年表作成・共有サービス - pastport

https://www.etcnbusiness.com/machining-service/casting/
Casting is one of the basic processes of modern equipment manufacturing. The casting process can be divided into three basic steps, namely casting metal preparation, mold preparation, and casting processing. Casting metal refers to the metal material used for casting castings in the production of castings. It is an alloy in which metal elements are the main components and other metals or non-metal elements are added. It is usually called casting alloy, which mainly includes cast iron, cast steel, and cast non-ferrous alloy.

As one of the professional precious metal casting companies or precious iron casting companies, ECTN provides our clients with advanced metal casting services such as low pressure aluminum casting and high pressure aluminum casting, custom aluminum casting, custom brass casting, permanent mold aluminum casting and etc.

As a common catrgory of advanced metal casting, gravity mold casting is an ideal choice for the production of various complex aluminum castings of automotive parts.
Die Casting
The product uses die-casting process to complete the blank, CNC machining and polishing treatment, suitable for auto parts.
Gravity Casting
The product is a casting product, which is used to fix the support of the driven shaft. The surface is not machined and has no holes and cracks.
Processable Materials for Casting
Copper
Magnesium
Stainless Steel
Carbon Steel
Alloy Steel
Zinc Alloy
Aluminium Alloy
ABS
Aceta
Acrylic
Carbon Fibe
Fiberglass
Nylon
Polycarbonate
Spring Steel
PTEF
PVC
Neoprene
Polyethylene
Polypropylene
Polystyrene
Rubbe
Silicone
NBR
Advantage of Casting
It Can Produce Parts With Complex Shapes, Especially Blanks With Complex Cavitie
Wide Adaptability, Metal Materials Commonly Used In Industry Can Be Cast, From A Few Grams To Hundreds Of Tons.
The Shape And Size Of The Casting Are Very Close To That Of The Parts, Reducing The Amount Of Cutting, Which Is Non-cutting.
It is Widely Used
40%~70% of agricultural machinery and 70%~80% of machine tools are castings.
Casting FAQs
Casting Cracks
1. Usually, the metal solidifies too fast at this place, resulting in casting defects (joints);
2. Cracks caused by high temperatures.
The solution: Use low-strength investment materials, reduce the casting temperature of the metal as much as possible, and do not use alloys with low ductility and brittleness.
Easy To Crack When Die-casting Thin-walled Products
If this problem occurs, it may be due to material problems or poor mold opening or improper selection of process parameters. Try to control the proportion of waste not to exceed 30%. The mold retention time should not be too long, about 3s per mm of wall thickness, and ejection delay is not allowed. Long, generally 0.5-2s.
Metal Splashing During Die Casting
Reinstall the mold; increase the clamping force and adjust the die-casting machine to keep the movable and fixed mold mounting plates parallel to each other; add a support plate on the movable mold to increase the rigidity of the sleeve plate.
Why Can't The Inner Processing Of Aluminum Die-casting Hole Exceed 0.25mm
In order to be suitable for die casting, people add a lot of silicon to the aluminum alloy used for die casting. When the aluminum alloy condenses in the mold, the silicon will float on the surface to form a layer of silicon film that is very hard and wear-resistant. Some OEM designers use this feature to directly design the inner surface of the die casting hole as a bearing surface. This silicon surface layer is generally only 0.2 to 0.9 mm thick. With too much processing, the life of the bearing surface will be shortened.
Unclear Marking During Casting
1. The mark on the mold is not clear enough (the reason for the mold);
2. The markings on the mold are not clear. You can analyze whether the particle size of the following molding sand is fine enough and whether the strength is high enough;
3. The refractoriness of the mold and coating is not enough.
4. Another factor that is easily overlooked is the casting location of the casting mark. When determining the casting position, try to keep the casting mark on the bottom or side to avoid being on the top surface.
ETCN is a professional cnc company, we provide china cnc manufacturing,vacuum pressure casting, sand casting and die casting, fabrication and machining and etc. Want to know aluminium casting price? contact us.