年表作成・共有サービス - pastport

https://www.sibaicnc.com/cnc-machining-stainless-steel/

How does Sibai choose cnc stainless steel milling cutters?

Due to the high toughness, high thermal strength and low thermal conductivity of stainless steel materials, the deformation during cutting is relatively large, and the hardening during process is serious. The more to cut, the more difficult it is to dissipate heat, resulting in a rapid increase in the temperature of the tool tip, resulting in built-up edge. The built-up edge can easily take away the coating on the tool tip itself, aggravate the wear of the tool, affect the roughness of the tool surface, and also affect the surface quality of the workpiece.

Therefore, it is very critical to correctly select the geometric angle and cutting amount of the tool.

From the past processing work, Sibai summed up the following experience in selecting stainless steel milling cutters:

Cobalt is an very important element for milling tools. Without high-content cobalt, the milling tools are easy to wear off. And the milling tools special for stainless steel must be with special surface coating.

Stainless steel milling tools are classified into 3 categories in terms of materials.

1.Tungsten and cobalt milling cutters, such as YG3, YG6.

2. Tungsten-cobalt-titanium milling cutters, such as YG15, YG30.

3. Generic classes such as YW series.

Generally, YG-types have good toughness and thermal conductivity, and is not easy to stick, and is generally used for rough machining of stainless steel.

While YW-types are relatively good on hardness, wear resistance and heat resistance, oxidation resistance, and toughness, so it is generally used in the finishing of stainless steel.

When processing austenitic stainless steel such as 1Cr16Ni9Ti, it is not suitable to use YT-type, because the titanium in YT-type will have an affinity with the titanium in the workpiece, which will be discharged together with the iron chips, which will speed up the wear of the tool.

What will Sibai consider when purchasing stainless steel raw materials?
There are many stainless steel suppliers in the Chinese market. Some are manufacturers, some are distributors, and some are retail stores. Quality and service capabilities are quite different among them. Therefore, the purchase of stainless steel needs to be very cautious.

When purchasing stainless steel, we must consider the following aspects to avoid purchasing failure. The failure of raw material procurement is not only a failure of raw material itself, but also a failure of machining, a failure of logistics and shipping, a failure of customer imports, a failure of usage and function performance. Therefore, raw material procurement is a source of order success.

In the past 20 years, Sibai has continuously summed up the experience of raw material procurement. Now we summarize the following aspects on stainless steel procurement.

1.Clarifying requests.

When requesting from suppliers, we must get clear the requests, and describe the requirements in details. The requests including grades, specifications, tolerances, specific uses, precautions, and material certificates, we must describe exactly.

2.Selecting big-brand manufacturers.

For large-scale purchases, we are sure to choose big-brand manufacturers. Large manufacturers are important factors to avoid risks. If you choose low prices when purchasing, it is easy to have problems in quality. The big brand manufacturers are more reliable in terms of quality and reputation.

3.Attention to the chemical composition and physical properties of the material.

When purchasing materials, we must ask the supplier to provide material certificates. We pay much attention to the details on the certificates, such as production date and furnace number, etc. When we purchases large quantities, we require suppliers to provide a small piece sample before delivery, and use our spectrum analyzer to inspect the chemical composition of the samples. For example, 304 stainless steel, we need to focus on whether its chromium and nickel compositions meet the 304 standard. The lower than standard on chemical composition will affect the customer's later using function.

4.Attention to the specifications and their tolerances.

Before purchasing raw materials, we must clarify the specifications of the materials. Sufficient allowance should be left for processing. For example, if you buy a bar or tube of a certain outer diameter, you must give the supplier a clear tolerance range. Because if the tolerance range is not clear, it is likely to find that the machining allowance is insufficient after receiving it, which will affect the machining process.

5. When purchasing, it is also necessary to describe the use and processing method of the purchased stainless steel to the supplier. This will help suppliers understand the processing technology and application condition of stainless steel raw materials. Sometimes suppliers will also give reasonable advice to avoid the risks by our own lack of consideration.

6. After the materials are delivered to the warehouse, we must strictly inspect according to the requirements specified in the order. The strict inspections from quality, specification, weight, price and other aspects are necessary to ensure correct incoming materials.

Sibai has accumulated a large number of quality sured and long-term cooperated stainless steel suppliers in the Chinese market. So we can control the risk of purchasing stainless steel and purchase at the most reasonable prices.

Sibaicnc is a professional custom nut manufacturer, we provide machining precision, cnc machining stainless steel parts, cnc stainless steel parts, stainless steel cnc parts, cnc stainless steel machining, stainless steel cnc machining services, precision cnc machining service, etc. For more information, please feel free to contact us!