年表作成・共有サービス - pastport

https://www.growingmechanical.com/products/automatic-foil-stampingdie-cutting-machine/

Automatic Foil Stamping & Die Cutting Machine
We designed 1050FH automatic foil stamping machine, which is the greatest research and development and manufacturing of new equipment with a higher degree of intelligence.

This automatic hot foil stamping and printing machine adopts many international advanced pneumatic and servo-driven processing technologies. After strict quality control of assembly, our automatic foiling machine has the advantages of simple operation, safety and reliability.

This automatic foil printing machine can perform stamping, creasing and die-cutting operations after printing on paper, cardboard, corrugated paper less than 4mm, paste paper and laminated paper of 80g/m² or more.

When the speed of automatic foil stamping & die cutting machine reaches 7,500 sheets/hour, the good quality and design make the machine work stably as well as ensure safety. As one of the mature automatic die cutting machine manufacturers, we produce machines that will provide you with a comfortable operation and faster return on investment.

Features of Automatic Foil Stamping&die Cutting Machine

Feeder/Feeding Section
Imported high quality feeder, high precision，stable in high speed.

Four suction nozzles, four sending nozzles, ensure feeding smoothly.

Adopt imported screw air-blowing device, it could make the sheet send smoothly.

Suction angle and height can be adjustable.

Non-stop paper feeding device

Double sheet detecting system

Suction-blow two function vacuum pump

The design of stacker preparatory

stage was improved, it could use

prepared car sheet piling. Also could

use ordinary hydraulic car sheet piling

to stacker directly.

Feeding Positioning Section
The incline-type paper moving table top is more suitable to high-speed thin paper and location. Side location adopt dual purpose side device with pull guide and push guide, accounting to paper choose, it makes switch easier. It could switch front rise position arriving reduction of speed device, it is benefit of thin paper’s location.

Cutting Section/Horizontal and vertical foil stamping system
Adopt advanced technology with single gripper location could adjust the front-and-back registration. Horizontal hot stamping dual-anxis/Vertical hot stamping collection of waste foil frame into operation side, it is benefit of operation. 12 electric heating areas have timing penumatic temperature controller function, each area can be controlled separately. It makes foil-delivering servo curve tracking the speed variation of machine in time for using motion controller. So it could reach the foil-delivering smoothly.

Foil Stamping/ Die Cutting Section
The driving gear ensures high speed of die cutting together. The pneumatic locking mechanism and air clutch are fast and stable. The die cutting frame can prevent the die cutting plate from drooping or separating effectively.

Quick Changed Foil Device
Vertical under foil frame could be pulled out of machine, so that it could make the foil work more convenient.

Rewinding Device
There has brush rewinding foil function. And it has equipped with a re-coil collection waste foil device. The buffer force prevent the foil from broken.

Delivery Section
Delivery section add tester into security system. It is equipped with inset counter. Using subsection could adjust brush and sheet air-blowing device, so the finished product of delivery section could product stably. Gripper drive train expanded buffer device. A non-stop paper delivery device bring high efficiency and fast return.

Specification of Automatic Foil Stamping&die Cutting Machine
Max. Paper Size 1050×750 mm

Min. Paper Size 400×360 mm

Max. Cutting Size 1040×720 mm

Max. Foil Stamping Size 1020×600 mm

Inner Chase Size 1080×745 mm

Steel Plate Size 1080×736 mm

Processed Materials Cardboard：80~2000 g/m² Corrugated Paper：≤4mm

Max. Pressure 300 N/cm²

Gripper Margin 8 mm

Max. Working Speed 7500 s/h

Total Weight 16.8 T

Dimension (L×W×H) 7060×4200×2230 mm

Max. Feeding Pile Height 1550 mm

Max. Delivery Pile Height 1400 mm

Foil Shaft V3+H2

Vertical foil stamping section performance specification

Max. Foil Width 1020 mm

Min. Foil Width 25 mm

Max. Length of Pull Foil 700 mm

Max. Diameter of Foil Φ 240mm

Horizontal foil stamping section performance specification

Max. Foil Width 600 mm

Min. Foil Width 25 mm

Max. Length of Pull Foil 1020 mm

Max. Diameter of Foil Φ200 mm

Foil stamping system&other comprehensive performance specification

Stamping temp. adjustable range 0℃~200℃

Heating zones 12

Heated Plate Power 24 kw / 24kw

Total Power 57 kw

Voltage Requirements 380V 50Hz

Air compressor 0.8Mpa, 0.36m² /min

No.
Accessory
Brand
Place of Origin

1
Photoelectric Switch
SUNX
Japan

2
HMI
WEINVIEW
Taiwan

3
Button
SCHNEIDER
France

4
A.C. Contactor
SIEMENS
Germany

5
Solid State Relay
FOTEK
Taiwan

6
PLC
MITSUBISHI/PANASONIC
Japan

7
Electric Horn
QLIGHT
Korea

8
Magnetic Valve
SMC
Japan

9
Oil-water Separator
AIRTAC
Taiwan

10
Motor Breaker
SIEMENS
Germany

11
Servo Motor
YASKAWA
Japan

12
Main Motor
TECO
Taiwan

13
Gear Motor
CPG
Taiwan

14
Oil Pressure Switch
ARK
Korea

15
Pneumatic Clutch
OMPI
Italy

16
Paper Feed Clutch
MIKIPULLEY/OGURA
Japan

17
Torque Limiter
JASU
Taiwan

18
Indexing Drives
TAN TZU
Taiwan

19
Vacuum Pump
BECKER
Germany

20
Feeder
YONGCHUAN
Taiwan

21
Feeder Nozzle
SILENT
Sweden

22
Tooth Row Drive Chain
RENOLD
Britain

23
Other Drive Chain
TYC
Taiwan

24
Tooth Row
JASU
Taiwan

25
Bearing
FALA/IKO
Germany/Japan

26
Rotary Joints
DEUBLIN
America

27
Timing Belt
OPTIBELT
Germany

28
Paper Feed Belt
CODONBELT
Switzerland

29
Mould Coil Spring
TOHATSU
Japan

30
Worm&Worm Wheel
LIMING
Taiwan

31
Oil Temp.Conditioning System
WLP
Taiwan

32
Cooling Fan
SUNON
Taiwan

33
Heat Exchanger
LEINIX
America

34
Lubrication Pump
YONGSHENG
Taiwan

35
Encoder
OMRON
Japan

36
Sealing Ring
CTY
Germany

37
Frequency Converter
YASKAWA
Japan

38
Body Material
Ductile Iron QT600-3

Highlights of Automatic Foil Stamping&die Cutting Machine

01
Pneumatic Clutch
The high quality pneumatic clutch reduces noise and minimizes impact when stopping the machine at a high speed.

02
Lubrication System
With a programmable lubrication system, the accurate control of PLC ensures balanced lubrication of the machine.

03
Vacuum Pump
Adopt imported equipment, improve the stability of the machine, low noise, high performance, long service life.

04
Gripper and Chain
The grippers are made of special extra hard aluminum alloy, with anode treatment on the surface, ensuring accurate die cutting and embossing, etc. at high speed. The adjustment mechanism, patent design guarantees very accurate control. An imported chain is used for the main gripper transmission, with strength increased by 45% for accurate stability and prolonged life.

05
Electrical Cabinet
Electronic components are all world-

famous, high quality ensured.

06
Plates Quick Change Device
Shorten the time for changing Plate, Improve the production

efficiency.

Now the price of stamping machine for paper is affordable, if you have needs, please contact us.

As a mature packaging machinery company, we are committed to continuously improving production efficiency and packaging technology level by promoting technological progress and service innovation in post-press packaging machinery manufacturing to achieve sustainable and high-quality development of the industry. We offer high-quality packaging machinery wholesale at competitive prices.