SBS Polymer Modified Bitumen Plant

(2020年04月04日)

http://www.metongmachine.com/products/bitumen-plant/sbs-polymer-modified-bitumen-plant.html

Features
SBS modified bitumen application
As a pavement material, SBS modified bitumen is applied widely in high-grade highways, urban roads, airport runways and other important traffic on the road. While, polymer modified bitumen also can be used in wearing layer (drainage or suction sound) and waterproof layer(under seal coat); in stress absorbing film middle-layer, to reduce reflection crack; in old road pavement ; in thin and super thin bitumen surface layer plus for the overload traffic road of old pavement, to improve durability; in surface treatment of old pavement or new General Highway, to recovery pavement using performance or reduced conservation workload.
1. High-temperature resistance, low-temperature resistance, strong adaptability;
2. Good toughness, anti-fatigue, increases the bearing capacity of pavement;
3. Resistance to water, oil and UV radiation and slows down aging;
4. Stable performance, long service life, lower maintenance cost.
Brief introduction of SBS Polymer Modified Bitumen Plant
ZHETONG MTG15 SBS Polymer modified bitumen plant is advanced processing technology is particularly suitable for modification processing SBS, SBR, MAC and other modifiers. HMI and PLC using a combination of control methods, can visualize the entire production process unfolded, Centralized control, Easy to operate. The key parts and components selected international advanced level of high-quality products imported or domestic products, Greatly improving the reliability of equipment operation.
Advantage of SBS Polymer Modified Bitumen Plant
1. The advanced processing technology is particularly suitable for SBS, SBR, MAC modifier, such as processing, the stability of coupled with proprietary technology, solve the segregation of PMB.
2. High shear colloid mill: Core of SBS modified bitumen plant, the gap is adjustable (0.01mm-20mm).
3. Bearing oil seal and other main parts adopt Japan brand imported; The bearing block with the water circulation cooling device; The colloid mill with heat-conducting oil system, covered with closed-end insulation devices.
4. Automatic control for the two premixed tanks working alternately.
5. Control system with HMI and PLC can monitoring the entire production process image visually displayed, centralized control and easy operation.
6. Key parts and components are selected from international imported or domestic top brands, greatly improving the reliability of equipment operation.
7. Modular design is easier for installation&testing and rapid production. The plant can be used with bitumen factory, asphalt mixing plant.
Main Parameters
CategoryItemParameter
MTG15MTG20
General ParametersProductivity15h / h20T/h
Operating Voltage380V/50HZ380V/50HZ
Total Power≤125kW≤132kW
Main PlantDimension11500 × 2200mm × 2500mm, 15h11500 × 2200mm × 2500mm, 15h
Weight
Ratio100: 1-100: 10100: 1-100: 10
Structure TypeContainer TypeContainer Type
MeasuringBitumenFlowmeterFlowmeter
Polymer EditFrequency screw+Weight Loss ScaleFrequency screw+Weight Loss Scale
Mix dispensing systemHigh shear colloid mill15t/h, 45kW20t/h, 55kW
Base Asphalt Pump680L / min, 11kW680L / min, 11kW
Base Asphalt PumpFilter50m³/h50m³/h
Spiral plate heat exchanger100㎡100㎡
Temperature SensorPT100PT100
Premix tank4m³4m³
Modifier Powderfeed screw6m³/h, 4kW6m³/h, 4kW
ModifierWeighing hopper0.7m³1m³
Mixture Output Pump400L / min, 7.5kW400L / min, 7.5kW
Air supply systemAir Compressor0.7m³ / min, 3kW0.7m³ / min, 4kW
Control systemInverterM440M440
Reactor SystemReactor Tanks25m³25m³
Mixer
Delivery Pump680L / min, 11kW680L / min, 15W
Heating SystemOil Boiler800,000KCAL800,000KCAL

sbs-polymer-modified-bitumen-plant-1.jpg

コメント