年表作成・共有サービス - pastport

https://www.mikrometry.com/common-fault-analysis-of-digital-push-pull-force-gauge.html

The push pull gauge digital needs to be operated in the correct way when using it. If it is used improperly, it is easy to malfunction. When using it, we must not only understand the correct use of the digital push-pull force gauge, but also master its troubleshooting methods.

Common failure analysis of digital push-pull force gauge

1. The digital push pull gauge crashes unexpectedly and no response when pressing any key

Solution: the 6 pins and 9 pins of the data interface should be short-circuited with wires, and then restart or press the "reset" switch on the side of the instrument, and then restart.

2. Nothing is displayed when you press the "Power On" button

Solution: It is very likely that the force gauge meter battery is out of power and needs to be recharged (the indicator light on the charger will be on).
3. It will automatically shut down after starting up or it will shut down automatically during use and cannot be charged (the indicator on the charger is off)

Solution: replace the charger for the force gauge push-pull.

4. The test value of the digital push-pull tensile force gauge is inaccurate and the test value error is too large

Solution: send it to the metrology department for correction

5. The parameter settings of the digital push-pull force gauge are confused or set incorrectly

Solution: long press the "settings" button for more than 4s, it will automatically shut down after hearing the beep, and then restart it.

6. The digital force gauge meter will beep or display a larger value when it is turned on

Solution: first make sure that under the premise of no external force, long press the "settings" button for more than 4 seconds to restore to the factory settings. If the digital push pull force gauge still fails to return to normal, you can contact Mikrometry

What Are the Applicable Industries of Push Pull Force Gauge?
The Electroplating Factory Measures the Coating Thickness by Coating Thickness Instrument
How to Choose a Portable Coating Thickness Instrument?
How to Choose the Suitable Leeb Hardness Tester?

If you need any kinds of force gauge meter, please contact us, as a professional measuring instruments companies, mikrometry is willing to offer you high quality products.