NEMA 24T SQUARE STEPPER MOTOR

(2023年)

https://www.hemotors.com/products/nema-24t-square-stepper-motor.html
NEMA 24 is a standard hybrid stepper motor, the step angle is 1.8°, but it is a 3-phase one.

NEMA 24T SQUARE STEPPER MOTOR BODY SIZE

NEMA 24T SQUARE STEPPER MOTOR CHARACTERISTIC PARAMETER
STEP ANGLE1.2°±5%
NO. OF PHASES3
RATED VOLTAGE3.0 V
RATED CURRENT5.0 A
RESISTANCE0.6 ohm±0.15 AT 25°
INDUCTANCE2.3 mH±20% AT 1kHz, 1Vrms
HOLDING TORQUE1.5 N.m(211.5 oz.in)TYP.
RUNNING TORQUE(AT --PPS)--V.DC, --A/PHASE
DIELECTRIC STRENGTH500V A.C/MIN.
INSULATION RESISTANCE100MΩ+/MIN.
INSULATION CLASSCLASS B
TEMPERATURE RISE80K MAX.
ROTOR INERTIA780 g.cm²(4.29 oz.in²)
WEIGHTAPPROX. 1250g(437.5 oz)
ALLOWABLE THRUST LOAD15N
ALLOWABLE RADIAL LOAD75N(ON THE SHAFT END)
OPERATION AMBIENT TEMP.‘-20℃---+50℃
OPERATION AMBIENT HUM.15%----90%
LIFE5000HOURS

NEMA 24T SQUARE STEPPER MOTOR TORQUE CURVE
SPEED VS TORQUE CURVE
MODEL: HEM-24T6303
LOT NO.: 030919
VOLTAGE24V.D.C○SUPPLYWINDING
CURRENT4.5A/PHASE○PEAKAVE
EXCITATION
DRIVE CIRCUITI DRIVE-4UNIPOLAR#BIPOLAR
INERTIA LOAD--g-cm2

If you want know more about stepper motor problems solutions, please visit our website.