年表作成・共有サービス - pastport

https://www.jinggongmachine.com/products/eps-sandwich-panel-production-line.html

Main structure features of EPS Sandwich Panel Machine
1)This EPS sandwich panel making machine has the specification: nice appearance, low noise and high efficiency.
2)The EPS sandwich panel production line is welded by H-beam with shot blasting treatment on the surface, so the whole structure is simple and stable.
3)Consecutive laminating body transmission adopts worm and worm gear in order to control the producing speed steadily. The consecutive laminating body can cut to length with the advanced frequency control.
4)Three groups heating system to adapt the environmental temperature in different places.
5)Glue Providing system is driven individually. The horizontal compound, glue evenly, without any pollution.
6)Consecutive laminating body is long to guarantee the flatness of the sandwich panel.
7)The moving stroke of the cutting system is long to extend the life of the cutting tool.

Contact us for EPS sandwich panel machine price! Or contact us for more information about other

Main Technical Parameter of EPS Sandwich Panel Production Line

specification of Sandwich panel produced by Jinggong eps panel machine:Length: Min cutting length is 2 m
Max cutting length is 15mWidth: (see profile drawing)
Thickness: (see profile drawing)

Raw material specification:
coil thickness: 0.4~0.6 mm(steel be flat without ups and downs, deformation and bending)sheet yield stress: 5235MPa
coil max width: 1200 mm (tolerance12mm)coil max weight: 4T
coil lD: $500 and $600 mmcoil OD: 1000 mm
EPs material: density isz18 ks/m3,unstraight of each side s1 mm/m, curve s3mm/m, surface be even, unevennesssmaller than 1.5mm/m,EPs material single piece length more than 3m.
Material suitable shape: see profile drawing
Material suitable width: minimum shall be 1/2mm of the finished panel width.

EPS panel production line specification:
Work line speed:1000-3000mm/min (frequency speed adjustment).Attention: depending on glue brand, temperatureand proficiency of operators.
Machine length: about 40 m
working height: 1050 mm ( panel output height )Laminating effective length: 7.5m
Control way: adopt industrial computer PLCTotal power: about 35 kw
Power: 380V/3phase/50 Hzcontrol voltage: 24 V/110 V/220 v
pneumatic: 0.7 Mpa (self-prepared by the factory)best working temperature: around 25℃

Main Structure Components Of EPS Sandwich Panel Production Line
This EPS sandwich panel line consists of one roll forming machine and one laminating machine. It adoptsinternational roll forming technology,laminating transmission technology, air-actuated and electric& hydrauliccontrol technology. The whole EPS panel production line only needs 6 or 7 workers.
The whole sandwich panel machine line consists of two parts: roll forming part and laminator part.1)Roll forming part
The roll forming machine consists of a hydraulic uncoiler, guiding system, filming system, flat sheet slitting system,roll forming system, panel support frame, assistant forming machine and so on.
2)Laminating body
This part consists of a guiding device, laminating body, cutting system, glue feeding system, support device andelectric control system, etc.

Jinggong is a professional roll forming machine company, we provide sandwich panel machine, steel frame machine and etc. Want to know more? Please contact us.