年表作成・共有サービス - pastport

https://www.greatdrillbit.com/product/pdc-bit/
https://www.greatdrillbit.com/

During the drilling process of conventional PDC bit, based on the affection of the shearing action of PDC cutting teeth, most of rock debris obtained is mostly fine sand with very small size, which cannot be accurately geologically seized and evaluated.

The design concept of the core-while-drilling bit is to remove 1-2 teeth in the center of the normal PDC bit. During the normal drilling process, the core is continuously formed in the center area of the bit without affecting the cutting structure of the bit.

When the length of the small-sized core is continuously increased to the nominal length, it will contact a core destruction device and cut off the core using lateral force. There is a larger and deeper groove in the middle of the two front blades, and the small-sized core will move into the annulus through this hollow area. This hollow area is always kept open to prevent the risk of blockage of a drill bit.

Compared with the traditional PDC bits, the advantages of core-while-drilling bits are:

1. It can increase the mechanical drilling speed. The cutting surface of the common drill bit has the lowest drilling speed in the center position. The new drill bit avoids it.
2. It can improve the quality of cuttings and form micro-cores for geological analysis and evaluation without having to repeatedly drill, which saving costs.
3. The stability of the drill bit can be strengthened, and the central core column can effectively prevent the eddy and lateral vibration of the drill bit, so that the outer cone cutting teeth are prevented from being subjected to a large impact load, thereby improving the drill bit service life.

Our brand is GREAT, founded in 2010, specialized in processing research of steel and diamond materials, is involved in the R&D, design, production, and sales of petroleum equipment, No-Dig. Up to now, we have to be the top drill bit manufacturers in china of CNPC, SINOPEC, CNOOC. We have a 40,000 m² of production based in Hejian provincial development zone, Hebei, and several international advanced production lines featured in turning-milling compound, five-axis linkage, special for high-performance diamond processing, with the annual production capacity of more than 10,000 pcs. We provide the drill bits from 3" to 36", Rock reamer from 8- 72, Such as PDC bit, Tricone bit, Roller bit, Diamond Core bit, Bi-center bit, PDC reamer, Hole opener, etc.。If you need to buy drill bits for rock and concrete,please contact us.

We, Cangzhou Great Drill Bits Co. Ltd., specialized in R&D, design, production, and sales various drill bits. The drill bits size from 3" to 26" , HDD Hole opener from 8``- 48`` , Such as PDC bit, Roller bit, Tricone bit, PDC Coring bit, Bi-center bits, Hole opener, etc. The Company consistently adheres to the concept of industrial development to promote energy development, adhered to innovative drive, scientific development, and is one of the largest scale companies in Asia for PDC bit and Tricone bit, Hole opener manufacturer.

Our PDC bit production line includes Matrix body PDC bit and Steel body PDC bit. Tricone bit is mainly Three cone bits, and according to the drilling formation different, we have TCI bit and Steel tooth bit available. In some HDD(Horizontal directional drilling ) project, we have Rock reamers for hard formation. Our Roller bit core barrel is widely used for piling foundation too.