年表作成・共有サービス - pastport

https://www.fv-bearing.com/slewing-ring-bearings.html
Slewing bearings are very important construction machinery parts. Slewing bearings are a simple yet complex category. Structurally, there are mainly slewing ring bearing with internal teeth, external teeth, and no teeth. In terms of internal structure, it is divided into single-row, double-row, and three-row ball and roller slewing bearings. Because the slewing bearing is widely used, once there is a problem, it must be repaired in time. Today Luoyang FV provides three simple repair methods, I hope these methods are useful to you.

1. Record the appearance of the slewing bearing.
When the slewing bearing fails in the use of mechanical equipment, when dismantling the slewing bearing for maintenance, the appearance of the slewing bearing should be recorded, and the remaining amount of lubricating oil in the slewing bearing should be checked. After the lubricating oil is sampled and stored, kerosene or gasoline should be selected. Simple cleaning of the slewing bearing. The appearance of the bearing and the analysis of the lubricating oil are useful for later judging the cause of the failure of the slewing bearing.

2. Rough wash first and then fine wash.
After rough cleaning, clean the removed slewing bearing, place the slewing bearing on the container, and place the metal mesh as the bottom to prevent the slewing bearing from directly contacting the dirt at the bottom of the container. If the rolling surface of the slewing bearing is damaged, after cleaning the grease with a brush, enter the fine cleaning step, put the slewing bearing into the cleaning oil, and clean it while rotating. If the cleaning oil is dirty, it should be replaced in time to ensure a good cleaning effect.

3. Check the slewing bearing with professional methods.
In order to ensure that the removed slewing bearing can continue to be used, it must be checked after the slewing bearing is cleaned. The inspection items of the slewing bearing include: foreign matter, clearance, dimensional accuracy, wear of the slewing bearing frame, state of mating surface, state of rolling surface, raceway surface state, rolling element running state, etc.

Luoyang FV can not only produce standard slewing ring bearings, but also can design according to customer's requirements and operating conditions, and we can also repair slewing bearings. After the maintenance of the slewing bearing, the customer can obtain the maximum use effect at the minimum cost. Welcome your inquiry!

If you want to know more, please contact us:
Tel: 0086-379-62901536
Mob: 0086-18638891360
Mail: sales@fv-bearing.com
Web:https://www.fv-bearing.com