2015 Hot Sale HDPE PE 100 Granules/ PE 80

(2022年06月22日)

Material: LDPE Sample: Free Packing: in Bag Trademark: ECO Specification: 25kg/Bag HS Code: 3901902000 Delivery Time: 10-15 Days Feature: High Quality and Competitive Price Usage: Plastic Material Transport Package: Package Details Origin: China Product DescriptionLDPE1. Blow molding grade,2. Injection molding grade,3. Film grade;4. Extrusion grade.Application of LDPE Low Density Polyethylene:LDPE(low density polyethylene) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc...LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc...They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams.2. SpecificationsFlame resistance material for HDPE pipesThis is the raw material for producing pipeGrade: PE100/PE 80Anti-flame,High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.3. Application:Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating4. Storage:Shelf life: It should avoid damp, contaminated and direct sun light during transport. And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together, and away from the fire.  Physical Properties Test Method  Nominal Value Unit  Density  ISO1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1183  1.9 g/10min Hardness       Shore Hardness(shore D) ISO868 45   Mechanical Properties       Tensile Modulus  ISO572-2 175 Mpa Tensile Strength  Yield  ISO527-2 9.0 MPa  Break 13.0 Tensile Strain(Break) ISO527-2 850 % Modulus of Elasticity Internal Method  250 Mpa Thermal        Vicat Softening Temperature(DSC) ISO306/A50 89.0 Centidegree Melting Temperature(DSC) DIN 53765 108 Centidegree Peak Crystallization Temperature(DSC) DIN 53765 97.0 Centidegree Heat of Fusion DIN 53765 110 J/g Electrical        Volume Resistivity ASTM D257 8.5E+15 Ohm.cm Dielectric Strength ASTM D149 30.0 KV/mm Dielectric Constant(60HZ) ASTM D150 2.2 % Dissipation Factor(60HZ) ASTM D150 0.00050     HDPE cable material Property Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg)g/10min ≤1.0 Tensile yield strength MPa ≥19.0 Flexural modulus Mpa ≥965 Elongation@ break % ≥400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15  HDPE kinds:Film Grade  Item Test condition Test Method Value Unit Density   ISO 1183 0.944-0.955 g/cm3 MFR 190°C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield   ISO 527-2 22 MPa Elongation at break   ISO 527-2  >350 % ESCR F50,50°C,100% ASTM D-1693A 1000 h VICAT    ASTM D-1525 126 °C  Blown Grade  Item Test Condition Test Method Value Unit Density   ISO 1183 0.950~0.955  g/cm MFR 190°C/2.16kg ISO 1133 1.7~2.5  g/10min Tensile strength at yield   ISO 527-2 24 MPa Elongation at break   ISO 527-2 >600 %  Injection grade Item Test Condition Test Method Value Unit MFR 190°C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR   ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 °C TRADE TERMSPayment: 30% T/T deposit payment in advance, balance against copy of b/l, western union accepted.Production lead time: 15 - 20 days after deposit payment.Shipping methods: Ocean freight.FOB shipping port: Shenzhen, China.If you want to deal with CIF/CNF term instead of FOB, please specify. Otherwise, FOB price will be quoted under inquiry.  Quality assurance1.On a regular basis or as per your request,we entrust national testing agencies to conduct quality inspections2.Strictly in accordance with the ISO9001-2008 international quality system standard,we monitor and manage the whole process throughout production,quality testing,and measurement to ensure product quality3.  For quality-related construction delay or substandard construction(except for damage or losses due to customer's responsibility or irresistible natural disasters),we have refunding,replacement,and repair services.We will respond to customers' feedbacks on quality issues within 24 hours.Best regardsMonicasky:monicali1025Shandong Yadai New Materials Co., Ltd.Address: No. 29 Xing'an Road, Shibei District, Shandong Province, Qingdao, Shandong, ChinaTEL: 86 - 532 - 80935762FAX: 86 - 532 - 80935762Phone: 86-13306484531www.ydplastic.comMADE-IN-CHINA:http://yadaixincailiao.en.made-in-china.com  http://www.chgeomembrane.com/plastic-resin/

コメント