年表作成・共有サービス - pastport

https://niceone-tech.com/products/capacitive-membrane-switch.html

This company touch screen hmi panels, marine membrane switch panel, illuminated membrane switch, capacitive membrane switch, fpc membrane switch, graphic overlay membrane and so on.

Niceone-tech customized touch screen hmi panels and custom membrane switches will be based on product application, circuit density, conductivity, resistance, whether many electronic components are required, operating environment, customer budget and whether to pay attention to silver migration.

When molding silicone rubber products, if the vulcanization temperature is increased, the vulcanization time can be shortened and the vulcanization efficiency can also be effectively improved. Therefore, many vulcanizations molding practitioners in the early stage in order to accelerate the molding speed of custom silicone rubber keypads will start on the increase in temperature. Sometimes it does shorten the curing time, but sometimes it's self-defeating, and instead of increasing productivity, there's a whole bunch of numbness and rupture.

Why does this happen?

In fact, silicone, rubber vulcanization temperature cannot indefinitely increasing, because of the silicone and rubber is a polymer, high temperature can cause the rubber chain output cracking reaction, crosslink rupture, resulting in " sulfide to return the original " phenomenon, resulting in a decline in the physical and mechanical properties of the silicone, rubber products, namely we often say change and burst. According to the experience accumulated in the production process of some silicone rubber products, Niceone-tech suggests the vulcanization temperature of commonly used silicone and rubber as follows :

Suggestions for vulcanization temperature of natural rubber (NR ): the most reasonable range: 140 ~ 150℃, the highest not exceeding 160℃.

Vulcanization temperatures of butadiene rubber (BR), Isoprene Rubber (IR), and neoprene rubber (CR) are recommended: the most reasonable range: 150 ~ 160℃, the highest not exceeding 170℃.

The vulcanization temperature of SBR and NBR is recommended: the vulcanization temperature can be over 150℃, but the highest is not more than 190℃.

The vulcanization temperature of butyl rubber (IIR ) and ethylene-propylene-diene diene rubber (EPDM ) is recommended: the most reasonable range is 160 ~ 180℃, the highest is not more than 200℃. The thermal vulcanization temperature of silicon rubber (SR ) and fluorine rubber (FR ) is recommended: the most reasonable range is 170 ~ 180℃. If secondary vulcanization is needed, the secondary vulcanization temperature should be controlled at 200 ~ 230℃, and the time should be controlled within 4 ~ 24H according to the process requirements.

Efficiently

This company touch screen hmi panels, marine membrane switch panel, illuminated membrane switch, capacitive membrane switch, fpc membrane switch, graphic overlay membrane and so on.