Quarter Wave Surge Protective Device(SPD)N(L16)Access Network RF Protector

(2023年04月09日)

https://www.techwinspd.com/products/1-4-wave-rf-protector.html

Quarter wave RF surge protector is designed for the RF system, protecting the signal line of communication equipment from lightning over-voltage, induced over-voltage, induced over-voltage, and operation over-voltage. The RF coaxial lightning surge arrester/suppressor is widely applied in rf surge protection of wireless coverage, base station, etc.

Smart antenna, SDMA

IEEE G902 wireless LAN

IEEE 802.11b and 802.11g wireless LAN

PTN, MSPT

Transport Network

Access Network, FTTX, UTRAN

Base station antenna feeder

ISM

MMDS

Cellular

PCS

GPS

2G, 3G, 4G communication

GSM, CDMA, WCDMA, TD-LTE, FDD-LTE
Features Of 1/4 Wave RF Lightning Arrestor

Wide frequency band

Large discharge current

Extremely low insertion loss and VSWR

QWS technology

Good performance from DC to 3GHz

Low strike throughput energy

Withstand multiple lightning strikes

Bi-Directional Protection

Technical Parameters Of 1/4 Wave RF Lightning Arrestor
ModelR27DF-1/4R27NF-1/4R60NF-1/4R05NF-1/4
Lightning protection zone(LPZ)1-2
Class
According to DIN VDE 6075 Part 6 (Draft11.89)A1, A2C
According to IEC61643II
Max discharge current Imax (8/20µs) Imax50KA40KA40KA30KA
Working frequency0.8--2.7GHz0.8--2.7GHz2.3-6GHz0.4-0.5GH
Protection level In Up≤200v
Insertion Loss≤0.1db
Standing-wave ratio≤1.15
Interface formUHFNDINBNC
Working conditionsTemperature: -40 to 80℃, Relative humidity: ≤95%
Standards complianceIEC6000, EN60950
MountingBe installed between protected equipment and the signal line
Materialstainless steel +Copper/ silver white
IP codeIP20
Connector typeDINNNN

We can offer kinds of surge protector for sale, if you have needs, please leave us a message.

14-wave-rf-protector.jpg
14-wave-rf-protector-1.jpg
14-wave-rf-protector-2.jpg

コメント