2 In 1 SPD for CCTV M10-24 D12BM Signal SPD

(2023年04月06日)

https://www.techwinspd.com/products/2-in-1-spd-for-cctv-m10-24-d12bm-signal-spd.html

2 in 1 monitor lightning arrester(power and video), a Kind of SPD, designed for analog video/ digital camera to protect camera power, video line from lightning electromagnetic pulse, induced over-voltage, operating overvoltage.

Feature of 2 in 1 SPD for CCTV M10-24 D12BM signal SPD
Multi. Protection circuits, Gas-Tube+ TVS technology

Dual protection in Common module and different module

2 in 1 protection

TVS array technology, low capacitance

Multi-Strike Capability

Application Of 2 in 1 SPD for CCTV M10-24 D12BM signal SPD
Designed to protect monitor equipments (Power, Video), widely applied in bank monitor & safe guard system.

Monitor equipment for school, enterprise, road etc. security and protection.

Technical parameters of 2 in 1 SPD for CCTV M10-24 D12BM signal SPD
ModelM10-12/D12BMM10-24/D12BMM10-220/D12BM
Lightning projection zone(LPZ)2
Standards ComplianceIEC61643-1, EN60950,GB/T18802.21-2002,TB/T2311-2002, YD/T1235.2
According to IEC61643III
According to DIN VDE6075 Part6(Draft 11.89) A1,A2D
Max continuous operating voltage Uc12VDC
Nominal discharge current (8/20µs) In3KA
Max discharge current Imax (8/21µs) Imax5KA
Transmission rate Vs100Mbps
Limiting Voltage(10/700µs)component wire-Enclosure40V
Nominal working voltage(Un)12V 24V 220V
Max continuous operation voltage(Uc)15V 30V 275V
Nominal discharge current Imax(8/20µs)5kA
Max discharge current Imax(8/20µs)10kA
Load current0.5A
Protection level Up ( In)60V 100V 900V
Response time (Ta)1ns
MountingBe Installed between protected equipment and signal line
Working conditions Clamped type
Dimension112*60*25mm
Interface formBNC
IP code(IEC EN 60529)IP20
Error rate≤10-12
Material/colorAluminum/Blue
Insertion loss≤.0.5dB
Working conditionsTemperature: -40 to 85℃, Relative humidity: ≤95％