年表作成・共有サービス - pastport

https://www.szort-ts.com/drop-test/

The transit drop test is mainly to assess the impact of the drop impact test stress on the product caused by the fall during the use or handling of the product, which can be a carton drop test, package drop test, drop test for plastic container and drop ball test. To get drop ball test certificate, here are some test types.

Drop Ball Test Certificate floor: steel plate, wood board, cement floor, marble floor, carpet (according to the actual situation).
Falling method:
Drop Ball Test Certificate manual handling: edge drop, corner drop, face drop.
Drop Ball Test Certificate mechanical handling: falling of rotating surface, falling of rotating angle, falling of rotating edge, etc.

   
Ball Drop Test Procedure
A blow shall be applied to the enclosure under package drop test to check the protection against mechanical impact. 

During the drop ball drop test, the enclosure to be tested shall be mounted on a rigid support in accordance with the manufacturer's instructions for use. When a collision force with energy corresponding to the protection level of the enclosure under transit ball drop test is directly applied to the support base, if the displacement is less than or equal to 0.1mm, the support base is considered to have sufficient rigidity. 

If not specified in the relevant product standard, each exposed surface shall withstand 5 collisions. The parts of the collision shall be evenly distributed on the test surface of the enclosure to be tested. No more than 3 collisions shall be applied near the same part of the enclosure. The relevant product standard shall specify the impact site where the impact force is applied.

Drop Ball Test Certificate Judgment Criteria: ort ongoing reliability test Judgment criteria for acceptance of the enclosure under transit ball drop test, such as allowable damage and evaluation criteria related to the continued safety and reliability of the equipment, Third-party testing shall be specified

Drop Ball Test Certificate Standards

Maximum drop height: 2000mm

Applicable Drop Ball Test Certificate Standard
IEC 60068-2-32, GB/T 2423.7, MIL-STD-810H, GJB 150A, GJB 1032, GJB 360B, GJB 548B, YD/T 2379, ETSI 300 019-2, GR-63, GR- 487, IEC 60068-2-32,MIL-STD-810,GJB 150,etc.

Carton Drop Ball Test Certificate Standard
ISTA Series，GB/T 4857.5,ASTM D5276,ASTM D6179,ASTM D4169,GB/T 5398,etc.

Ball drop test standard
GB/T 20138,GB/T 2423.55, IEC 62262,IEC 60068-2-75, etc.

Ball impact test standard
GB/T 20138,GB/T2423.55, IEC 62262,IEC 60068-2-75, etc.

Drop Ball Test Certificate for Consumer Electronics
GB/T 2423.7,IEC 60068-2-32, etc.

There are many testing inspection and certification companies, but we are one of the best choices for you.