年表作成・共有サービス - pastport

https://www.hiconics-global.com/products/380v-0.4-800kw-construction-all-in-one-machine.html

Simple installation: without changing the original frequency electrical box, only the frequency converter needs to be added and the resistance box can complete the transformation work. Good anti-vibration performance: for the mechanical characteristics of the lift in operation, the whole machine is tested for anti-vibration by the vibration test bench at the factory. No need to set parameters: correctly connected to the motor line and control line, the machine can be turned on and work normally. Good comfort: no overshoot and weightlessness at start-up, smooth stopping, precise leveling and no bottoming out.

Specification of 380V/0.4-800kW Construction All-in-one Machine

ItemSpecifications
Main control
functionsMaximum
frequencyVector control: 0~600Hz
VF control:0~1200Hz
Carrier Frequency1k ~ 15kHz; the carrier frequency will be automatically
adjusted according to the load characteristics.
Input frequency
resolutionDigital setting: 0.01Hz
Analog setting: maximum frequency ×0.1%
Control modeOpen loop vector control ;
V/F control.
Start-up torqueMode G machine: 0.5Hz/180% (open loop vector control)
Mode P machine: 0.5Hz/120% (Open loop vector control)
Speed adjustment
range1：200（Open loop Vector flux control）
Main control
functionsStable speed
PrecisionOpen loop  Vector flux  control：≤±0.5% (rated synchronous
speed)
Stabilization of
speed controlOpen loop  Vector flux  control：≤±0.3% (rated synchronous
speed)
Torque response≤40ms(Open magnetic flux vector control)
Overload capacityMode G machine: 150% rated  current 60s; 180% rated current 5s
Mode P machine: 130% rated current 60s; 150% rated current 5s
Torque boostAutomatic torque boost; manual torque boost 0.1% to 30.0%
V/F curveLinear V/F, Multi-point V/F, and Square V/F
Speed-up andStraight line or S curve speed-up and speed-down mode;
four kinds of speed-up and speed-down time;
Speed-down curveSpeed-up and speed-down time ranges from 0.0s
to 3000.0s
DC brakeDC brake frequency: 0.00Hz ~ maximum frequency; brake time: 0.0s ~ 36.0s, and brake current value: 0.0% to 100.0%.
Jog controlJog frequency range:0.00Hz ~ 50.00Hz;
Jog speed-up/speed-down time: 0.0s ~ 3000.0s.
Simple PLC and
multi-speed runningIt can realize a maximum of 16 segments speed running via the built-in PLC or control terminal.
Built-in PIDIt is easy to realize process-controlled close loop control system.
（AVR）Automatic
voltage regulationIt can  keep constant output voltage automatically in case of change of mains voltage.
Torque limit and
control"Shovel" characteristics, automatic limit on the torque on running time, preventing frequent over-current trip; closed loop vector mode can realize the torque control
Customized functionsPeripherals
self-detection upon
power-onIt can  conduct safety detections on  the peripherals upon power-on, including earth and short circuit detections.
Shared DC bus
functionIt can realize the function that multiple inverters share the DC bus.
JOG keyProgrammable key: Select the forward and reverse rotations/jog operation command.
Traverse frequency
controlMultiple triangular-wave frequency control function.
Fast current limit
functionWith fast current limit algorithm built in to reduce the probability of over-current alarm; to improve the anti-jamming capacity of the whole machine.
Timed controlTiming control function: Setting time range from 0h to 65535h.
Keyboard extension
line standardizationCustomers can use standard cable to extend the keyboard
Operation
functionRunning command
channelThree types of channels: operation panel given, control terminal given and serial communication port given. These channels can be switched in various ways.
Frequency sourceTen types of frequency sources in total: digital given, analog voltage given, analog current given, pulse given, and serial port given. It can be switched in various ways.
Auxiliary frequency
sourceTen types of auxiliary frequency sources in total. It can implement micro tuning and synthesis of auxiliary frequency.
Input terminalSeven digital input terminals, and nine terminals in maximum
(AI1, AI2 can be used as DI terminals), it has compatibility to
PNP or NPN input method.
Two analog input terminals, in which AI1 only be used for
voltage input, and AI2 can be used as voltage or current
input. (if expanded- input or output terminal function is
needed, please use HIC580 series.)
Output terminalOne digital output terminal (bipolar output)
Two relay output terminal
Two analog output terminals, with optional 0/4mA to 20mA
or 0/2V to 10V. It can realize the output of set frequency,
output frequency and rotation speed etc.
Display and Keyboard
OperateLED displayDisplay parameter
LCD displaySelective parts, Chinese/English to suggest the operation
content
LCD Parameter copyUse LCD parameter special copy keyboard can copy the
parameter quickly
Key lock and
function chooseLock part of the keyboard or the whole keyboard, definite the
function range of some keys to avoid mis-operation.
Protection
and select
accessoriesprotection functionShort circuit detective of power-on motor, input and output
open-phase protection, over-current protection, overvoltage
protection, under-voltage protection, over-heat protection,
over-load protection etc.
Selective accessoriesLCD operation panel, brake group etc.
EnvironmentSuitable placeIndoor environment which is against from direct sunlight,
dust, corrosive gas, combustible gas, oil mist, vapor, water
drop and salt.
AltitudeLess than 1000m
Ambient
Temperature-10℃ ~ +50℃ (derating is required if the natural temperature
range is 40℃ ~ 50℃)
HumidityLess than 95%RH, no condensing water drops
VibrationLess than 5.9m/ s2 (0.6g)
Storage temperature-20℃ ~ +60℃
Class of pollution2

VFD Application Industries and Fields

HIVERT Standard medium voltage VFD series is widely used in various fields in national economy, exported to Europe, Middle East, Southeast Asia etc.. Perfect solutions for soft start, speed adjusting, energy saving and intelligent control of medium voltage AC motors (including synchronous and asynchronous motors) could be supplied to customers. Typical application industries are:

For more information about china frequency inverter and vfd single line diagram, please feel free to contact us!

There are many vfd manufacturers, but we are one of the best choices for you.