年表作成・共有サービス - pastport

https://www.sinofloc.com/the-difference-between-cationic-polyacrylamide-and-anionic-polyacrylamide.html

From the appearance, there is almost no difference. They are white particles or powdery solids. They can only be distinguished through small experiments!

1. Application of cationic polyacrylamide

(1) Sludge dewatering

According to the nature of sludge, the corresponding types of this product can be selected, which can effectively dewater the sludge by gravity before the sludge enters the pressure filtration. During dehydration, it produces large flocs, does not stick to the filter cloth, does not flow away during pressure filtration, uses less, has high dehydration efficiency, and the moisture content of mud cake is less than 80%.

(2) Treatment of sewage and organic wastewater

Cationic polyacrylamide shows positive electricity in acidic or alkaline media, so it is very effective to flocculate, precipitate and clarify the sewage with negative charge of suspended particles in the sewage, such as wastewater of alcohol factory, brewery, monosodium glutamate factory, sugar factory, meat food factory, beverage factory, textile printing and dyeing factory, etc. The effect of cationic polyacrylamide is several times or tens of times higher than that of anionic, non-ionic polyacrylamide or inorganic salt, because this kind of wastewater generally has negative charge.

2. Application of anionic polyacrylamide

(1). Industrial wastewater treatment

Anionic polyacrylamide has good effect on the treatment of wastewater with suspended particles ,high concentration, positive charge and neutral or alkaline pH value, steel plant wastewater, electroplating plant wastewater, metallurgical wastewater, coal washing wastewater and other wastewater.

(2) Drinking water treatment

The water source of many waterworks comes from rivers with high sediment and mineral content and relatively turbid. Although through sedimentation and filtration, it can not meet the requirements and flocculant needs to be added. The dosage is 1/50 of inorganic flocculant, but the effect is several times better than that of inorganic flocculant. For rivers with serious organic pollution, using inorganic flocculant in combination with cationic polyacrylamide from a cationic polyacrylamide factory can yield even better results.

(3) Recycling of losing starch and distiller's grains of starch plant and alcohol plant

At present, anionic polyacrylamide from an anionic polyacrylamide factory is added to flocculate and precipitate the starch particles, and then the precipitate is pressed and filtered by the pressure filter into a cake shape, which can be used as feed. The alcohol in the alcohol factory can also be dehydrated by anionic polyacrylamide and recycled by pressure filtration.

3. The molecular weights of cationic polyacrylamide and anionic polyacrylamide are also quite different

The molecular weight of cationic polyacrylamide is generally 5 million to 13 million.

The molecular weight of anionic polyacrylamide is generally 8 million to 25 million.

As an cationic polyacrylamide factory, we will do our best to meet all the needs of customers.

SINOFLOC is committed to being customer's most reliable supplier who could provide an extensive range of polymers and services, with high-quality and competitive-price to give customers additional value and high competitiveness.

If you want to know more uses of anionic polymer, please visit our website.