年表作成・共有サービス - pastport

Online Diameter-measuring Particle Size Analyzer

1. Product Overview 
Particle Size Analyzer (PSI) is a kind of intelligent automatic industrial online real-time granularity detection equipment. The Particle Size Analysis Pdf detection results are intuitive, stable and reliable.

2. Product Principle 
PSI is based on the principle of directly measuring the microscopic approximate diameter size of the particles to be measured and performing probabilistic statistical analysis on a certain amount of particle microscopic diameter dimensions, and finally obtaining the macroscopic Particle Size Analysis Methods value of the particle group.

3. Product Features

Strong environmental adaptability: Particle Size Analyzer Principle can adapt to the harsh industrial site environment.

Highly corrosive environment: The probe is made of corrosion-resistant materials and can adapt to most corrosive environments such as strong alkalis.

There are no special requirements for the composition of the materials to be measured: it is not affected by bubbles; it is low affected by large particles; it is not affected by magnetic interference.

The detection range of particle size is wide: the maximum size range of 60 percentage points can be detected, and the minimum size range of 20 percentage points can be detected.

The size fraction span is large: The Particle Size Analyzer For Nanoparticles can be achieved in the diameter of the grain between 20μm to 1000μm.

4. Product Parameter
The maximum detectable flow channel number           1

The number of size fraction that can be detected at the same time in each channel   ≤2

The grain diameter range that can be detected (μm)  20 ～ 1000

The nominal detectable particle size interval per size fraction (%)

Size fraction

Interval

 μm：-75 ～ -850

mesh：200 ～ 20

20 ～ 80

μm：-45 ～ -75

 mesh：325 ～ 200

30 ～ 70

μm：-25 ～ -45

 mesh：500 ～ 325

70 ～ 95

Maximum nominal particle size span (percentage point) 30

the absolute error in the 1σ (%)                1 ~ 2

Analog output：4 ~ 20mA

Level of protection：detector：IP65；main control box：IP54

Ambient temperature：0 ~ +50℃

Medium environment：1 ~ 90℃

Medium pressure：86 ~ 106KPa

Power supply：220V AC，50Hz，50W

5. Product Application

It is mainly used to detect and analyze the particle size of the hard grain in the liquid and solid mixture slurry. PSI can be used in the grinding and dressing fields of black metal industry, basic metal industry, industrial mineral industry, and gold industry.

https://www.dfmc-tec.com/particle-size-analyzer/