年表作成・共有サービス - pastport

https://www.cntuolima.com/products/gyta-gyts-fiber-optic-cable/

The structure of GYTA optical cable is that single-mode or multi-mode optical fiber is sheathed in a loose tube made of high modulus polyester material, and the tube is filled with waterproof compound. The center of the cable core is a metal reinforced core. For certain GYTA fiber cable or gyts fiber optic cable, a layer of polyethylene (PE) needs to be squeezed outside the metal reinforced core. The loose tube (and filling rope) is twisted around the central reinforcing core to form a compact circular cable core, and the gaps in the cable core are filled with water blocking fillers. Plastic-coated aluminum tape (APL) is longitudinally wrapped and then extruded into a cable with a polyethylene sheath.

As one of the professional fiber optic accessories suppliers, TUOLIMA can customize the optical cable according to your requirements. If you need any technical support, we will also recommend the most suitable and cost-effective customized ADSS fiber optical cable for you according to the use environment, laying method and terminal customer requirements of the optical cable. You can check the details of our GYTA fiber cable below. If you have any questions, feel free to consult.

Details of GYTA Fiber Optical Cable
GYTAMaximum number of tubesStructureLoose tubes  diameter
mmCSM/undercourse
mmNominal thickness
mmCable diameter
mmCable unit weight
kg/km
2~30core61+5Æ1.6Æ1.45/Æ1.451.8±0.19.3±0.3102
32~36 core61+6Æ1.6Æ1.7/Æ1.71.8±0.19.6±0.3110
38~60 core121+5Æ1.9Æ1.5/Æ1.51.8±0.110.0±0.3113
62~72 core121+6Æ1.9Æ2.0/Æ2.01.8±0.110.5±0.3132
74~84 core121+7Æ1.9Æ1.45/Æ2.61.8±0.111.1±0.3159
86~96 core121+8Æ1.9Æ2.0/Æ3.21.8±0.111.7±0.3159
98~108 core121+9Æ1.9Æ2.0/Æ3.91.8±0.112.3±0.3173
110~120 core121+10Æ1.9Æ2.0/Æ4.51.8±0.113.0±0.3187
122~132 core121+11Æ1.9Æ2.0/Æ5.11.8±0.113.6±0.3200
134~144 core121+12Æ1.9Æ2.0/Æ5.81.8±0.114.3±0.3219

Packing and Comments of gyta cable
Packing material: Non-returnable wooden drum.

Both ends of cable are securely fastened to drum and sealed with a shrinkable cap to prevent ingress of moisture.

Cable printing: The sequential number of the outdoor optical cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

Cable type and number of optical fiber

Manufacturer name

Month and Year of Manufacture

Cable length

Drum marking: Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with following:

Manufacture name and logo

Cable length

Cable type and number of fibers

Roll way

Gross and net weight