年表作成・共有サービス - pastport

https://www.hoanisolator.com/application-of-wire-rope-isolator-in-vibration-and-shock-isolation.html

The wire rope isolator is an elastic body made of stainless steel wire ropes and fixed by stainless steel splints. It can effectively avoid strong resonance and impact, and achieve the purpose of aerospace vibration isolator, shock resistance and buffering.

With the deepening of isolation research and the development of isolation technology, nonlinear isolators suitable for various occasions have emerged. Laminated springs for the automotive industry are widely used in China. The principle is to use the dry friction between the steel plates to reduce the vibration and impact caused by the unevenness of the road. There are metal conical coil springs for the civil industry, as well as air springs.

During the entire deformation process of the wire rope shock mounts, sliding friction will occur between each wire rope, which consumes a large amount of energy and has a high equivalent damping ratio. Moreover, the wire rope anti vibration mounts exhibit nonlinear softening characteristics in a large deformation range, the stiffness decreases as the deformation increases, and the vibration isolation rate increases. Therefore, the good broadband isolation performance of the wire rope vibration dampers is especially suitable for the application of vibration and shock environment isolation.

The wire rope shock mounts have only been developed in the last 30 years.

Advantages of Wire Rope Anti Vibration Mounts
① Nonlinear soft characteristics;
② Multi-directional isolation, high damping ratio;
③ Corrosion, high and low temperature resistance;
④ Compact structure and light weight.

Classification of Wire Rope Anti Vibration Mounts
At present, the common wire rope anti vibration mounts have several types of spiral, arch and ring. But in either case, they are made of stainless steel wire rope wound or bent.

Their common advantage is the three-way protection of the equipment, reliable operation in high temperature and harsh environments, wide load range, unlimited storage period and service life. In terms of impact resistance, The wire rope shock mount can achieve maximum impact attenuation in a minimum space, and its vertical allowable deformation can reach 40~60% of the height of the vibration isolator.

In foreign countries, they are used in the transportation of some equipment to replace the impact-resistant packaging of raw plastics and rubber. Rocket and missile transport vehicles also use it. In terms of ships, it passed the tests of light impact machines, heavy impact machines and floating impact platforms to meet the requirements of MIL-S-901 and MIL-STD-167. The compact wire rope isolator has excellent durability and fatigue. A vibration isolator with a diameter of 2.4 mm has been tested for up to 150 hours and seven million tests at 13 Hz and ±1.5 mm amplitude. The result is safe and sound.

For a 1.5 mm wire rope isolator damping with a 1.5 mm diameter, a sweep vibration test up to 10KHZ was performed, and the vibration isolation effect was 95%. This proves that the wire rope isolator for vibration damping can isolate small amplitude and structural noise. Wire rope anti vibration mounts are widely used in vibration and shock isolation of instruments, instruments, control boxes, etc., and some original rubber vibration isolators have been replaced by wire rope shock mounts.

Hoan has high-quality compact wire rope isolators damping for sale, contact us now.