of the nail to be made should be prepared at the same time. The straightener in the feeding device will straighten the steel wire at first, and then the steel wire is fed into the nails manufacturing machine. The clamping device completes the clamping process, and cuts and compresses the iron wire according to the specification. Usually raw materials enter the nail production machine to form round nails, and then be put into the nail polishing machines to make the mails look bright.

Iron And Steel Nail Making Machine For Sale

Our company supplies metal nail making machines of different materials, including iron nail machine and steel nail making machine.

Steel nails are widely used in industrial use, agriculture, construction, civil use and so on. Steel nails produced by steel nail making machine are used to nail objects. They are mainly used to fix objects with small axial separation force and small radial shear force. they have the characteristics of simple processing, convenient use, and rapid nailing.

The iron nails produced by the iron nail making machine have a flat head at one end and a sharp end at the other end, which is mainly used for fixing or connecting, and can also be used to hang objects.

From the hardness to distinguish iron and steel nails: the hardness of steel nails is larger, which is used for wood and soil materials. Inquiry steel and iron nail making machine price list Now.

Installation Requirements and Precautions of Stainless Steel Wire Drawing Machine(2022年10月26日)

wiremachinecn — 2022-10-26T15:40:09+0900

https://www.wiremachinecn.com/installation-requirements-and-precautions-of-stainless-steel-wire-drawing-machine.html

The stainless steel wire drawing machine is mainly used for the surface treatment of metal. The ss wire drawing machine adopts physical properties to polish the workpiece while keep the performance of the workpiece does not change at the same timed. For stainless steel wire drawing machine, the following requirements need to be met during the installation and use:

Installation and Use Requirements of Stainless Steel Wire Drawing Machine

The installation foundation of the stainless steel wire drawing machine must be very stable and avoid vibrating.

Before starting the machine, check the air supply and circuit conditions of the stainless steel wire drawing machine to see if there is any air leakage and water accumulation. Install the abrasive belt of the stainless steel wire drawing machine correctly, and the lubrication level of the lifting screw of the upper and lower shafts should be tested. Make sure that there is no one on the discharge, and then the machine can be turned on.


Avoid frequent starting and stopping during the use, which will affect the drawing effect and increase the wear of the drawing die.

In the process of using stainless steel wire drawing machine, operators shall not leave their jobs at will, so as to avoid accidents.

Gloves must be worn when the stainless steel wire drawing machine is operating, because the workpiece will generate high temperature during wire drawing. Wearing gloves can prevent your finger burn and avoid affecting the surface quality of the product.

The stainless steel wire drawing machine should be cleaned and maintained regularly, which can not only reduce the failure, but also prolong the service life of the machine.

Precautions for the Use of SS Wire Drawing Machine

Check whether the lubrication level of each lubricating point is in right places, whether the pressure of the water and gas lines is within the qualified range, and whether there is a falling wire rack on the trolley. Then pull the wire rack and the trolley to the designated positions, put down the pulling claw, and connect it with the pulling claw.

Turn on the power and let the AC main motor run without load for a certain period of time. Place the wire drawing die into the die box of the stainless steel wire drawing machine, and thread the wire that has been nearly tipped in advance into the mold, or pull it into it with a wire drawing pliers and press it tightly. Hang the other end of the wire drawing pliers directly above the reel. Then turn on the speed regulation, and let the drum rotate slowly for 10 to 20 turns with the traction wire. Metal Tech is a steel wire drawing machine manufacturer who has various types of wire drawing machine for sale, including machines for straight line wire, wheel type wire, water tank wire, vertical type wire, and so on. Welcome to contact us for steel wire drawing machine price list.

Remove the wire drawing pliers and withdraw the wire for two to three turns. Manually control the air valve, and let the wire pressing roller press the wire on the reel tightly. Pull the previously withdrawn wire to the drop frame superior. Then start the host at a slower speed, and gradually increase the speed, and the stainless steel wire drawing machine can enter the working state normally. Here we provide a ss wire drawing machine introduction video for you to get better understanding of it.

When the stainless steel wire drawing machine is working under the normal state, there should be no personnel working under the equipment. When the drop frame is full of wires, the ss wire drawing machine will be stopped immediately. Manually control the air valve to release the pressing roller, push out the trolley, lift all the wires on the drop frame, and finally push the trolley in to work again.


Annealing Process of Bell type Annealing Furnace(2022年10月26日)

wiremachinecn — 2022-10-26T15:39:35+0900

https://www.wiremachinecn.com/annealing-process-of-belltype-annealing-furnace.html

Bell annealing furnaces generally use hydrogen or hydrogen-nitrogen mixed gas as the protective gas. Hydrogen often has better thermal conductivity than hydrogen-nitrogen, and high-standard hydrogen has a stronger decarburization ability than hydrogen-nitrogen. Also, the surface of the strip steel treated by the bell type annealing furnace using hydrogen as the protective gas has less carbon slag content and more uniform mechanical properties. Therefore, the use of full hydrogen as a protective gas has been commonly used in some metallurgical industries. So what is the bell annealing furnace process? How does a hydrogen annealing furnace complete the annealing treatment of the workpiece?

Bell Annealing Furnace Process
The main process equipment of the bell type full-hydrogen annealing furnace includes the annealing furnace stand with supply pipeline and discharge pipeline, inner cover, heating cover, cooling cover, valve station and so on. At the beginning of annealing, the steel coils to be annealed should be stacked on the annealing furnace table, the inner cover should be hoisted, and the furnace table, inner cover system and hydrogen inlet valve should be tested for cold sealing. After the test is successful, a nitrogen purge is required, and the heating mantle is hoisted, and then the heating mantle is ignited. When the nitrogen purge meets the conditions, it is necessary to replace the nitrogen in the inner cover with hydrogen purge. When the heating starts, the heating curve should be selected according to different materials for temperature control until the temperature of the steel coil core meets the requirements of the process.

Annealing Treatment of the Workpiece by the Bell Annealing Furnace
In the working process of the bell furnace annealing, the cooling should start from the heating mantle still above the furnace table. Firstly, the air is blown into the heating mantle, and then the heating mantle is removed. Then the cooling cover is hoisted, and the air from the surrounding environment is sucked by the fan on the cooling cover to cool the inner cover. When the circulating atmosphere inside the inner cover reaches the set temperature, the cooling cover fan should stop running. After a while, the spray cooling starts. When the temperature of the steel coil core reaches the set value, the cooling ends, and the cooling cover is removed. Then, a nitrogen purge is performed to replace the hydrogen in the inner cover. Remove the inner cover, and then hoist the steel coil, so that a bell annealing furnace process is completed.

The metal hydraulic bell type furnace is one of the heat treatment equipment in the machinery industry. That is, the wires or metal parts are placed in different heating furnaces, slowly heated to a certain temperature, and maintained for a period of time. Then cool down them at an appropriate rate, usually is natural cooling, sometimes is controlled cooling. According to different energy sources, wire annealing furnace can be divided into electric annealing furnace, the second is gas energy annealing furnace and the third is petroleum energy LPG annealing furnace. Users can choose according to their own situations.

Advantages of Hexagonal Wire Mesh(2022年10月26日)

wiremachinecn — 2022-10-26T15:38:59+0900

https://www.wiremachinecn.com/advantages-of-hexagonal-wire-mesh-machine.html

Hexagonal wire mesh is usually woven from ductile low-carbon iron wire or PVC-coated iron wire. Its structure is firm and the surface is flat. The materials used for it are usually of good anti-corrosion, anti-oxidation and other good characteristics, and that's why hexagonal wire meshes are widely used in aquaculture, construction, greening, decoration and other industries. Hexagonal wire mesh are also often used in water conservancy projects because of their very low cost. It is filled with stones and the opening is sealed, which can be found anywhere.

The installation of the hexagonal wire mesh is very simple, even the novice can install it quickly. No matter how bad the external environment is, it will not rust or deform. When the geology is deformed, the hexagonal network can still maintain its shape and will not collapse. A lot of raw materials can be used for making hexagonal, such as lead wire, iron wire, steel wire and so on. Hexagabion mesh made of steel wire often has more stable structure, and it also has anti-corrosion and anti-oxidation properties. When it is impacted by the outside power, it will not easily deform. Hexagonal wire mesh is a multifunctional mesh product with protection and ecology functions. In order to avoid displacement during the installation, an effective connection should be made between mesh cages, which can not only integrate all cages better, but also increase the stability of the structure.

The hexagonal wire mesh is also an ideal material for anti-corrosion, consolidation of river beds and river management in the geographical field. The hexagonal wire mesh has a natural bioengineering structure, that means once the construction is completed, the hexagonal wire mesh has the function of natural restoration of the environment. This is of great importance. The hexagonal wire mesh not only does not prevent the growth of plants, but also create a good ecological environment for the natural growth of plants, the development of root systems, etc., and provide a good aesthetic habitat for humans, animals and plants. Furthermore, after the installation, the hexagonal wire mesh can reduce surrounding noise and provide a more attractive drainage and filtering device.

Hexagonal Wire Mesh Machine

Hexagonal wire mesh machine is a device for producing regular hexagonal metal meshes. Its wire mesh products are widely used in such industries as petroleum, construction, aquaculture, chemical industry, heating pipelines and other pipelines. Hexagonal wire mesh can also be used for fences, residential and landscaping protection. In addition, the hexagonal wire mesh can also be used to make gabion cages, which are widely used to protect and support seawalls, hillsides, roads and bridges, reservoirs and other civil engineering. Undoubtedly, hexagonal wire mesh is a good material for flood control.

MTC wire mesh manufacturing machine is a machine that produces heavy hexagonal wire mesh, and then folded over and connected to form a mesh to complete the hexagabion box. The basic working principle is the interweaving of horizontal barbed wire and vertical barbed wire. The entire packaging of galvanized hexagonal wire mesh machine includes a pay-off frame, a wire pay-off machine, a wire drawing machine, a main net machine and a winding machine. And the workshop size usually requires 32x15x6 meters (LXWXH). Heavy duty hexagonal wire mesh machine are widely used in water conservancy projects, mountain protection and mining protection all over the world. Hexagabion mesh boxes are also more economical than concrete products. Welcome to enquiry our wire net making machine prices!

There are many wire drawing machine manufacturers, but we are one of the best choices for you.

Screw Making Machine(2022年09月25日)

wiremachinecn — 2022-09-19T11:01:39+0900

https://www.wiremachinecn.com/products/screw-making-machine/

Metal Tech is committed to producing fully functional cold heading machines. The cold heading machine is mainly used for the head forming of screw products, and its working principle is wire calibration. Metal Tech adopts more advanced production technology, and the production capacity can reach about 200 pieces per minute, which in turn allows manufacturers to save human resources and increase profits.

Metal Tech adopts more advanced production technology and is committed to producing fully functional thread rolling machines. The process principle of the thread rolling machine is to plastically deform the product through the compression of a dynamic and static screw to form the required thread.

The production of bolt making machine mainly adopts multi-station cold heading forming technology. Metal Tech adopts advanced production technology at home and abroad, and is committed to producing fully functional bolt manufacturing machines. The cold heading machine is mainly used in the production of bolts and some non-standard accessories.

Metal Tech adopts advanced technology at home and abroad and is committed to producing fully functional nut making machines. The nut making machine is mainly used in the production of nuts and some non-standard accessories. Metal Tech hopes to continuously improve production efficiency so that manufacturers who purchase our equipment can save human resources and increase profits.

Metal Tech is committed to adopting advanced production technology to produce fully functional nut tapping machines. The nut tapping machine is indispensable in the nut production process, and is mainly used for the production of nut internal threads.

Screw Making Machine Topic
Screw making machine is mainly used to produce standard parts, such as screws, bolts, nuts, etc. the machine can be subdivided into a screw machine, bolt machine, nut machine, thread rolling machine, nut tapping machine, etc. The standard parts, fasteners, and some non-standard parts produced by them are widely used in various fields of the national economy, such as construction, machinery, aviation, ship, rail transit, automobile Motorcycle, bicycle, sewing, furniture, and light industry, daily necessities and other industries.

Want to know the details of wet wire drawing machine and tar jali machine price, contact us.

Gabion Mesh Weaving Machine(2022年09月24日)

wiremachinecn — 2022-09-19T11:01:08+0900

https://www.wiremachinecn.com/products/gabion-mesh-machine/

Gabion Mesh Weaving Machine
Gabion wire mesh machine is a kind of wire mesh machine to produce hexagonal wire mesh, then to fold and connect each other net to complete gabion box mesh machine.

The basic working principle of automatic gabion mesh hydraulic press machine is horizontal wire netting and interlacing with vertical wire. Gabion machine and gabion mesh machine is widely used for water engineering, hill mountain protection and mining protection, etc in all over the world, the gabion box is more economic than concrete products. Gabion machine includes wire pay-off frame, wire pay-off, wire tension machine, main netting machine and net winding machine, the workshop size usually requests 32x15x6 meters (LXWXH).

Metal Tech gabion mesh machine use heavy duty raw materials like gear box, beam, and high-quality raw material like casting steel, quenching iron, etc. All parts are fine treatment. And we always offer reasonable gabion mesh machine cost for all of our clients. Choose good price and quality gabion mesh machine.

Automatic gabion wire mesh machine price direct from China gabion mesh machine manufacturers, inquiry now！

Specifications of Gabion Wire Mesh Machine
Mesh Size
(mm)Max. Netting
(mm)Max.Dia of Weaving wire
(mm)Max.Dia of Bordering wire
(mm)Max Weaving-
vein No.Power
(kw)Real Production CapacityExterior Size
(m)Weight
(T)
L×W×H
60×8045002.74.03/530400-400 Sq.m /Hour6.8×1.4×2.413
55002.74.03/530500-550 Sq.m /Hour7.8×1.4×2.414
80×10045003.04.03/530480-520 Sq.m /Hour6.8×1.4×2.413
55003.04.03/530480-520 Sq.m /Hour7.8×1.4×2.414
100×12045003.54.03/530560-600 Sq.m /Hour6.8×1.4×2.413
55003.54.03/530560-600 Sq.m /Hour7.8×1.4×2.414

Advantages of Gabion Wire Mesh Machine
Gabion wire mesh machines use high-quality material parts, such as NSK bearing, PARKER hydraulic system, quenching and brazing half gear etc, strict quality management all these guarantee superior quality and long performance gabion machine life. Inquriy gabion mesh machine price now.

Advantages of Metal Tech Gabion Mesh Machine Manufacturers
Metal Tech is one of the professional gabion mesh machine suppliers in China for many years. Our gabion wire mesh machine are of high quality and meet different demands from overseas and board. We can quickly organize the gabion production line of screen weaving machines with special specifications for customers, no matter how large or small the quantity is. Metal Tech Gabion wire mesh machines make us one of the famous gabion wire mesh machine bulk factory in China. Inquiry now and get wholesale gabion mesh machine price now.

Gabion Wall Wire Mesh Machine Application
Gabion wall mesh machine for Bank protection: gabion structure is a very successful example of river bank protection and slope protection, which gives full play to the advantages of gabions and achieves ideal results that cannot be achieved by other methods.

Gabion wall mesh machine for protection of scenic spots: gabions applied in urban areas or scenic spots can help protect buildings from erosion. In urban rivers, some people use gabions to build embankments, which are both space-saving and neat and beautiful, and the mesh boxes with exposed stones are close to nature.

Gabion wall mesh machine for flood control: Gabions can be folded and transported, and after transported to the site they can be directly formed into cages and then used to block river water, making them a good protective structure.

There are many wire drawing machine manufacturers, but we are one of the best choices for you.

Gabion Machine Manufacturer(2022年09月23日)

wiremachinecn — 2022-09-19T11:00:36+0900

https://www.wiremachinecn.com/products/gabion-machine/
Gabion Machine Manufacturer
Gabion machine, also known as gabion mesh machine, its purpose is to produce wire mesh, and then the complete net is folded and connected into a complete stone cage net box. The basic working principle is the interweaving of horizontal and vertical screens. As a gabion machine manufacturer, Metal Tech is committed to providing different types of gabion machines with reasonable gabion machine price.

Types of Gabion Making Machine
There are many types of gabion machine produced by our gabion machine manufacturer for you to choose. Different types have different gabion machine price to meet your different needs. If you want to learn more, please contact us!

Advantages of Gabion Making Machine

Ease of handling and transportation.

Speed of construction.

Flexibility (Gabions tolerate movement)

Permeability to water (Good drainage)

Gabions offer an easy-to-use method for decreasing water velocity and protecting slopes from erosion.

Firstly, gabion mesh machine is to produce high quality wire mesh like hexagonal netting products for strengthening stone box use. Secondly, our gabion mesh machine utilizes advanced technology at home and abroad to guarantee the smooth operation and low noise. Lastly but not least, it is convenient to control for customers due to its design.

Gabion Making Machines Topics
What is Gabion Making Machine
Gabion net machine is a machine specially used for producing gabion net in gabion machine line. The so-called gabion is a cage filled with stones set up to prevent river banks or structures from being washed by water. In China, the ecological grid structure originated from bamboo cages that lasted more than 2,000 years, and Li Bing and his sons first used it in the Dujiangyan Project.

The Application of Gabion Making Machine
Nowadays, as a new type of ecological grid structure with new technology, new technology and new materials, the mesh straightening machine has been successfully applied to the protection projects of water conservancy projects, highways, railway projects, and dikes, and it has realized the organic combination of engineering structure and ecological environment.

Gabion Making Machine Is Used To Produce Following Hexagonal Netting Products
One of the gabion mesh machine produced by our gabion machine manufacturer can be specifically applied to produce the following hexagonal netting products, which is a hexagonal wire mesh machine. We provide customers with heavy hexagonal wire mesh machines and ancillary equipment, materials and tools, helping them install and set up gabion machine lines to produce hexagonal netting products. This hexagonal netting product are often fixed in a proper position through rock and other fillers, which can prevent the damage caused by water scouring.
Gabion Box Machine, Gabion Machine Manufacturers Video

As one of gabion machine manufacturers, Metal Tech boasts a elite company team using the most advanced technology at home and abroad to provide customers with the best quality service and decent gabion machine price.

Electric Annealing Furnace(2022年09月22日)

wiremachinecn — 2022-09-19T10:59:49+0900

https://www.wiremachinecn.com/products/electric-annealing-furnace/

Electric Annealing Furnace
Metal tech Annealing furnace is one of the heat treatment equipment in mechanical industry. Which put the wire or metal parts in different heating furnaces, slowly heat them to a certain temperature, keep them for a period of time, and then cool them at an appropriate speed (usually natural cooling, sometimes controlled cooling).According to different energy sources, it can be classified into electric energy, gas energy and oil energy. Users can choose according to their own situation. This is the annealing furnace of electric energy.

Specifications of Electric Annealing Furnace
Furnace specificationPower supply: Electricity
Capacity: 2.0T/8hours
Power: 70kw
Furnace Body5mm Q235 board furnace shell
Lightweight firebrick Internal liner
Holocellulose alumina silicate keeping temperature
Heating element: Cr20Ni80
Furnace TubeThickness: 8mm,
Dia.: 800mm,
high: 1200mm
Material: Stainless Steel
Working Process of Annealing Wirea. Two hours heating to 650°C-700°C
b. Keeping Temperature 650°C-700°Cfor 2 hours
c. Keep the tube in the furnace, cooling for 4 hours till the temperature is about 300°C
d. Taking out of the tube put another one in
e. When the tube temperature is below 170°C, take the wire out

Advantages of Electric Annealing Furnace

Metal tech Annealing furnace use high-quality material parts, strict quality management all these guarantee superior quality and long performance Annealing furnace life.

Want to know annealing furnace pdf and the details of gabion box machine, please feel free to contact us!

Fully Automatic Chain Link Fence Machine(2022年09月21日)

wiremachinecn — 2022-09-19T10:59:03+0900

https://www.wiremachinecn.com/products/chain-link-fence-machine/

Chain link fencing jali machine can be called Diamond wire mesh as well. there are four types of fully automatic chain link fencing machines: 1. Double wire chain link fence machine, single wire chain link fence machine, double wire double mold chain link fence machine, and manual chain link fence machine. According to different country different wire raw material we recommend the most suitable model to our clients. As one of the chain link fence machine manufacturers, Metal Tech is committed to providing different types of chain link-making machines with reasonable fencing jali machine price.

Chain Link Fence Machine Suppliers
As chain link fence machine manufacturers, Metal Tech has always been committed to improving the technical level of chain link jali machine, absorbing the advanced technology from peer manufacturers, and continuously developing new products and technological innovations, striving to provide high-quality, low fencing making machine price, and complete varieties.

Advantage of Chain Link Fencing Making Machine

Long lifetime,10 -15years in general, Max. 15-20years.


Service, due to the different markets, different countries, some of the clients will face some problem of gabion mesh machine. Metal Tech cherishes every client and does the best service always.


Machine quality control, each production step has been controlled by inspectors. And use all high-quality raw materials.


Technical support, we can design not only machines but also the client's factory, workshop, etc for all clients.


Friendship, besides professional business and manufacturing service, the most thing for Metal Tech, we hope we can make longtime friendships for all people from all over the world.


The fully automatic chain link fencing machine uses high-quality materials, low-carbon steel wire welded into a mesh, which is not easy to break and rust.


The machine of our chain link fence machine supplier adopts high-quality plastic sprayed plastic, and the color is not easy to fall off.


It is corrosion resistance, high temperature resistance, beautiful appearance, wide use and easy to install.


The color and size of customized products can be selected according to your actual situation.


Our fully automatic chain link fence machine produces the modeling novel structure with wide field of vision, beautiful, smooth and flat fence net used in many places.

Why Choose Chain Link Fence Machine Manufacturers
Fully automatic chain link fencing machine can produce diamond form wire mesh with underwire (forming by mold) interweave one by one or together. The diamond mesh net can be widely using in human life.

For many years, with the cooperation of the scientific research and design department, our chain link fence machine supplier has always been committed to improving the technical level of our machinery and equipment, absorbing the advanced technology from peer manufacturers, and constantly carrying out new product development and technological innovation, and striving to provide high quality and low cost of automatic chain link fencing machine, complete variety and excellent service are well-known in this industry. Our chain link fence machine not only covers all parts of the country, but also exports to Southeast Asia, the Middle East, Africa, Latin America and other countries. Compared with other companies, our company's products are the most cost-effective. At the same time, customer satisfaction has always been among the best in the industry, if you are interested, please contact us for competitive fencing wire machine price.

Types of Annealing Furnaces(2022年09月20日)

wiremachinecn — 2022-09-19T10:58:23+0900

https://www.wiremachinecn.com/products/annealing-furnace/

Types of Annealing Furnaces
Metal Tech offers four types of wire annealing furnace for sale from the perspective of energy, including gas annealing furnace, LPG annealing furnace, electric annealing furnace and hydraulic cover annealing furnace. Besides, you can choose other furnaces including bell type annealing furnace, bright annealing furnace, vacuum annealing furnace and aluminum annealing furnace based on your requirements.Advantage of Annealing FurnaceLong lifetime. 8-12 years in general, Max. more than 15 years.Service, Service, Service. Due to the different markets, different countries, some of the clients will face some problems with Wire Drawing Machine. Metal Tech cherishes every client and does the best service always.Machine quality control. Each production step has been controlled by our inspectors. And use all high-quality raw materials.Technical support. We can design not only machines but also client's factory, workshop, etc. for all clients.Friendship, besides professional business and manufacturing service, Friendship is also the most important thing for Metal Tech, we hope we can make longtime friendship with all people from all over the world.Annealing Furnace TopicAnnealing furnace's purpose is to soften the Metal material or workpiece processed by drawing, casting, forging, welding or cutting, reduce hardness, improve plasticity and toughness, homogenize chemical composition, remove residual stress, or obtain expected physical properties.Annealing Furnace Process and Working PrincipleThere are three stages of wire annealing furnace process. The first stage is heating to the required temperature. The second is holding at a constant temperature. The last stage is cooling. Most importantly, The high temperature cycle should be long enough to guarantee the desired transformation. The process of cooling should be done slowly to avoid cracking due to the thermal gradients and thermos-elastic stresses in the metal parts. Our annealing furnace manufacturer is always committed to supply high-quality wire annealing furnaces.Annealing Furnace DesignOur annealing furnace manufacturer adheres to the annealing furnace design of simple operation, convenient and safe products, and is committed to providing customers with high-quality annealing furnaces and installation and other after-sales services. There are various types of wire annealing furnace. Our products save customers a lot of time and labor costs, not only improve the customer's operating efficiency, but also achieve mutual benefit and mutual progress. Our company aims to become the world's top annealing furnace manufacturer. If you want to know more about our products, please contact us.

Metal Tech Wire and Wire Mesh Machine(2022年09月19日)

wiremachinecn — 2022-09-19T10:57:44+0900

https://www.wiremachinecn.com/products/

Metal Tech is committed to the design, manufacturing, and distribution of Wire and Wire Mesh machines, including Wire Drawing Machine, Nail Making Machine, Screw Making Machine, Gabion Machine, Chain Link Fence Machine, Welding Mesh Making Machine, Barbed Wire Making Machine, Annealing furnace, Wire Galvanizing Production Line, etc.Steel wires, nails, and fasteners produced by our machines are widely used in the field of construction, and various Meshes are widely used in the field of Architectural & Decoration, Poultry, and Water Engineering.Over the past 15 years, we have exported hundreds of machines to dozens of countries. Due to our machines' advanced technology, high degree of automation, easy and safe operation, high speed, low noise, beautiful appearance, long service life, and other characteristics, our machines are favored by all our customers.Customers who use our machines not only win more market share and profits but also make great congratulations for the local economic development and infrastructure construction.Types of Metal Tech Wire Machine

main three types of barbed wire machines we call the CS-A Barbed wire making machine, CS-B Single Barbed wire making machine and CS-C barbed wire making machine.

Read MoreFeatures of Wire MachineMetal Tech wire and wire mesh machinery main feature can be included as 4 points:Intelligentialize - Machine equipped with PLC, frequency inverter, HMI. Complete program support machine running smooth.Convenient Operating- Machine designed based on the different countries' conditions suit for local operator habit.Safety- Metal Tech design machines will consider full operation safety conditions, try 100% to protect the operator from risk.Nice Exterior-Professional designer makes the standard of machine exterior such as printing color, machine exterior, electric cabinet design, and so on.Advantages of Wire MachineAll of our Wire and Wire Mesh machines, including Wire Drawing Machine, Nail Making Machine, Screw Making Machine, Gabion Machine, Chain Link Fence Machine, Welding Mesh Making Machine, Barbed Wire Making Machine, Annealing furnace, Wire Galvanizing Production Line, etc. are independently developed by our technical team, using the most advanced technology in the world, and all of them are controlled by PLC system, with a very high degree of automation.They are easy to operate, high speed, low noise, beautiful appearance, a service life of more than 10 years.And in the safety design, the maximum degree of protection of the lives and health and safety of operators.