年表作成・共有サービス - pastport

https://www.growingmechanical.com/products/automatic-foil-stampingdie-cutting-machine/

We designed 1050FH automatic foil cutting machine, which is the greatest research and development and manufacturing of new equipment with a higher degree of intelligence.

This automatic hot foil stamping and printing machine adopts many international advanced pneumatic and servo-driven processing technologies. After strict quality control of assembly, our automatic foiling machine has the advantages of simple operation, safety and reliability.

This automatic foil printing machine can perform stamping, creasing and die-cutting operations after printing on paper, cardboard, corrugated paper less than 4mm, paste paper and laminated paper of 80g/m² or more.

When the speed of automatic foil stamping & die cutting machine reaches 7,500 sheets/hour, the good quality and design make the machine work stably as well as ensure safety. As one of the mature automatic die cutting machine manufacturers, we produce machines that will provide you with a comfortable operation and faster return on investment.

Features of Automatic Foil Stamping&die Cutting Machine
Feeder/Feeding Section
Imported high quality feeder, high precision，stable in high speed.

Four suction nozzles, four sending nozzles, ensure feeding smoothly.

Adopt imported screw air-blowing device, it could make the sheet send smoothly.

Suction angle and height can be adjustable.

Non-stop paper feeding device

Double sheet detecting system

Suction-blow two function vacuum pump

The design of stacker preparatory

stage was improved, it could use

prepared car sheet piling. Also could

use ordinary hydraulic car sheet piling

to stacker directly.

Feeding Positioning Section
The incline-type paper moving table top is more suitable to high-speed thin paper and location. Side location adopt dual purpose side device with pull guide and push guide, accounting to paper choose, it makes switch easier. It could switch front rise position arriving reduction of speed device, it is benefit of thin paper’s location.

Cutting Section/Horizontal and vertical foil stamping system
Adopt advanced technology with single gripper location could adjust the front-and-back registration. Horizontal hot stamping dual-anxis/Vertical hot stamping collection of waste foil frame into operation side, it is benefit of operation. 12 electric heating areas have timing penumatic temperature controller function, each area can be controlled separately. It makes foil-delivering servo curve tracking the speed variation of machine in time for using motion controller. So it could reach the foil-delivering smoothly.

Foil Stamping/ Die Cutting Section
The driving gear ensures high speed of die cutting together. The pneumatic locking mechanism and air clutch are fast and stable. The die cutting frame can prevent the die cutting plate from drooping or separating effectively.

Quick Changed Foil Device
Vertical under foil frame could be pulled out of machine, so that it could make the foil work more convenient.

Rewinding Device
There has brush rewinding foil function. And it has equipped with a re-coil collection waste foil device. The buffer force prevent the foil from broken.

Delivery Section
Delivery section add tester into security system. It is equipped with inset counter. Using subsection could adjust brush and sheet air-blowing device, so the finished product of delivery section could product stably. Gripper drive train expanded buffer device. A non-stop paper delivery device bring high efficiency and fast return.

Specification of Automatic Foil Stamping&die Cutting Machine
Machine Parameters:
Max.   Paper Size                                               1050×750 mm
Min.   Paper Size                                                400×360 mm
Max.   Cutting Size                                           1040×720 mm
Max.   Foil Stamping Size                                     1020×600 mm
Inner   Chase Size                                              1080×745 mm
Steel   Plate Size                                               1080×736 mm
Processed   Materials          Cardboard：80~2000 g/m²    Corrugated Paper：≤4mm
Max.   Pressure                                                    300 N/cm²
Gripper   Margin                                                      8 mm
Max.   Working Speed                                              7500 s/h
Total   Weight                                                      16.8 T
Dimension   (L×W×H)                                  7060×4200×2230   mm
Max.   Feeding Pile Height                                         1550   mm
Max.   Delivery Pile Height                                         1400   mm
Foil   Shaft                                                          V3+H2
Vertical   foil stamping section performance specification
Max. Foil Width                                                 1020 mm
Min. Foil Width                                                   25 mm
Max. Length of Pull Foil                                           700   mm
Max. Diameter of Foil                                           Φ 240mm
Horizontal   foil stamping section performance specification
Max. Foil Width                                                  600   mm
Min. Foil Width                                                     25 mm
Max. Length of Pull Foil                                          1020 mm
Max. Diameter of Foil                                               Φ200 mm
Foil   stamping system&other comprehensive performance specification
Stamping temp. adjustable range                                  0℃~200℃
Heating zones                                                          12
Heated Plate Power                                                    24 kw / 24kw
Total Power                                                          57 kw
Voltage Requirements                                               380V   50Hz
Air compressor                                         0.8Mpa, 0.36m² /min

Configuration：
No.AccessoryBrandPlace   of Origin
1Photoelectric SwitchSUNXJapan
2HMIWEINVIEWTaiwan
3ButtonSCHNEIDERFrance
4A.C. ContactorSIEMENSGermany
5Solid State RelayFOTEKTaiwan
6PLCMITSUBISHI/PANASONICJapan
7Electric HornQLIGHTKorea
8Magnetic ValveSMCJapan
9Oil-water SeparatorAIRTACTaiwan
10Motor BreakerSIEMENSGermany
11Servo MotorYASKAWAJapan
12Main MotorTECOTaiwan
13Gear MotorCPGTaiwan
14Oil Pressure SwitchARKKorea
15Pneumatic ClutchOMPIItaly
16Paper Feed ClutchMIKIPULLEY/OGURAJapan
17Torque LimiterJASUTaiwan
18Indexing DrivesTAN TZUTaiwan
19Vacuum PumpBECKERGermany
20FeederYONGCHUANTaiwan
21Feeder NozzleSILENTSweden
22Tooth Row Drive ChainRENOLDBritain
23Other Drive ChainTYCTaiwan
24Tooth RowJASUTaiwan
25BearingFALA/IKOGermany/Japan
26Rotary JointsDEUBLINAmerica
27Timing BeltOPTIBELTGermany
28Paper Feed BeltCODONBELTSwitzerland
29Mould Coil SpringTOHATSUJapan
30Worm&Worm WheelLIMINGTaiwan
31Oil Temp.Conditioning SystemWLPTaiwan
32Cooling FanSUNONTaiwan
33Heat ExchangerLEINIXAmerica
34Lubrication   PumpYONGSHENGTaiwan
35EncoderOMRONJapan
36Sealing RingCTYGermany
37Frequency ConverterYASKAWAJapan
38Body MaterialDuctile Iron QT600-3
Note：the accessories of machines can be changed in the process of upgrading, with no less than the existing brand quality, the seller will reserve the right, no longer separate notification.

Highlights of Automatic Foil Stamping&die Cutting Machine

01
Pneumatic Clutch
The high quality pneumatic clutch reduces noise and minimizes impact when stopping the machine at a high speed.

02
Lubrication System
With a programmable lubrication system, the accurate control of PLC ensures balanced lubrication of the machine.

03
Vacuum Pump
Adopt imported equipment, improve the stability of the machine, low noise, high performance, long service life.

04
Gripper and Chain
The grippers are made of special extra hard aluminum alloy, with anode treatment on the surface, ensuring accurate die cutting and embossing, etc. at high speed. The adjustment mechanism, patent design guarantees very accurate control. An imported chain is used for the main gripper transmission, with strength increased by 45% for accurate stability and prolonged life.

05
Electrical Cabinet
Electronic components are all world-

famous, high quality ensured.

06
Plates Quick Change Device
Shorten the time for changing Plate, Improve the production

efficiency.

If you are looking for a reliable packing machine company, don't hesitate to contact us!