年表作成・共有サービス - pastport

https://www.ucradiator.com/radiator-replacement-cost/hyundai-elantra-radiator-replacement-cost.html

The hyundai elantra radiator replacement belongs to cooling system. The average hyundai elantra radiator price is between $1 and $30.

This paper mainly introduces the radiation medium of the hyundai radiator replacement.

The cooling water in the 2001 hyundai elantra radiator replacement is not pure water, but a mixture of water (in accordance with the quality of drinking water), antifreeze (usually ethylene glycol) and various special-purpose preservatives, also known as coolant. The content of antifreeze in these coolants accounts for 30%-50%, which increases the boiling point of the liquid. Under certain working pressure, the allowable working temperature of car coolant can reach 120 degrees Celsius, which exceeds the boiling point of water and is not easy to evaporate.

Sealed cooling media are widely used in hyundai elantra engines, and antifreeze liquid with antiseptic additives is generally used. It is much less corrosive to cooling system metals than common tap water, and is conducive to improving heat dissipation performance. Closed cooling system can ensure that the engine does not add coolant for a long time. Sealing must be guaranteed in use in order to achieve results. The coolant in the expansion tank cannot be filled up and can only add 1/2.

After 2 years of use, let out the filter, adjust the ingredients and freezing point and continue to use. If the cooling system is filled with tap water, in winter, if the vehicle is parked in the open air, the water in the radiator and cylinder body should be discharged at night to prevent frost damage to the radiator and engine. After the cooling water is clean, start the engine to run for 1 to 2 minutes to remove the water in the pump. Otherwise, the water in the pump will freeze at the water seal. The next day, the engine water seal will be damaged, resulting in water leakage of the pump.

Maintenance of the hyundai elantra radiator replacement
Radiator belongs to cooling system. The function of the hyundai elantra radiator replacement cooling system is to keep the car in an appropriate temperature range under all working conditions. This paper mainly introduces the use and maintenance of the hyundai elantra radiator replacement.
1. Radiators should not be in contact with any acid, alkali or other corrosive properties.
2. It is suggested to use soft water and hard water after softening treatment to avoid blockage and scaling in radiator.
3. Use antifreeze. In order to avoid the corrosion of radiators, it is necessary to use the long-term anti-rust and anti-freeze liquid manufactured by regular manufacturers and in conformity with the national standards.
4. In the process of installing the radiator, do not damage the radiator ribbon (sheet) or touch the radiator, in order to ensure the cooling capacity and sealing.
5. When the radiator completely drains water and then injects water, the water release switch of the engine block should be turned on first, and then closed when water flows out, so as to avoid blisters.
6. Water level should be checked at any time in daily use, and water should be added after shutdown and cooling. When adding water, the cover of the water tank should be opened slowly, and the operator's body should be as far away as possible from the nozzle, in order to prevent the high-pressure steam from ejecting from the nozzle causing scald.
7. In winter, in order to prevent core ruptures caused by ice, such as long-term parking or indirect parking, water tank cover and water discharge switch should be put out.
8. The effective environment of spare radiators should be kept ventilated and dry.
9. According to the actual situation, the user should clean the core of the radiator completely within 1-3 months. When cleaning, rinse with clean water along the side of the reverse inlet air.
10. The water level gauge should be cleaned every 3 months or, depending on the actual situation, the components should be removed and cleaned with warm water and non-corrosive detergent.