年表作成・共有サービス - pastport

Product introduction

The roller conveyor adopts high-quality standard roller accessories, or adopts well-known brand rollers according to customer requirements, so the roller conveyor has the corresponding linear conveying, non-powered conveying and other functions.

Structure and characteristics
  

1.Power roller conveyor is an important type of roller conveyor.
2.The driving device transmits the power to the drum, rotates, and conveys the articles through the friction between the surface of the drum and the surface of the conveyed articles.
3.Each roller of the former is equipped with a separate driving device, and the brake is easy to disassemble. Or some rollers as a single, driven by a driving device to reduce equipment costs.
4.Power roller conveyors are generally driven by AC motors, and also driven by two-speed motors and hydraulic motors as required.
Power roller conveyors may be divided into linear power roller conveyors, turning power roller conveyors, power roller conveyors, free power roller conveyors, heavy-duty power roller conveyors, rubber-coated power roller conveyors;
5.The size of the roller transmission line can still be specified by the customer. The internal width of the power roller conveyor can be made according to customer requirements. The standard turning inner cavity of the turning conveyor belt is generally 300, 600, 900, 1200mm, etc., and other special ones can also be used according to customer needs Mode specifications.

6.The roller diameters used by the power roller conveyor are 38, 50, 60, 76, 89mm, etc. The taper of the turning power roller conveyor will be designed according to the size, weight and linear speed of the transported object.
7.The frame material of the power roller conveyor is generally made of stainless steel, aluminum profile, carbon steel sprayed plastic, etc.;
8.The power modes of the drum transmission equipment include electric drum drive, geared motor drive, etc.; its transmission modes include double sprocket, single sprocket, flat friction transmission belt, O-belt, timing belt, etc.; speed regulation methods include stepless speed change, frequency conversion Speed control, etc.

Technical parameters

 

1.Equipment process length (L) standard series: L = 600mm, 900mm, 1200mm, 1500mm, 1800mm, 2100mm, 3000mm, 3600mm;

2.Equipment conveying surface width (W) standard series: W = 400mm, 500mm, 600mm, 750mm, 900mm;
3.The distance between the power rollers is ≤127mm or is designed according to the characteristics of the conveyed material, generally no less than three rollers support the smallest conveyed material;
4.Equipment working surface height (H): H = 400mm~1400mm (customizable);
5.Equipment use speed (V): V = 15 m / min ~ 120m / min (customizable);

6.Important conveying accessories of the equipment: conveying roller, roller mandrel, transmission parts, etc.

https://www.efuequip.com/roller-conveyor-system/