年表作成・共有サービス - pastport

https://www.guonuogz.com/products/vertical-l-sealing-pe-film-shrink-wrapping-machine/

This full-automatic L-type vertical PE film shrink wrapping machine is a full-automatic shrinkage packaging machine with a high degree of automation, which can automatically complete the steps of feeding, film covering, sealing, and cutting, shrinkage, and so on. Its work efficiency is high, and the output per minute can reach 20-35 pieces. This vertical shrink wrap machine series is suitable for the thermal shrinkage of POF and BOPP films, and the packaging effect is not wrinkled. The shrink packaging machine is appropriate for batch production packaging lines, especially for products with higher and larger sizes. You can find the existence of this PE film wrapping machine series widely in printing, color boxes, greeting cards, photo albums, photo frames, medicine, electronics, daily chemicals, cosmetics, auto parts, hardware, food and other industries.

VERTICAL L SEALING PE FILM SHRINK WRAPPING MACHINE PARAMETERS
Machine ModelGNL-5545D（Vertical L Sealer）GNS-5030LW(Shrink Tunnel)
Packaging SizeL＋H＜500mm  W＋H＜400mm  H＜150mmL1500×W500×H300mm
Packaging Speed0-40 bpm（according to product size）
Height of Table820mm±50mm
Suitable FilmPOF/PE Shrink Film
Power Supply220Vac  50Hz380Vac 50Hz
Power3KW13KW
Max Current10A/
Air Pressure6kg/cm3/
Net Weight400kg350kg
DimensionL1850 X W1400 X H1300mmL1800×W990×H1300mm

VERTICAL L SEALING PE FILM SHRINK WRAPPING MACHINE MAIN PARTS CONFIGURATION
No.NameQtyBrand
1PLC1OMRON, JAPAN
2Touch Screen1MCGS
3Circuit Breaker10SCHNEIDER, FRANCE
4Temperature Controller3OMRON, JAPAN
5Ac Contactor2SCHNEIDER，FRANCE
6Material Induction Switch4BONNER, USA
7Motor5MAILI, CHINA
8Solid-state Relay3OMRON, JAPAN
9Air Cylinder1SHAKO（TAIWAN, CHINA）
10Cylinder Solenoid Valve1SHAKO（TAIWAN, CHINA）
11Air Filter1SHAKO（ TAIWAN, CHINA ）
12Proximity Switch4SICK, GERMAN
13Conveyor Belt3SIGLIN,GERMEN
14Power Switch1TIANYI,CHINA

VERTICAL L SEALING PE FILM SHRINK WRAPPING MACHINE FEATURES
01
The waste shrink film is automatic recycled by a separate motor, which will not crack due to too loose or too tight, and the waste shrink film is easy to disassemble.

02
The product conveying of this vertical L sealer adopts solid steel rod wrapped with an imported silicone hose, which is durable.

03
The sealing part is driven vertically up and down, and the sealing contact surface is uniform. The vertical drive can overcome the problems of wrinkle and sealing line not in the middle of the product in the traditional "L" automatic sealing and cutting packaging machine, and achieve excellent sealing effect.

04
Our vertical shrink wrap machine adopts advanced PLC programmable controller, with safety protection and alarm device, and the sealing and cutting system is reliable. The maintenance and operation are very simple.

05
The feeding length of this L-type case sealer machine is controlled simultaneously by the combination of electric sensor to accurately control the length of shrink film.

06
Install two sets of horizontal and vertical electric sensor to facilitate switching and selection. Even for thin or small packages, sealing and packaging can be easily completed.

07
For products with different packaging heights, the lifting and lowering of the sealing knife is driven by the motor, which can be adjusted by the position of electrical sensor.

08
GNS-5030LW PE film wrapping machine adopts an imported double air survey motor, so that the hot air in the furnace cavity is evenly distributed, and the effect after shrinkage is more beautiful.

09
The inverter controls the transmission speed and stepless speed regulation.

10
The super large air volume cooling system can quickly cool and finalize the shape of the product after heat shrinkage. The aluminum workbench can be selected at the rear end.

11
This vertical PE film shrink wrapping machine is suitable for sealing, cutting and shrinking packaging of tea gift bags, frequency converters, TP-Link, computers and other medium-sized objects.